* [PATCH v2 01/25] Staging: rtl8192u: r819xU_phy.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
@ 2017-02-13 5:39 ` Derek Robson
2017-02-14 17:23 ` Greg KH
2017-02-13 5:39 ` [PATCH v2 02/25] Staging: rtl8192u: r819xU_firmware.c " Derek Robson
` (23 subsequent siblings)
24 siblings, 1 reply; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:39 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/r819xU_phy.c | 41 +++++++++++++++++++++++------------
1 file changed, 27 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index 696df3440077..c99130fdb8ee 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -367,7 +367,8 @@ static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
/* Firmware RF Write control.
* We can not execute the scheme in the initial step.
* Otherwise, RF-R/W will waste much time.
- * This is only for site survey. */
+ * This is only for site survey.
+ */
/* 1. Read operation need not insert data. bit 0-11 */
/* 2. Write RF register address. bit 12-19 */
data |= ((offset&0xFF)<<12);
@@ -380,7 +381,8 @@ static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
read_nic_dword(dev, QPNR, &tmp);
while (tmp & 0x80000000) {
/* If FW can not finish RF-R/W for more than ?? times.
- We must reset FW. */
+ * We must reset FW.
+ */
if (time++ < 100) {
udelay(10);
read_nic_dword(dev, QPNR, &tmp);
@@ -394,7 +396,8 @@ static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
read_nic_dword(dev, QPNR, &tmp);
while (tmp & 0x80000000) {
/* If FW can not finish RF-R/W for more than ?? times.
- We must reset FW. */
+ * We must reset FW.
+ */
if (time++ < 100) {
udelay(10);
read_nic_dword(dev, QPNR, &tmp);
@@ -426,7 +429,8 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
/* Firmware RF Write control.
* We can not execute the scheme in the initial step.
* Otherwise, RF-R/W will waste much time.
- * This is only for site survey. */
+ * This is only for site survey.
+ */
/* 1. Set driver write bit and 12 bit data. bit 0-11 */
/* 2. Write RF register address. bit 12-19 */
@@ -442,7 +446,8 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
read_nic_dword(dev, QPNR, &tmp);
while (tmp & 0x80000000) {
/* If FW can not finish RF-R/W for more than ?? times.
- We must reset FW. */
+ * We must reset FW.
+ */
if (time++ < 100) {
udelay(10);
read_nic_dword(dev, QPNR, &tmp);
@@ -451,10 +456,12 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
}
}
/* 7. No matter check bit. We always force the write.
- Because FW will not accept the command. */
+ * Because FW will not accept the command.
+ */
write_nic_dword(dev, QPNR, data);
/* According to test, we must delay 20us to wait firmware
- to finish RF write operation. */
+ * to finish RF write operation.
+ */
/* We support delay in firmware side now. */
}
@@ -723,7 +730,8 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock,
WriteAddr[HW90_BLOCK_RF],
bMask12Bits, WriteData[i]);
/* TODO: we should not delay for such a long time.
- Ask SD3 */
+ * Ask SD3
+ */
usleep_range(1000, 1000);
reg = rtl8192_phy_QueryRFReg(dev, eRFPath,
WriteAddr[HW90_BLOCK_RF],
@@ -820,7 +828,8 @@ static void rtl8192_BB_Config_ParaFile(struct net_device *dev)
}
/* Check if the CCK HighPower is turned ON.
- This is used to calculate PWDB. */
+ * This is used to calculate PWDB.
+ */
priv->bCckHighPower = (u8)rtl8192_QueryBBReg(dev,
rFPGA0_XA_HSSIParameter2,
0x200);
@@ -839,7 +848,8 @@ void rtl8192_BBConfig(struct net_device *dev)
rtl8192_InitBBRFRegDef(dev);
/* config BB&RF. As hardCode based initialization has not been well
* implemented, so use file first.
- * FIXME: should implement it for hardcode? */
+ * FIXME: should implement it for hardcode?
+ */
rtl8192_BB_Config_ParaFile(dev);
}
@@ -1158,7 +1168,8 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
switch (pHalData->eRFPowerState) {
case eRfOff:
/* If Rf off reason is from IPS,
- LED should blink with no link */
+ * LED should blink with no link
+ */
if (pMgntInfo->RfOffReason == RF_CHANGE_BY_IPS)
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK);
else
@@ -1168,7 +1179,7 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
case eRfOn:
/* Turn on RF we are still linked, which might
- happen when we quickly turn off and on HW RF.
+ * happen when we quickly turn off and on HW RF.
*/
if (pMgntInfo->bMediaConnect)
Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK);
@@ -1263,7 +1274,8 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
if (!IsLegalChannel(priv->ieee80211, channel)) {
RT_TRACE(COMP_ERR, "set to illegal channel: %d\n", channel);
/* return true to tell upper caller function this channel
- setting is finished! Or it will in while loop. */
+ * setting is finished! Or it will in while loop.
+ */
return true;
}
/* FIXME: need to check whether channel is legal or not here */
@@ -1609,7 +1621,8 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
}
/* Skip over setting of J-mode in BB register here.
- Default value is "None J mode". */
+ * Default value is "None J mode".
+ */
/* <3> Set RF related register */
switch (priv->rf_chip) {
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 02/25] Staging: rtl8192u: r819xU_firmware.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
2017-02-13 5:39 ` [PATCH v2 01/25] Staging: rtl8192u: r819xU_phy.c - style fix Derek Robson
@ 2017-02-13 5:39 ` Derek Robson
2017-02-13 5:39 ` [PATCH v2 03/25] Staging: rtl8192u: r819xU_cmdpkt.h " Derek Robson
` (22 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:39 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/r819xU_firmware.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index 08302dfb0d90..38b17f8d921a 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -10,7 +10,7 @@
* Returns:
* NDIS_STATUS_FAILURE - the following initialization process should be terminated
* NDIS_STATUS_SUCCESS - if firmware initialization process success
-**************************************************************************************************/
+ **************************************************************************************************/
#include "r8192U.h"
#include "r8192U_hw.h"
@@ -62,7 +62,7 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
/* Allocate skb buffer to contain firmware info and tx descriptor info
* add 4 to avoid packet appending overflow.
- * */
+ */
skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4);
if (!skb)
return false;
@@ -277,7 +277,7 @@ bool init_firmware(struct net_device *dev)
* 2. each packet segment will be put in the skb_buff packet.
* 3. each skb_buff packet data content will already include the firmware info
* and Tx descriptor info
- * */
+ */
rt_status = fw_download_code(dev, mapped_file, file_length);
if (rst_opt == OPT_SYSTEM_RESET)
release_firmware(fw_entry);
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 03/25] Staging: rtl8192u: r819xU_cmdpkt.h - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
2017-02-13 5:39 ` [PATCH v2 01/25] Staging: rtl8192u: r819xU_phy.c - style fix Derek Robson
2017-02-13 5:39 ` [PATCH v2 02/25] Staging: rtl8192u: r819xU_firmware.c " Derek Robson
@ 2017-02-13 5:39 ` Derek Robson
2017-02-13 5:40 ` [PATCH v2 04/25] Staging: rtl8192u: r819xU_cmdpkt.c " Derek Robson
` (21 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:39 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments.
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/r819xU_cmdpkt.h | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.h b/drivers/staging/rtl8192u/r819xU_cmdpkt.h
index f490e253ee50..ad0f6003570d 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.h
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.h
@@ -55,7 +55,8 @@ typedef struct tag_cmd_pkt_tx_feedback {
} cmpk_txfb_t;
/* 2. RX side: Interrupt status packet. It includes Beacon State,
- * Beacon Timer Interrupt and other useful informations in MAC ISR Reg. */
+ * Beacon Timer Interrupt and other useful informations in MAC ISR Reg.
+ */
typedef struct tag_cmd_pkt_interrupt_status {
u8 element_id; /* Command packet type. */
u8 length; /* Command packet length. */
@@ -83,13 +84,15 @@ typedef struct tag_cmd_pkt_set_configuration {
} cmpk_set_cfg_t;
/* 4. Both side : TX/RX query configuraton packet. The query structure is the
- same as set configuration. */
+ * same as set configuration.
+ */
#define cmpk_query_cfg_t cmpk_set_cfg_t
/* 5. Multi packet feedback status. */
typedef struct tag_tx_stats_feedback {
/* For endian transfer --> Driver will not the same as
- firmware structure. */
+ * firmware structure.
+ */
/* DW 0 */
u16 reserve1;
u8 length; /* Command packet length */
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 04/25] Staging: rtl8192u: r819xU_cmdpkt.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (2 preceding siblings ...)
2017-02-13 5:39 ` [PATCH v2 03/25] Staging: rtl8192u: r819xU_cmdpkt.h " Derek Robson
@ 2017-02-13 5:40 ` Derek Robson
2017-02-13 5:40 ` [PATCH v2 05/25] Staging: rtl8192u: r8192U_hw.h " Derek Robson
` (20 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:40 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
Version #1 had a problem where I commented out valid code.
drivers/staging/rtl8192u/r819xU_cmdpkt.c | 82 ++++++++++++++++++++------------
1 file changed, 52 insertions(+), 30 deletions(-)
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
index 1168d133522e..7db98f1fa2b8 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c
@@ -34,7 +34,8 @@ rt_status SendTxCommandPacket(struct net_device *dev, void *pData, u32 DataLen)
unsigned char *ptr_buf;
/* Get TCB and local buffer from common pool.
- (It is shared by CmdQ, MgntQ, and USB coalesce DataQ) */
+ * (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
+ */
skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + DataLen + 4);
if (!skb)
return RT_STATUS_FAILURE;
@@ -76,7 +77,8 @@ rt_status SendTxCommandPacket(struct net_device *dev, void *pData, u32 DataLen)
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_count_txstatistic(struct net_device *dev, cmpk_txfb_t *pstx_fb)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -87,8 +89,9 @@ static void cmpk_count_txstatistic(struct net_device *dev, cmpk_txfb_t *pstx_fb)
(pu1Byte)(&rtState));
/* When RF is off, we should not count the packet for hw/sw synchronize
- reason, ie. there may be a duration while sw switch is changed and
- hw switch is being changed. */
+ * reason, ie. there may be a duration while sw switch is changed and
+ * hw switch is being changed.
+ */
if (rtState == eRfOff)
return;
#endif
@@ -98,8 +101,9 @@ static void cmpk_count_txstatistic(struct net_device *dev, cmpk_txfb_t *pstx_fb)
return;
#endif
/* We can not know the packet length and transmit type:
- broadcast or uni or multicast. So the relative statistics
- must be collected in tx feedback info. */
+ * broadcast or uni or multicast. So the relative statistics
+ * must be collected in tx feedback info.
+ */
if (pstx_fb->tok) {
priv->stats.txfeedbackok++;
priv->stats.txoktotal++;
@@ -155,7 +159,8 @@ static void cmpk_count_txstatistic(struct net_device *dev, cmpk_txfb_t *pstx_fb)
* When Who Remark
* 05/08/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_handle_tx_feedback(struct net_device *dev, u8 *pmsg)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -165,8 +170,9 @@ static void cmpk_handle_tx_feedback(struct net_device *dev, u8 *pmsg)
/* 1. Extract TX feedback info from RFD to temp structure buffer. */
/* It seems that FW use big endian(MIPS) and DRV use little endian in
- windows OS. So we have to read the content byte by byte or transfer
- endian type before copy the message copy. */
+ * windows OS. So we have to read the content byte by byte or transfer
+ * endian type before copy the message copy.
+ */
/* Use pointer to transfer structure memory. */
memcpy((u8 *)&rx_tx_fb, pmsg, sizeof(cmpk_txfb_t));
/* 2. Use tx feedback info to count TX statistics. */
@@ -174,7 +180,8 @@ static void cmpk_handle_tx_feedback(struct net_device *dev, u8 *pmsg)
/* Comment previous method for TX statistic function. */
/* Collect info TX feedback packet to fill TCB. */
/* We can not know the packet length and transmit type: broadcast or uni
- or multicast. */
+ * or multicast.
+ */
}
static void cmdpkt_beacontimerinterrupt_819xusb(struct net_device *dev)
@@ -215,7 +222,8 @@ static void cmdpkt_beacontimerinterrupt_819xusb(struct net_device *dev)
* When Who Remark
* 05/12/2008 amy Add this for rtl8192 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_handle_interrupt_status(struct net_device *dev, u8 *pmsg)
{
cmpk_intr_sta_t rx_intr_status; /* */
@@ -225,8 +233,9 @@ static void cmpk_handle_interrupt_status(struct net_device *dev, u8 *pmsg)
/* 1. Extract TX feedback info from RFD to temp structure buffer. */
/* It seems that FW use big endian(MIPS) and DRV use little endian in
- windows OS. So we have to read the content byte by byte or transfer
- endian type before copy the message copy. */
+ * windows OS. So we have to read the content byte by byte or transfer
+ * endian type before copy the message copy.
+ */
rx_intr_status.length = pmsg[1];
if (rx_intr_status.length != (sizeof(cmpk_intr_sta_t) - 2)) {
DMESG("cmpk_Handle_Interrupt_Status: wrong length!\n");
@@ -276,15 +285,17 @@ static void cmpk_handle_interrupt_status(struct net_device *dev, u8 *pmsg)
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_handle_query_config_rx(struct net_device *dev, u8 *pmsg)
{
cmpk_query_cfg_t rx_query_cfg;
/* 1. Extract TX feedback info from RFD to temp structure buffer. */
/* It seems that FW use big endian(MIPS) and DRV use little endian in
- windows OS. So we have to read the content byte by byte or transfer
- endian type before copy the message copy. */
+ * windows OS. So we have to read the content byte by byte or transfer
+ * endian type before copy the message copy.
+ */
rx_query_cfg.cfg_action = (pmsg[4] & 0x80000000) >> 31;
rx_query_cfg.cfg_type = (pmsg[4] & 0x60) >> 5;
rx_query_cfg.cfg_size = (pmsg[4] & 0x18) >> 3;
@@ -312,7 +323,8 @@ static void cmpk_handle_query_config_rx(struct net_device *dev, u8 *pmsg)
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_count_tx_status(struct net_device *dev,
cmpk_tx_status_t *pstx_status)
{
@@ -326,8 +338,9 @@ static void cmpk_count_tx_status(struct net_device *dev,
(pu1Byte)(&rtState));
/* When RF is off, we should not count the packet for hw/sw synchronize
- reason, ie. there may be a duration while sw switch is changed and
- hw switch is being changed. */
+ * reason, ie. there may be a duration while sw switch is changed and
+ * hw switch is being changed.
+ */
if (rtState == eRfOff)
return;
#endif
@@ -373,7 +386,8 @@ static void cmpk_count_tx_status(struct net_device *dev,
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_handle_tx_status(struct net_device *dev, u8 *pmsg)
{
cmpk_tx_status_t rx_tx_sts;
@@ -398,7 +412,8 @@ static void cmpk_handle_tx_status(struct net_device *dev, u8 *pmsg)
* When Who Remark
* 05/12/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
{
cmpk_tx_rahis_t *ptxrate;
@@ -412,8 +427,9 @@ static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
(pu1Byte)(&rtState));
/* When RF is off, we should not count the packet for hw/sw synchronize
- reason, ie. there may be a duration while sw switch is changed and
- hw switch is being changed. */
+ * reason, ie. there may be a duration while sw switch is changed and
+ * hw switch is being changed.
+ */
if (rtState == eRfOff)
return;
#endif
@@ -421,7 +437,8 @@ static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
ptemp = (u32 *)pmsg;
/* Do endian transfer to word alignment(16 bits) for windows system.
- You must do different endian transfer for linux and MAC OS */
+ * You must do different endian transfer for linux and MAC OS
+ */
for (i = 0; i < (length/4); i++) {
u16 temp1, temp2;
@@ -468,7 +485,8 @@ static void cmpk_handle_tx_rate_history(struct net_device *dev, u8 *pmsg)
* When Who Remark
* 05/06/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
u32 cmpk_message_handle_rx(struct net_device *dev,
struct ieee80211_rx_stats *pstats)
{
@@ -478,7 +496,8 @@ u32 cmpk_message_handle_rx(struct net_device *dev,
u8 *pcmd_buff;
/* 0. Check inpt arguments. If is is a command queue message or
- pointer is null. */
+ * pointer is null.
+ */
if (pstats == NULL)
return 0; /* This is not a command packet. */
@@ -492,10 +511,12 @@ u32 cmpk_message_handle_rx(struct net_device *dev,
element_id = pcmd_buff[0];
/* 4. Check every received command packet content according to different
- element type. Because FW may aggregate RX command packet to
- minimize transmit time between DRV and FW.*/
+ * element type. Because FW may aggregate RX command packet to
+ * minimize transmit time between DRV and FW.
+ */
/* Add a counter to prevent the lock in the loop from being held too
- long */
+ * long
+ */
while (total_length > 0 && exe_cnt++ < 100) {
/* We support aggregation of different cmd in the same packet */
element_id = pcmd_buff[0];
@@ -523,7 +544,8 @@ u32 cmpk_message_handle_rx(struct net_device *dev,
case RX_TX_PER_PKT_FEEDBACK:
/* You must at lease add a switch case element here,
- Otherwise, we will jump to default case. */
+ * Otherwise, we will jump to default case.
+ */
cmd_length = CMPK_RX_TX_FB_SIZE;
break;
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 05/25] Staging: rtl8192u: r8192U_hw.h - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (3 preceding siblings ...)
2017-02-13 5:40 ` [PATCH v2 04/25] Staging: rtl8192u: r819xU_cmdpkt.c " Derek Robson
@ 2017-02-13 5:40 ` Derek Robson
2017-02-13 5:40 ` [PATCH v2 06/25] Staging: rtl8192u: r8192U_dm.c " Derek Robson
` (19 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:40 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/r8192U_hw.h | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h
index e07d65d04dbc..174ccf618d3e 100644
--- a/drivers/staging/rtl8192u/r8192U_hw.h
+++ b/drivers/staging/rtl8192u/r8192U_hw.h
@@ -1,18 +1,18 @@
/*
- This is part of rtl8187 OpenSource driver.
- Copyright (C) Andrea Merello 2004-2005 <andrea.merello@gmail.com>
- Released under the terms of GPL (General Public Licence)
-
- Parts of this driver are based on the GPL part of the
- official Realtek driver.
- Parts of this driver are based on the rtl8180 driver skeleton
- from Patric Schenke & Andres Salomon.
- Parts of this driver are based on the Intel Pro Wireless
- 2100 GPL driver.
-
- We want to thank the Authors of those projects
- and the Ndiswrapper project Authors.
-*/
+ * This is part of rtl8187 OpenSource driver.
+ * Copyright (C) Andrea Merello 2004-2005 <andrea.merello@gmail.com>
+ * Released under the terms of GPL (General Public Licence)
+ *
+ * Parts of this driver are based on the GPL part of the
+ * official Realtek driver.
+ * Parts of this driver are based on the rtl8180 driver skeleton
+ * from Patric Schenke & Andres Salomon.
+ * Parts of this driver are based on the Intel Pro Wireless
+ * 2100 GPL driver.
+ *
+ * We want to thank the Authors of those projects
+ * and the Ndiswrapper project Authors.
+ */
/* Mariusz Matuszek added full registers definition with Realtek's name */
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 06/25] Staging: rtl8192u: r8192U_dm.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (4 preceding siblings ...)
2017-02-13 5:40 ` [PATCH v2 05/25] Staging: rtl8192u: r8192U_hw.h " Derek Robson
@ 2017-02-13 5:40 ` Derek Robson
2017-02-13 5:40 ` [PATCH v2 07/25] Staging: rtl8192u: r8192U_core.c " Derek Robson
` (18 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:40 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/r8192U_dm.c | 175 +++++++++++++++++++----------------
1 file changed, 97 insertions(+), 78 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index 9209aad0515e..9f05280e557b 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -1,18 +1,18 @@
-/*++
-Copyright-c Realtek Semiconductor Corp. All rights reserved.
-
-Module Name:
- r8192U_dm.c
-
-Abstract:
- HW dynamic mechanism.
-
-Major Change History:
- When Who What
- ---------- --------------- -------------------------------
- 2008-05-14 amy create version 0 porting from windows code.
-
---*/
+/*
+ * Copyright-c Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Module Name:
+ * r8192U_dm.c
+ *
+ * Abstract:
+ * HW dynamic mechanism.
+ *
+ * Major Change History:
+ * When Who What
+ * ---------- --------------- -------------------------------
+ * 2008-05-14 amy create version 0 porting from windows code.
+ *
+ */
#include "r8192U.h"
#include "r8192U_dm.h"
#include "r8192U_hw.h"
@@ -158,20 +158,20 @@ void dm_CheckRxAggregation(struct net_device *dev)
unsigned long curRxOkCnt = 0;
/*
- if (pHalData->bForcedUsbRxAggr) {
- if (pHalData->ForcedUsbRxAggrInfo == 0) {
- if (pHalData->bCurrentRxAggrEnable) {
- Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE);
- }
- } else {
- if (!pHalData->bCurrentRxAggrEnable || (pHalData->ForcedUsbRxAggrInfo != pHalData->LastUsbRxAggrInfoSetting)) {
- Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, TRUE);
- }
- }
- return;
- }
-
-*/
+ * if (pHalData->bForcedUsbRxAggr) {
+ * if (pHalData->ForcedUsbRxAggrInfo == 0) {
+ * if (pHalData->bCurrentRxAggrEnable) {
+ * Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE);
+ * }
+ * } else {
+ * if (!pHalData->bCurrentRxAggrEnable || (pHalData->ForcedUsbRxAggrInfo != pHalData->LastUsbRxAggrInfoSetting)) {
+ * Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, TRUE);
+ * }
+ * }
+ * return;
+ * }
+ *
+ */
curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
@@ -293,7 +293,8 @@ void init_rate_adaptive(struct net_device *dev)
* When Who Remark
* 05/26/08 amy Create version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void dm_check_rate_adaptive(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -347,9 +348,10 @@ static void dm_check_rate_adaptive(struct net_device *dev)
((bshort_gi_enabled) ? BIT(31) : 0);
/* 2007/10/08 MH We support RA smooth scheme now. When it is the first
- time to link with AP. We will not change upper/lower threshold. If
- STA stay in high or low level, we must change two different threshold
- to prevent jumping frequently. */
+ * time to link with AP. We will not change upper/lower threshold. If
+ * STA stay in high or low level, we must change two different threshold
+ * to prevent jumping frequently.
+ */
if (pra->ratr_state == DM_RATR_STA_HIGH) {
HighRSSIThreshForRA = pra->high2low_rssi_thresh_for_ra;
LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) ?
@@ -391,7 +393,8 @@ static void dm_check_rate_adaptive(struct net_device *dev)
ping_rssi_state = 1;
}
/*else
- DbgPrint("TestRSSI is between the range.\n");*/
+ * DbgPrint("TestRSSI is between the range.\n");
+ */
} else {
/*DbgPrint("TestRSSI Recover to 0x%x\n", targetRATR);*/
ping_rssi_state = 0;
@@ -732,8 +735,9 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
tmpCCK40Mindex = 0;
}
/*DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d, tmpCCK40Mindex = %d",
- ((u1Byte)tmpRegA - pHalData->ThermalMeter[0]),
- tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex);*/
+ * ((u1Byte)tmpRegA - pHalData->ThermalMeter[0]),
+ * tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex);
+ */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) /* 40M */
tmpCCKindex = tmpCCK40Mindex;
else
@@ -1623,7 +1627,8 @@ static void dm_bb_initialgain_backup(struct net_device *dev)
* When Who Remark
* 05/29/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
void dm_change_dynamic_initgain_thresh(struct net_device *dev, u32 dm_type,
u32 dm_value)
@@ -1714,7 +1719,8 @@ void dm_change_dynamic_initgain_thresh(struct net_device *dev, u32 dm_type,
* When Who Remark
* 05/15/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void dm_dig_init(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1761,7 +1767,8 @@ static void dm_dig_init(struct net_device *dev)
* Revised History:
* When Who Remark
* 05/27/2008 amy Create Version 0 porting from windows code.
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void dm_ctrl_initgain_byrssi(struct net_device *dev)
{
if (!dm_digtable.dig_enable_flag)
@@ -1804,7 +1811,8 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
dm_digtable.cur_connect_state = DIG_DISCONNECT;
/*DbgPrint("DM_DigTable.PreConnectState = %d, DM_DigTable.CurConnectState = %d\n",
- DM_DigTable.PreConnectState, DM_DigTable.CurConnectState);*/
+ * DM_DigTable.PreConnectState, DM_DigTable.CurConnectState);
+ */
if (dm_digtable.dbg_mode == DM_DBG_OFF)
dm_digtable.rssi_val = priv->undecorated_smoothed_pwdb;
@@ -1846,14 +1854,17 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
/*DbgPrint("Dig by Fw False Alarm\n");*/
/*if (DM_DigTable.Dig_State == DM_STA_DIG_OFF)*/
- /*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
- pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
- DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/
+ /* DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d",
+ * pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh,
+ * DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);
+ */
/* 1. When RSSI decrease, We have to judge if it is smaller than a threshold
- and then execute the step below. */
+ * and then execute the step below.
+ */
if (priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh) {
/* 2008/02/05 MH When we execute silent reset, the DIG PHY parameters
- will be reset to init value. We must prevent the condition. */
+ * will be reset to init value. We must prevent the condition.
+ */
if (dm_digtable.dig_state == DM_STA_DIG_OFF &&
(priv->reset_count == reset_cnt)) {
return;
@@ -1881,11 +1892,11 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
*/
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40);
- else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
- else
- PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x40);
- */
+ * write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40);
+ *else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
+ *else
+ *PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x40);
+ */
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
@@ -1899,7 +1910,8 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
}
/* 2. When RSSI increase, We have to judge if it is larger than a threshold
- and then execute the step below. */
+ * and then execute the step below.
+ */
if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) {
u8 reset_flag = 0;
@@ -1940,12 +1952,12 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
*/
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
/*
- else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
- else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
- else
- PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x42);
- */
+ *else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
+ * write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+ *else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E)
+ *else
+ *PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x42);
+ */
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
@@ -1982,7 +1994,8 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
* When Who Remark
* 05/28/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void dm_ctrl_initgain_byrssi_highpwr(
struct net_device *dev)
{
@@ -2011,8 +2024,8 @@ static void dm_ctrl_initgain_byrssi_highpwr(
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
- */
+ * write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
+ */
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x43);
@@ -2028,8 +2041,8 @@ static void dm_ctrl_initgain_byrssi_highpwr(
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
- */
+ * write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+ */
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
@@ -2150,8 +2163,8 @@ static void dm_pd_th(
*/
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00);
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
- */
+ * write_nic_byte(dev, rOFDM0_RxDetector1, 0x40);
+ */
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
} else if (dm_digtable.curpd_thstate == DIG_PD_AT_NORMAL_POWER) {
@@ -2163,8 +2176,8 @@ static void dm_pd_th(
*/
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
- */
+ * write_nic_byte(dev, rOFDM0_RxDetector1, 0x42);
+ */
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x44);
} else if (dm_digtable.curpd_thstate == DIG_PD_AT_HIGH_POWER) {
@@ -2172,8 +2185,8 @@ static void dm_pd_th(
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10);
/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P)
- write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
- */
+ * write_nic_byte(dev, rOFDM0_RxDetector1, 0x41);
+ */
} else
write_nic_byte(dev, rOFDM0_RxDetector1, 0x43);
}
@@ -2366,10 +2379,10 @@ static void dm_ctstoself(struct net_device *dev)
return;
}
/*
- 1. Uplink
- 2. Linksys350/Linksys300N
- 3. <50 disable, >55 enable
- */
+ * 1. Uplink
+ * 2. Linksys350/Linksys300N
+ * 3. <50 disable, >55 enable
+ */
if (pHTInfo->IOTPeer == HT_IOT_PEER_BROADCOM) {
curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt;
@@ -2401,7 +2414,8 @@ static void dm_ctstoself(struct net_device *dev)
* When Who Remark
* 05/28/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void dm_check_pbc_gpio(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -2437,7 +2451,8 @@ static void dm_check_pbc_gpio(struct net_device *dev)
* When Who Remark
* 01/30/2008 MHC Create Version 0.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
void dm_rf_pathcheck_workitemcallback(struct work_struct *work)
{
struct delayed_work *dwork = to_delayed_work(work);
@@ -2447,7 +2462,8 @@ void dm_rf_pathcheck_workitemcallback(struct work_struct *work)
u8 rfpath = 0, i;
/* 2008/01/30 MH After discussing with SD3 Jerry, 0xc04/0xd04 register will
- always be the same. We only read 0xc04 now. */
+ * always be the same. We only read 0xc04 now.
+ */
read_nic_byte(dev, 0xc04, &rfpath);
/* Check Bit 0-3, it means if RF A-D is enabled. */
@@ -2694,7 +2710,8 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)
* When Who Remark
* 05/28/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void dm_check_rx_path_selection(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -3017,7 +3034,8 @@ void dm_check_fsync(struct net_device *dev)
* When Who Remark
* 05/29/2008 amy Create Version 0 porting from windows code.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
void dm_shadow_init(struct net_device *dev)
{
u8 page;
@@ -3056,7 +3074,8 @@ void dm_shadow_init(struct net_device *dev)
* When Who Remark
* 03/06/2008 Jacken Create Version 0.
*
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static void dm_init_dynamic_txpower(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 07/25] Staging: rtl8192u: r8192U_core.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (5 preceding siblings ...)
2017-02-13 5:40 ` [PATCH v2 06/25] Staging: rtl8192u: r8192U_dm.c " Derek Robson
@ 2017-02-13 5:40 ` Derek Robson
2017-02-13 5:41 ` [PATCH v2 08/25] Staging: rtl8192u: r8192U.h " Derek Robson
` (17 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:40 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/r8192U_core.c | 70 +++++++++++++++++-----------------
1 file changed, 35 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index fdb03dccb449..1fd1ee960328 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -503,8 +503,7 @@ static void watch_dog_timer_callback(unsigned long data);
/****************************************************************************
* -----------------------------PROCFS STUFF-------------------------
-*****************************************************************************
- */
+ ****************************************************************************/
static struct proc_dir_entry *rtl8192_proc;
@@ -715,8 +714,8 @@ static void rtl8192_proc_remove_one(struct net_device *dev)
}
/****************************************************************************
- -----------------------------MISC STUFF-------------------------
-*****************************************************************************/
+ * -----------------------------MISC STUFF-------------------------
+ *****************************************************************************/
short check_nic_enough_desc(struct net_device *dev, int queue_index)
{
@@ -1328,7 +1327,7 @@ short rtl819xU_tx_cmd(struct net_device *dev, struct sk_buff *skb)
* 2006.10.30 by Emily
*
* \param QUEUEID Software Queue
-*/
+ */
static u8 MapHwQueueToFirmwareQueue(u8 QueueID)
{
u8 QueueSelect = 0x0; /* default set to */
@@ -1499,7 +1498,7 @@ static void tx_zero_isr(struct urb *tx_urb)
* The tx procedure is just as following,
* skb->cb will contain all the following information,
* priority, morefrag, rate, &dev.
- * */
+ */
short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -1840,8 +1839,8 @@ static void rtl8192_update_beacon(struct work_struct *work)
}
/*
-* background support to run QoS activate functionality
-*/
+ * background support to run QoS activate functionality
+ */
static int WDCAPARA_ADD[] = {EDCAPARA_BE, EDCAPARA_BK,
EDCAPARA_VI, EDCAPARA_VO};
static void rtl8192_qos_activate(struct work_struct *work)
@@ -1946,10 +1945,10 @@ static int rtl8192_handle_beacon(struct net_device *dev,
}
/*
-* handling the beaconing responses. if we get different QoS setting
-* off the network from the associated setting, adjust the QoS
-* setting
-*/
+ * handling the beaconing responses. if we get different QoS setting
+ * off the network from the associated setting, adjust the QoS
+ * setting
+ */
static int rtl8192_qos_association_resp(struct r8192_priv *priv,
struct ieee80211_network *network)
{
@@ -3045,8 +3044,8 @@ static bool rtl8192_adapter_start(struct net_device *dev)
* be used to stop beacon transmission
*/
/***************************************************************************
- -------------------------------NET STUFF---------------------------
-***************************************************************************/
+ * -------------------------------NET STUFF---------------------------
+ ***************************************************************************/
static struct net_device_stats *rtl8192_stats(struct net_device *dev)
{
@@ -3074,9 +3073,9 @@ static bool HalTxCheckStuck819xUsb(struct net_device *dev)
}
/*
-* <Assumption: RT_TX_SPINLOCK is acquired.>
-* First added: 2006.11.19 by emily
-*/
+ * <Assumption: RT_TX_SPINLOCK is acquired.>
+ * First added: 2006.11.19 by emily
+ */
static RESET_TYPE TxCheckStuck(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -4156,7 +4155,8 @@ static void rtl8192_process_phyinfo(struct r8192_priv *priv, u8 *buffer,
* Output: NONE
*
* Return: 0-100 percentage
- *---------------------------------------------------------------------------*/
+ *---------------------------------------------------------------------------
+ */
static u8 rtl819x_query_rxpwrpercentage(s8 antpower)
{
if ((antpower <= -100) || (antpower >= 20))
@@ -4529,19 +4529,19 @@ static void TranslateRxSignalStuff819xUsb(struct sk_buff *skb,
}
/**
-* Function: UpdateReceivedRateHistogramStatistics
-* Overview: Record the received data rate
-*
-* Input:
-* struct net_device *dev
-* struct ieee80211_rx_stats *stats
-*
-* Output:
-*
-* (priv->stats.ReceivedRateHistogram[] is updated)
-* Return:
-* None
-*/
+ * Function: UpdateReceivedRateHistogramStatistics
+ * Overview: Record the received data rate
+ *
+ * Input:
+ * struct net_device *dev
+ * struct ieee80211_rx_stats *stats
+ *
+ * Output:
+ *
+ * (priv->stats.ReceivedRateHistogram[] is updated)
+ * Return:
+ * None
+ */
static void
UpdateReceivedRateHistogramStatistics8190(struct net_device *dev,
struct ieee80211_rx_stats *stats)
@@ -4935,8 +4935,8 @@ static const struct net_device_ops rtl8192_netdev_ops = {
/****************************************************************************
- ---------------------------- USB_STUFF---------------------------
-*****************************************************************************/
+ * ---------------------------- USB_STUFF---------------------------
+ *****************************************************************************/
static int rtl8192_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -5177,7 +5177,7 @@ void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType,
}
/***************************************************************************
- ------------------- module init / exit stubs ----------------
-****************************************************************************/
+ * ------------------- module init / exit stubs ----------------
+ ****************************************************************************/
module_init(rtl8192_usb_module_init);
module_exit(rtl8192_usb_module_exit);
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 08/25] Staging: rtl8192u: r8192U.h - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (6 preceding siblings ...)
2017-02-13 5:40 ` [PATCH v2 07/25] Staging: rtl8192u: r8192U_core.c " Derek Robson
@ 2017-02-13 5:41 ` Derek Robson
2017-02-13 5:41 ` [PATCH v2 09/25] Staging: rtl8192u: r8190_rtl8256.h " Derek Robson
` (16 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:41 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/r8192U.h | 39 ++++++++++++++++++++++++++-------------
1 file changed, 26 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index 0b7b04ea0910..a7ba8f37384e 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -626,7 +626,8 @@ typedef struct Stats {
long signal_quality;
long last_signal_strength_inpercent;
/* Correct smoothed ss in dbm, only used in driver
- * to report real power now */
+ * to report real power now
+ */
long recv_signal_power;
u8 rx_rssi_percentage[4];
u8 rx_evm_percentage[2];
@@ -672,32 +673,40 @@ typedef struct _BB_REGISTER_DEFINITION {
/* Tx gain stage: 0x80c~0x80f [4 bytes] */
u32 rfTxGainStage;
/* wire parameter control1: 0x820~0x823, 0x828~0x82b,
- * 0x830~0x833, 0x838~0x83b [16 bytes] */
+ * 0x830~0x833, 0x838~0x83b [16 bytes]
+ */
u32 rfHSSIPara1;
/* wire parameter control2: 0x824~0x827, 0x82c~0x82f,
- * 0x834~0x837, 0x83c~0x83f [16 bytes] */
+ * 0x834~0x837, 0x83c~0x83f [16 bytes]
+ */
u32 rfHSSIPara2;
/* Tx Rx antenna control: 0x858~0x85f [16 bytes] */
u32 rfSwitchControl;
/* AGC parameter control1: 0xc50~0xc53, 0xc58~0xc5b,
- * 0xc60~0xc63, 0xc68~0xc6b [16 bytes] */
+ * 0xc60~0xc63, 0xc68~0xc6b [16 bytes]
+ */
u32 rfAGCControl1;
/* AGC parameter control2: 0xc54~0xc57, 0xc5c~0xc5f,
- * 0xc64~0xc67, 0xc6c~0xc6f [16 bytes] */
+ * 0xc64~0xc67, 0xc6c~0xc6f [16 bytes]
+ */
u32 rfAGCControl2;
/* OFDM Rx IQ imbalance matrix: 0xc14~0xc17, 0xc1c~0xc1f,
- * 0xc24~0xc27, 0xc2c~0xc2f [16 bytes] */
+ * 0xc24~0xc27, 0xc2c~0xc2f [16 bytes]
+ */
u32 rfRxIQImbalance;
/* Rx IQ DC offset and Rx digital filter, Rx DC notch filter:
* 0xc10~0xc13, 0xc18~0xc1b,
- * 0xc20~0xc23, 0xc28~0xc2b [16 bytes] */
+ * 0xc20~0xc23, 0xc28~0xc2b [16 bytes]
+ */
u32 rfRxAFE;
/* OFDM Tx IQ imbalance matrix: 0xc80~0xc83, 0xc88~0xc8b,
- * 0xc90~0xc93, 0xc98~0xc9b [16 bytes] */
+ * 0xc90~0xc93, 0xc98~0xc9b [16 bytes]
+ */
u32 rfTxIQImbalance;
/* Tx IQ DC Offset and Tx DFIR type:
* 0xc84~0xc87, 0xc8c~0xc8f,
- * 0xc94~0xc97, 0xc9c~0xc9f [16 bytes] */
+ * 0xc94~0xc97, 0xc9c~0xc9f [16 bytes]
+ */
u32 rfTxAFE;
/* LSSI RF readback data: 0x8a0~0x8af [16 bytes] */
u32 rfLSSIReadBack;
@@ -776,7 +785,8 @@ typedef struct _phy_ofdm_rx_status_report_819xusb {
typedef struct _phy_cck_rx_status_report_819xusb {
/* For CCK rate descriptor. This is an unsigned 8:1 variable.
* LSB bit presend 0.5. And MSB 7 bts presend a signed value.
- * Range from -64~+63.5. */
+ * Range from -64~+63.5.
+ */
u8 adc_pwdb_X[4];
u8 sq_rpt;
u8 cck_agc_rpt;
@@ -991,7 +1001,8 @@ typedef struct r8192_priv {
/* Control channel sub-carrier */
u8 nCur40MhzPrimeSC;
/* Test for shorten RF configuration time.
- * We save RF reg0 in this variable to reduce RF reading. */
+ * We save RF reg0 in this variable to reduce RF reading.
+ */
u32 RfReg0Value[4];
u8 NumTotalRFPath;
bool brfpath_rxenable[4];
@@ -1009,11 +1020,13 @@ typedef struct r8192_priv {
bool bstore_last_dtpflag;
/* Define to discriminate on High power State or
- * on sitesurvey to change Tx gain index */
+ * on sitesurvey to change Tx gain index
+ */
bool bstart_txctrl_bydtp;
rate_adaptive rate_adaptive;
/* TX power tracking
- * OPEN/CLOSE TX POWER TRACKING */
+ * OPEN/CLOSE TX POWER TRACKING
+ */
txbbgain_struct txbbgain_table[TxBBGainTableLength];
u8 txpower_count; /* For 6 sec do tracking again */
bool btxpower_trackingInit;
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 09/25] Staging: rtl8192u: r8190_rtl8256.h - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (7 preceding siblings ...)
2017-02-13 5:41 ` [PATCH v2 08/25] Staging: rtl8192u: r8192U.h " Derek Robson
@ 2017-02-13 5:41 ` Derek Robson
2017-02-13 5:41 ` [PATCH v2 10/25] Staging: rtl8192u: r8190_rtl8256.c " Derek Robson
` (15 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:41 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/r8190_rtl8256.h | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.h b/drivers/staging/rtl8192u/r8190_rtl8256.h
index 1ba4f83b520e..5c325ce9d631 100644
--- a/drivers/staging/rtl8192u/r8190_rtl8256.h
+++ b/drivers/staging/rtl8192u/r8190_rtl8256.h
@@ -1,14 +1,14 @@
/*
- This is part of the rtl8180-sa2400 driver
- released under the GPL (See file COPYING for details).
- Copyright (c) 2005 Andrea Merello <andrea.merello@gmail.com>
-
- This files contains programming code for the rtl8256
- radio frontend.
-
- *Many* thanks to Realtek Corp. for their great support!
-
-*/
+ * This is part of the rtl8180-sa2400 driver
+ * released under the GPL (See file COPYING for details).
+ * Copyright (c) 2005 Andrea Merello <andrea.merello@gmail.com>
+ *
+ *
+ * This files contains programming code for the rtl8256
+ * radio frontend.
+ *
+ * *Many* thanks to Realtek Corp. for their great support!
+ */
#ifndef RTL8225H
#define RTL8225H
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 10/25] Staging: rtl8192u: r8190_rtl8256.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (8 preceding siblings ...)
2017-02-13 5:41 ` [PATCH v2 09/25] Staging: rtl8192u: r8190_rtl8256.h " Derek Robson
@ 2017-02-13 5:41 ` Derek Robson
2017-02-13 5:41 ` [PATCH v2 11/25] Staging: rtl8192u: r8180_93cx6.c " Derek Robson
` (14 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:41 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/r8190_rtl8256.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c b/drivers/staging/rtl8192u/r8190_rtl8256.c
index d733fb2ade91..e54f6fad2e68 100644
--- a/drivers/staging/rtl8192u/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192u/r8190_rtl8256.c
@@ -1,12 +1,12 @@
/*
-* This is part of the rtl8192 driver
-* released under the GPL (See file COPYING for details).
-*
-* This files contains programming code for the rtl8256
-* radio frontend.
-*
-* *Many* thanks to Realtek Corp. for their great support!
-*/
+ * This is part of the rtl8192 driver
+ * released under the GPL (See file COPYING for details).
+ *
+ * This files contains programming code for the rtl8256
+ * radio frontend.
+ *
+ * *Many* thanks to Realtek Corp. for their great support!
+ */
#include "r8192U.h"
#include "r8192U_hw.h"
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 11/25] Staging: rtl8192u: r8180_93cx6.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (9 preceding siblings ...)
2017-02-13 5:41 ` [PATCH v2 10/25] Staging: rtl8192u: r8190_rtl8256.c " Derek Robson
@ 2017-02-13 5:41 ` Derek Robson
2017-02-13 5:42 ` [PATCH v2 12/25] Staging: rtl8192u: ieee80211: ieee80211_crypt_wep.c " Derek Robson
` (13 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:41 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/r8180_93cx6.c | 36 +++++++++++++++++-----------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
index f35defc36fd9..c414efc0662e 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.c
+++ b/drivers/staging/rtl8192u/r8180_93cx6.c
@@ -1,22 +1,22 @@
/*
- This files contains card eeprom (93c46 or 93c56) programming routines,
- memory is addressed by 16 bits words.
-
- This is part of rtl8180 OpenSource driver.
- Copyright (C) Andrea Merello 2004 <andrea.merello@gmail.com>
- Released under the terms of GPL (General Public Licence)
-
- Parts of this driver are based on the GPL part of the
- official realtek driver.
-
- Parts of this driver are based on the rtl8180 driver skeleton
- from Patric Schenke & Andres Salomon.
-
- Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
-
- We want to thank the Authors of those projects and the Ndiswrapper
- project Authors.
-*/
+ * This files contains card eeprom (93c46 or 93c56) programming routines,
+ * memory is addressed by 16 bits words.
+ *
+ * This is part of rtl8180 OpenSource driver.
+ * Copyright (C) Andrea Merello 2004 <andrea.merello@gmail.com>
+ * Released under the terms of GPL (General Public Licence)
+ *
+ * Parts of this driver are based on the GPL part of the
+ * official realtek driver.
+ *
+ * Parts of this driver are based on the rtl8180 driver skeleton
+ * from Patric Schenke & Andres Salomon.
+ *
+ * Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
+ *
+ * We want to thank the Authors of those projects and the Ndiswrapper
+ * project Authors.
+ */
#include "r8180_93cx6.h"
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 12/25] Staging: rtl8192u: ieee80211: ieee80211_crypt_wep.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (10 preceding siblings ...)
2017-02-13 5:41 ` [PATCH v2 11/25] Staging: rtl8192u: r8180_93cx6.c " Derek Robson
@ 2017-02-13 5:42 ` Derek Robson
2017-02-13 5:42 ` [PATCH v2 13/25] Staging: rtl8192u: ieee80211: rtl819x_TSProc.c " Derek Robson
` (12 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:42 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c
index 1999bc5cbbc1..a05dae9f5918 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c
@@ -109,7 +109,8 @@ static int prism2_wep_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
/* Fluhrer, Mantin, and Shamir have reported weaknesses in the key
* scheduling algorithm of RC4. At least IVs (KeyByte + 3, 0xff, N)
- * can be used to speedup attacks, so avoid using them. */
+ * can be used to speedup attacks, so avoid using them.
+ */
if ((wep->iv & 0xff00) == 0xff00) {
u8 B = (wep->iv >> 16) & 0xff;
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 13/25] Staging: rtl8192u: ieee80211: rtl819x_TSProc.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (11 preceding siblings ...)
2017-02-13 5:42 ` [PATCH v2 12/25] Staging: rtl8192u: ieee80211: ieee80211_crypt_wep.c " Derek Robson
@ 2017-02-13 5:42 ` Derek Robson
2017-02-13 5:42 ` [PATCH v2 14/25] Staging: rtl8192u: ieee80211: ieee80211_softmac.c " Derek Robson
` (11 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:42 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
index b9ff8fec2edf..b4c13fff2c65 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
@@ -21,7 +21,7 @@ static void TsInactTimeout(unsigned long data)
* input: unsigned long data //acturally we send TX_TS_RECORD or RX_TS_RECORD to these timer
* return: NULL
* notice:
-********************************************************************************************************************/
+ ********************************************************************************************************************/
static void RxPktPendingTimeout(unsigned long data)
{
PRX_TS_RECORD pRxTs = (PRX_TS_RECORD)data;
@@ -95,7 +95,7 @@ static void RxPktPendingTimeout(unsigned long data)
* input: unsigned long data //acturally we send TX_TS_RECORD or RX_TS_RECORD to these timer
* return: NULL
* notice:
-********************************************************************************************************************/
+ ********************************************************************************************************************/
static void TsAddBaProcess(unsigned long data)
{
PTX_TS_RECORD pTxTs = (PTX_TS_RECORD)data;
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 14/25] Staging: rtl8192u: ieee80211: ieee80211_softmac.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (12 preceding siblings ...)
2017-02-13 5:42 ` [PATCH v2 13/25] Staging: rtl8192u: ieee80211: rtl819x_TSProc.c " Derek Robson
@ 2017-02-13 5:42 ` Derek Robson
2017-02-13 5:43 ` [PATCH v2 15/25] Staging: rtl8192u: ieee80211: ieee80211_module.c " Derek Robson
` (10 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:42 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
.../staging/rtl8192u/ieee80211/ieee80211_softmac.c | 71 +++++++++++-----------
1 file changed, 36 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 844e257ece7a..ab1018c0bb0b 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -203,14 +203,14 @@ static u8 MgntQuery_MgntFrameTxRate(struct ieee80211_device *ieee)
}
/*
- // Data rate of ProbeReq is already decided. Annie, 2005-03-31
- if( pMgntInfo->bScanInProgress || (pMgntInfo->bDualModeScanStep!=0) )
- {
- if(pMgntInfo->dot11CurrentWirelessMode==WIRELESS_MODE_A)
- rate = 0x0c;
- else
- rate = 0x02;
- }
+ * //Data rate of ProbeReq is already decided. Annie, 2005-03-31
+ * if( pMgntInfo->bScanInProgress || (pMgntInfo->bDualModeScanStep!=0) )
+ * {
+ * if(pMgntInfo->dot11CurrentWirelessMode==WIRELESS_MODE_A)
+ * rate = 0x0c;
+ * else
+ * rate = 0x02;
+ * }
*/
return rate;
}
@@ -270,10 +270,10 @@ inline void softmac_mgmt_xmit(struct sk_buff *skb, struct ieee80211_device *ieee
if(!ieee->check_nic_enough_desc(ieee->dev,tcb_desc->queue_index)||\
(skb_queue_len(&ieee->skb_waitQ[tcb_desc->queue_index]) != 0)||\
(ieee->queue_stop) ) {
- /* insert the skb packet to the management queue */
- /* as for the completion function, it does not need
+ /* insert the skb packet to the management queue
+ * as for the completion function, it does not need
* to check it any more.
- * */
+ */
printk("%s():insert to waitqueue!\n",__func__);
skb_queue_tail(&ieee->skb_waitQ[tcb_desc->queue_index], skb);
} else {
@@ -1455,8 +1455,8 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
(!apset && ssidset && ssidbroad && ssidmatch)
){
/* if the essid is hidden replace it with the
- * essid provided by the user.
- */
+ * essid provided by the user.
+ */
if (!ssidbroad) {
strncpy(tmp_ssid, ieee->current_network.ssid, IW_ESSID_MAX_SIZE);
tmp_ssid_len = ieee->current_network.ssid_len;
@@ -1726,11 +1726,10 @@ static short ieee80211_sta_ps_sleep(struct ieee80211_device *ieee, u32 *time_h,
int timeout = ieee->ps_timeout;
u8 dtim;
/*if(ieee->ps == IEEE80211_PS_DISABLED ||
- ieee->iw_mode != IW_MODE_INFRA ||
- ieee->state != IEEE80211_LINKED)
-
- return 0;
- */
+ * ieee->iw_mode != IW_MODE_INFRA ||
+ * ieee->state != IEEE80211_LINKED)
+ * return 0;
+ */
dtim = ieee->current_network.dtim_data;
if(!(dtim & IEEE80211_DTIM_VALID))
return 0;
@@ -2092,8 +2091,8 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
case IEEE80211_STYPE_DISASSOC:
case IEEE80211_STYPE_DEAUTH:
/* FIXME for now repeat all the association procedure
- * both for disassociation and deauthentication
- */
+ * both for disassociation and deauthentication
+ */
if ((ieee->softmac_features & IEEE_SOFTMAC_ASSOCIATE) &&
ieee->state == IEEE80211_LINKED &&
ieee->iw_mode == IW_MODE_INFRA){
@@ -2168,7 +2167,7 @@ void ieee80211_softmac_xmit(struct ieee80211_txb *txb, struct ieee80211_device *
/* insert the skb packet to the wait queue */
/* as for the completion function, it does not need
* to check it any more.
- * */
+ */
//printk("error:no descriptor left@queue_index %d\n", queue_index);
//ieee80211_stop_queue(ieee);
#ifdef USB_TX_DRIVER_AGGREGATION_ENABLE
@@ -2517,18 +2516,18 @@ static void ieee80211_associate_retry_wq(struct work_struct *work)
goto exit;
/* until we do not set the state to IEEE80211_NOLINK
- * there are no possibility to have someone else trying
- * to start an association procedure (we get here with
- * ieee->state = IEEE80211_ASSOCIATING).
- * When we set the state to IEEE80211_NOLINK it is possible
- * that the RX path run an attempt to associate, but
- * both ieee80211_softmac_check_all_nets and the
- * RX path works with ieee->lock held so there are no
- * problems. If we are still disassociated then start a scan.
- * the lock here is necessary to ensure no one try to start
- * an association procedure when we have just checked the
- * state and we are going to start the scan.
- */
+ * there are no possibility to have someone else trying
+ * to start an association procedure (we get here with
+ * ieee->state = IEEE80211_ASSOCIATING).
+ * When we set the state to IEEE80211_NOLINK it is possible
+ * that the RX path run an attempt to associate, but
+ * both ieee80211_softmac_check_all_nets and the
+ * RX path works with ieee->lock held so there are no
+ * problems. If we are still disassociated then start a scan.
+ * the lock here is necessary to ensure no one try to start
+ * an association procedure when we have just checked the
+ * state and we are going to start the scan.
+ */
ieee->state = IEEE80211_NOLINK;
ieee80211_softmac_check_all_nets(ieee);
@@ -2765,7 +2764,8 @@ void ieee80211_softmac_free(struct ieee80211_device *ieee)
static int ieee80211_wpa_enable(struct ieee80211_device *ieee, int value)
{
/* This is called when wpa_supplicant loads and closes the driver
- * interface. */
+ * interface.
+ */
printk("%s WPA\n", value ? "enabling" : "disabling");
ieee->wpa_enabled = value;
return 0;
@@ -3082,7 +3082,8 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee,
* generate new IEEE 802.11 authentication which may end up in looping
* with IEEE 802.1X. If your hardware requires a reset after WEP
* configuration (for example... Prism2), implement the reset_port in
- * the callbacks structures used to initialize the 802.11 stack. */
+ * the callbacks structures used to initialize the 802.11 stack.
+ */
if (ieee->reset_on_keychange &&
ieee->iw_mode != IW_MODE_INFRA &&
ieee->reset_port &&
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 15/25] Staging: rtl8192u: ieee80211: ieee80211_module.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (13 preceding siblings ...)
2017-02-13 5:42 ` [PATCH v2 14/25] Staging: rtl8192u: ieee80211: ieee80211_softmac.c " Derek Robson
@ 2017-02-13 5:43 ` Derek Robson
2017-02-13 5:43 ` [PATCH v2 16/25] Staging: rtl8192u: ieee80211: rtl819x_HTProc.c " Derek Robson
` (9 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:43 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
.../staging/rtl8192u/ieee80211/ieee80211_module.c | 60 +++++++++++-----------
1 file changed, 30 insertions(+), 30 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
index 30fff6c5696b..b7fcc4da9737 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_module.c
@@ -1,34 +1,34 @@
/*******************************************************************************
-
- Copyright(c) 2004 Intel Corporation. All rights reserved.
-
- Portions of this file are based on the WEP enablement code provided by the
- Host AP project hostap-drivers v0.1.3
- Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- <jkmaline@cc.hut.fi>
- Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc., 59
- Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
- The full GNU General Public License is included in this distribution in the
- file called LICENSE.
-
- Contact Information:
- James P. Ketrenos <ipw2100-admin@linux.intel.com>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
+ *
+ * Copyright(c) 2004 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are based on the WEP enablement code provided by the
+ * Host AP project hostap-drivers v0.1.3
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *******************************************************************************/
#include <linux/compiler.h>
/* #include <linux/config.h> */
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 16/25] Staging: rtl8192u: ieee80211: rtl819x_HTProc.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (14 preceding siblings ...)
2017-02-13 5:43 ` [PATCH v2 15/25] Staging: rtl8192u: ieee80211: ieee80211_module.c " Derek Robson
@ 2017-02-13 5:43 ` Derek Robson
2017-02-13 5:43 ` [PATCH v2 17/25] Staging: rtl8192u: ieee80211: rtl819x_BAProc.c " Derek Robson
` (8 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:43 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
.../staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 164 ++++++++++-----------
1 file changed, 82 insertions(+), 82 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index c27397b14adb..9e8ed8c2e21e 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -217,8 +217,8 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
}
/*
-* Return: true if station in half n mode and AP supports 40 bw
-*/
+ * Return: true if station in half n mode and AP supports 40 bw
+ */
static bool IsHTHalfNmode40Bandwidth(struct ieee80211_device *ieee)
{
bool retValue = false;
@@ -412,7 +412,7 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
* u8 * PeerMacAddr
* output: none
* return: return 1 if driver should declare MCS13 only(otherwise return 0)
- * *****************************************************************************************************************/
+ ******************************************************************************************************************/
static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
{
return 0;
@@ -420,17 +420,17 @@ static u8 HTIOTActIsDisableMCS14(struct ieee80211_device *ieee, u8 *PeerMacAddr)
/**
-* Function: HTIOTActIsDisableMCS15
-*
-* Overview: Check whether driver should declare capability of receiving MCS15
-*
-* Input:
-* PADAPTER Adapter,
-*
-* Output: None
-* Return: true if driver should disable MCS15
-* 2008.04.15 Emily
-*/
+ * Function: HTIOTActIsDisableMCS15
+ *
+ * Overview: Check whether driver should declare capability of receiving MCS15
+ *
+ * Input:
+ * PADAPTER Adapter,
+ *
+ * Output: None
+ * Return: true if driver should disable MCS15
+ * 2008.04.15 Emily
+ */
static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
{
bool retValue = false;
@@ -457,17 +457,17 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
}
/**
-* Function: HTIOTActIsDisableMCSTwoSpatialStream
-*
-* Overview: Check whether driver should declare capability of receiving All 2 ss packets
-*
-* Input:
-* PADAPTER Adapter,
-*
-* Output: None
-* Return: true if driver should disable all two spatial stream packet
-* 2008.04.21 Emily
-*/
+ * Function: HTIOTActIsDisableMCSTwoSpatialStream
+ *
+ * Overview: Check whether driver should declare capability of receiving All 2 ss packets
+ *
+ * Input:
+ * PADAPTER Adapter,
+ *
+ * Output: None
+ * Return: true if driver should disable all two spatial stream packet
+ * 2008.04.21 Emily
+ */
static bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
{
@@ -483,7 +483,7 @@ static bool HTIOTActIsDisableMCSTwoSpatialStream(struct ieee80211_device *ieee,
* u8* PeerMacAddr
* output: none
* return: return 1 if driver should disable EDCA turbo mode(otherwise return 0)
- * *****************************************************************************************************************/
+ ******************************************************************************************************************/
static u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device *ieee,
u8 *PeerMacAddr)
{ /* default enable EDCA Turbo mode. */
@@ -495,7 +495,7 @@ static u8 HTIOTActIsDisableEDCATurbo(struct ieee80211_device *ieee,
* input: struct ieee80211_network *network //current network we live
* output: none
* return: return 1 if true
- * *****************************************************************************************************************/
+ *****************************************************************************************************************/
static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
{
u8 retValue = 0;
@@ -542,7 +542,7 @@ void HTResetIOTSetting(
* output: none
* return: none
* notice: posHTCap can't be null and should be initialized before.
- * *****************************************************************************************************************/
+ ******************************************************************************************************************/
void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u8 *len, u8 IsEncrypt)
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
@@ -660,7 +660,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
* output: none
* return: none
* notice: posHTCap can't be null and be initialized before. only AP and IBSS sta should do this
- * *****************************************************************************************************************/
+ ******************************************************************************************************************/
void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *len, u8 IsEncrypt)
{
PRT_HIGH_THROUGHPUT pHT = ieee->pHTInfo;
@@ -707,23 +707,23 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
}
/*
- * According to experiment, Realtek AP to STA (based on rtl8190) may achieve best performance
- * if both STA and AP set limitation of aggregation size to 32K, that is, set AMPDU density to 2
- * (Ref: IEEE 11n specification). However, if Realtek STA associates to other AP, STA should set
- * limitation of aggregation size to 8K, otherwise, performance of traffic stream from STA to AP
- * will be much less than the traffic stream from AP to STA if both of the stream runs concurrently
- * at the same time.
- *
- * Frame Format
- * Element ID Length OUI Type1 Reserved
- * 1 byte 1 byte 3 bytes 1 byte 1 byte
- *
- * OUI = 0x00, 0xe0, 0x4c,
- * Type = 0x02
- * Reserved = 0x00
- *
- * 2007.8.21 by Emily
-*/
+ * According to experiment, Realtek AP to STA (based on rtl8190) may achieve best performance
+ * if both STA and AP set limitation of aggregation size to 32K, that is, set AMPDU density to 2
+ * (Ref: IEEE 11n specification). However, if Realtek STA associates to other AP, STA should set
+ * limitation of aggregation size to 8K, otherwise, performance of traffic stream from STA to AP
+ * will be much less than the traffic stream from AP to STA if both of the stream runs concurrently
+ * at the same time.
+ *
+ * Frame Format
+ * Element ID Length OUI Type1 Reserved
+ * 1 byte 1 byte 3 bytes 1 byte 1 byte
+ *
+ * OUI = 0x00, 0xe0, 0x4c,
+ * Type = 0x02
+ * Reserved = 0x00
+ *
+ * 2007.8.21 by Emily
+ */
/********************************************************************************************************************
*function: Construct Information Element in Beacon... in RT2RT condition
* input: struct ieee80211_device* ieee
@@ -732,7 +732,7 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
* output: none
* return: none
* notice:
- * *****************************************************************************************************************/
+ ******************************************************************************************************************/
void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg, u8 *len)
{
if (posRT2RTAgg == NULL) {
@@ -745,7 +745,7 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
*posRT2RTAgg++ = 0x4c;
*posRT2RTAgg++ = 0x02;
*posRT2RTAgg++ = 0x01;
- *posRT2RTAgg = 0x10;//*posRT2RTAgg = 0x02;
+ *posRT2RTAgg = 0x10; // *posRT2RTAgg = 0x02;
if (ieee->bSupportRemoteWakeUp) {
*posRT2RTAgg |= 0x08;//RT_HT_CAP_USE_WOW;
@@ -756,16 +756,16 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
#ifdef TODO
#if (HAL_CODE_BASE == RTL8192 && DEV_BUS_TYPE == USB_INTERFACE)
/*
- //Emily. If it is required to Ask Realtek AP to send AMPDU during AES mode, enable this
- section of code.
- if(IS_UNDER_11N_AES_MODE(Adapter))
- {
- posRT2RTAgg->Octet[5] |=RT_HT_CAP_USE_AMPDU;
- }else
- {
- posRT2RTAgg->Octet[5] &= 0xfb;
- }
- */
+ * Emily. If it is required to Ask Realtek AP to send AMPDU during AES mode, enable this
+ * section of code.
+ * if(IS_UNDER_11N_AES_MODE(Adapter))
+ * {
+ * posRT2RTAgg->Octet[5] |=RT_HT_CAP_USE_AMPDU;
+ * } else
+ * {
+ * posRT2RTAgg->Octet[5] &= 0xfb;
+ * }
+ */
#else
// Do Nothing
@@ -786,7 +786,7 @@ void HTConstructRT2RTAggElement(struct ieee80211_device *ieee, u8 *posRT2RTAgg,
* u8* pOperateMCS //A pointer to MCS rate bitmap
* return: always we return true
* notice:
- * *****************************************************************************************************************/
+ ******************************************************************************************************************/
static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
{
u8 i;
@@ -832,16 +832,16 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
}
/*
-* Description:
-* This function will get the highest speed rate in input MCS set.
-*
-* /param Adapter Pionter to Adapter entity
-* pMCSRateSet Pointer to MCS rate bitmap
-* pMCSFilter Pointer to MCS rate filter
-*
-* /return Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter.
-*
-*/
+ * Description:
+ * This function will get the highest speed rate in input MCS set.
+ *
+ * /param Adapter Pionter to Adapter entity
+ * pMCSRateSet Pointer to MCS rate bitmap
+ * pMCSFilter Pointer to MCS rate filter
+ *
+ * /return Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter.
+ *
+ */
/********************************************************************************************************************
*function: This function will get the highest speed rate in input MCS set.
* input: struct ieee80211_device* ieee
@@ -849,7 +849,7 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
* u8* pMCSFilter //Pointer to MCS rate filter
* return: Highest MCS rate included in pMCSRateSet and filtered by pMCSFilter
* notice:
- * *****************************************************************************************************************/
+ ******************************************************************************************************************/
u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSFilter)
{
u8 i, j;
@@ -894,14 +894,14 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
/*
-**
-**1.Filter our operation rate set with AP's rate set
-**2.shall reference channel bandwidth, STBC, Antenna number
-**3.generate rate adative table for firmware
-**David 20060906
-**
-** \pHTSupportedCap: the connected STA's supported rate Capability element
-*/
+ *
+ *1.Filter our operation rate set with AP's rate set
+ *2.shall reference channel bandwidth, STBC, Antenna number
+ *3.generate rate adative table for firmware
+ *David 20060906
+ *
+ * \pHTSupportedCap: the connected STA's supported rate Capability element
+ */
static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
u8 *pOperateMCS)
{
@@ -1117,7 +1117,7 @@ void HTSetConnectBwModeCallback(struct ieee80211_device *ieee);
* output: none
* return: none
* notice: This function is called when * (1) MPInitialization Phase * (2) Receiving of Deauthentication from AP
-********************************************************************************************************************/
+ ********************************************************************************************************************/
// TODO: Should this funciton be called when receiving of Disassociation?
void HTInitializeHTInfo(struct ieee80211_device *ieee)
{
@@ -1186,7 +1186,7 @@ void HTInitializeHTInfo(struct ieee80211_device *ieee)
* output: none
* return: none
* notice: This function is called when initialize network structure
-********************************************************************************************************************/
+ ********************************************************************************************************************/
void HTInitializeBssDesc(PBSS_HT pBssHT)
{
@@ -1208,7 +1208,7 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
* output: none
* return: none
* notice: This function should ONLY be called before association
-********************************************************************************************************************/
+ ********************************************************************************************************************/
void HTResetSelfAndSavePeerSetting(struct ieee80211_device *ieee, struct ieee80211_network *pNetwork)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
@@ -1320,7 +1320,7 @@ EXPORT_SYMBOL(HTUpdateSelfAndPeerSetting);
* output: none
* return: return true if HT control field exists(false otherwise)
* notice:
-********************************************************************************************************************/
+ ********************************************************************************************************************/
u8 HTCCheck(struct ieee80211_device *ieee, u8 *pFrame)
{
if (ieee->pHTInfo->bCurrentHTSupport)
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 17/25] Staging: rtl8192u: ieee80211: rtl819x_BAProc.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (15 preceding siblings ...)
2017-02-13 5:43 ` [PATCH v2 16/25] Staging: rtl8192u: ieee80211: rtl819x_HTProc.c " Derek Robson
@ 2017-02-13 5:43 ` Derek Robson
2017-02-13 5:44 ` [PATCH v2 18/25] Staging: rtl8192u: ieee80211: rtl819x_HT.h " Derek Robson
` (7 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:43 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
.../staging/rtl8192u/ieee80211/rtl819x_BAProc.c | 28 +++++++++++-----------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c
index 98fbb6ef484d..e8c4b2a05f49 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c
@@ -14,7 +14,7 @@
* input: PBA_RECORD pBA //BA entry to be enabled
* u16 Time //indicate time delay.
* output: none
-********************************************************************************************************************/
+ ********************************************************************************************************************/
static void ActivateBAEntry(struct ieee80211_device *ieee, PBA_RECORD pBA, u16 Time)
{
pBA->bValid = true;
@@ -26,7 +26,7 @@ static void ActivateBAEntry(struct ieee80211_device *ieee, PBA_RECORD pBA, u16 T
*function: deactivate BA entry, including its timer.
* input: PBA_RECORD pBA //BA entry to be disabled
* output: none
-********************************************************************************************************************/
+ ********************************************************************************************************************/
static void DeActivateBAEntry(struct ieee80211_device *ieee, PBA_RECORD pBA)
{
pBA->bValid = false;
@@ -38,7 +38,7 @@ static void DeActivateBAEntry(struct ieee80211_device *ieee, PBA_RECORD pBA)
* PTX_TS_RECORD pTxTs //Tx Ts which is to deactivate BA entry.
* output: none
* notice: As PTX_TS_RECORD structure will be defined in QOS, so wait to be merged. //FIXME
-********************************************************************************************************************/
+ ********************************************************************************************************************/
static u8 TxTsDeleteBA(struct ieee80211_device *ieee, PTX_TS_RECORD pTxTs)
{
PBA_RECORD pAdmittedBa = &pTxTs->TxAdmittedBARecord; //These two BA entries must exist in TS structure
@@ -68,7 +68,7 @@ static u8 TxTsDeleteBA(struct ieee80211_device *ieee, PTX_TS_RECORD pTxTs)
* PRX_TS_RECORD pRxTs //Rx Ts which is to deactivate BA entry.
* output: none
* notice: As PRX_TS_RECORD structure will be defined in QOS, so wait to be merged. //FIXME, same with above
-********************************************************************************************************************/
+ ********************************************************************************************************************/
static u8 RxTsDeleteBA(struct ieee80211_device *ieee, PRX_TS_RECORD pRxTs)
{
PBA_RECORD pBa = &pRxTs->RxAdmittedBARecord;
@@ -88,7 +88,7 @@ static u8 RxTsDeleteBA(struct ieee80211_device *ieee, PRX_TS_RECORD pRxTs)
* input:
* PBA_RECORD pBA //entry to be reset
* output: none
-********************************************************************************************************************/
+ ********************************************************************************************************************/
void ResetBaEntry(PBA_RECORD pBA)
{
pBA->bValid = false;
@@ -106,7 +106,7 @@ void ResetBaEntry(PBA_RECORD pBA)
* u8 type //indicate whether it's RSP(ACT_ADDBARSP) ow REQ(ACT_ADDBAREQ)
* output: none
* return: sk_buff* skb //return constructed skb to xmit
-*******************************************************************************************************************************/
+ *******************************************************************************************************************************/
static struct sk_buff *ieee80211_ADDBA(struct ieee80211_device *ieee, u8 *Dst, PBA_RECORD pBA, u16 StatusCode, u8 type)
{
struct sk_buff *skb = NULL;
@@ -184,7 +184,7 @@ static struct sk_buff *ieee80211_ADDBA(struct ieee80211_device *ieee, u8 *Dst, P
* u16 ReasonCode //status code.
* output: none
* return: sk_buff* skb //return constructed skb to xmit
-********************************************************************************************************************/
+ ********************************************************************************************************************/
static struct sk_buff *ieee80211_DELBA(
struct ieee80211_device *ieee,
u8 *dst,
@@ -250,7 +250,7 @@ static struct sk_buff *ieee80211_DELBA(
* PBA_RECORD pBA //BA_RECORD entry which stores the necessary information for BA
* output: none
* notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
-********************************************************************************************************************/
+ ********************************************************************************************************************/
static void ieee80211_send_ADDBAReq(struct ieee80211_device *ieee,
u8 *dst, PBA_RECORD pBA)
{
@@ -278,7 +278,7 @@ static void ieee80211_send_ADDBAReq(struct ieee80211_device *ieee,
* u16 StatusCode //RSP StatusCode
* output: none
* notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
-********************************************************************************************************************/
+ ********************************************************************************************************************/
static void ieee80211_send_ADDBARsp(struct ieee80211_device *ieee, u8 *dst,
PBA_RECORD pBA, u16 StatusCode)
{
@@ -305,7 +305,7 @@ static void ieee80211_send_ADDBARsp(struct ieee80211_device *ieee, u8 *dst,
* u16 ReasonCode //DEL ReasonCode
* output: none
* notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
-********************************************************************************************************************/
+ ********************************************************************************************************************/
static void ieee80211_send_DELBA(struct ieee80211_device *ieee, u8 *dst,
PBA_RECORD pBA, TR_SELECT TxRxSelect,
@@ -330,7 +330,7 @@ static void ieee80211_send_DELBA(struct ieee80211_device *ieee, u8 *dst,
* input: struct sk_buff * skb //incoming ADDBAReq skb.
* return: 0(pass), other(fail)
* notice: As this function need support of QOS, I comment some code out. And when qos is ready, this code need to be support.
-********************************************************************************************************************/
+ ********************************************************************************************************************/
int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb)
{
struct rtl_80211_hdr_3addr *req = NULL;
@@ -432,7 +432,7 @@ int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb)
* input: struct sk_buff * skb //incoming ADDBAReq skb.
* return: 0(pass), other(fail)
* notice: As this function need support of QOS, I comment some code out. And when qos is ready, this code need to be support.
-********************************************************************************************************************/
+ ********************************************************************************************************************/
int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
{
struct rtl_80211_hdr_3addr *rsp = NULL;
@@ -566,7 +566,7 @@ int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
* input: struct sk_buff * skb //incoming ADDBAReq skb.
* return: 0(pass), other(fail)
* notice: As this function need support of QOS, I comment some code out. And when qos is ready, this code need to be support.
-********************************************************************************************************************/
+ ********************************************************************************************************************/
int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb)
{
struct rtl_80211_hdr_3addr *delba = NULL;
@@ -703,7 +703,7 @@ TsInitDelBA( struct ieee80211_device *ieee, PTS_COMMON_INFO pTsCommonInfo, TR_SE
* input: unsigned long data //acturally we send TX_TS_RECORD or RX_TS_RECORD to these timer
* return: NULL
* notice:
-********************************************************************************************************************/
+ ********************************************************************************************************************/
void BaSetupTimeOut(unsigned long data)
{
PTX_TS_RECORD pTxTs = (PTX_TS_RECORD)data;
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 18/25] Staging: rtl8192u: ieee80211: rtl819x_HT.h - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (16 preceding siblings ...)
2017-02-13 5:43 ` [PATCH v2 17/25] Staging: rtl8192u: ieee80211: rtl819x_BAProc.c " Derek Robson
@ 2017-02-13 5:44 ` Derek Robson
2017-02-13 5:44 ` [PATCH v2 19/25] Staging: rtl8192u: ieee80211: rtl819x_BA.h " Derek Robson
` (6 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:44 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h | 69 +++++++++++++------------
1 file changed, 35 insertions(+), 34 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index c3aabbaac7ae..d270c8ac807c 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -86,38 +86,38 @@ typedef enum _CHNLOP{
((_pHTInfo)->ChnlOp > CHNLOP_NONE) ? TRUE : FALSE
/*
-typedef union _HT_CAPABILITY{
- u16 ShortData;
- u8 CharData[2];
- struct
- {
- u16 AdvCoding:1;
- u16 ChlWidth:1;
- u16 MimoPwrSave:2;
- u16 GreenField:1;
- u16 ShortGI20Mhz:1;
- u16 ShortGI40Mhz:1;
- u16 STBC:1;
- u16 BeamForm:1;
- u16 DelayBA:1;
- u16 MaxAMSDUSize:1;
- u16 DssCCk:1;
- u16 PSMP:1;
- u16 Rsvd:3;
- }Field;
-}HT_CAPABILITY, *PHT_CAPABILITY;
-
-typedef union _HT_CAPABILITY_MACPARA{
- u8 ShortData;
- u8 CharData[1];
- struct
- {
- u8 MaxRxAMPDU:2;
- u8 MPDUDensity:2;
- u8 Rsvd:4;
- }Field;
-}HT_CAPABILITY_MACPARA, *PHT_CAPABILITY_MACPARA;
-*/
+ * typedef union _HT_CAPABILITY{
+ * u16 ShortData;
+ * u8 CharData[2];
+ * struct
+ * {
+ * u16 AdvCoding:1;
+ * u16 ChlWidth:1;
+ * u16 MimoPwrSave:2;
+ * u16 GreenField:1;
+ * u16 ShortGI20Mhz:1;
+ * u16 ShortGI40Mhz:1;
+ * u16 STBC:1;
+ * u16 BeamForm:1;
+ * u16 DelayBA:1;
+ * u16 MaxAMSDUSize:1;
+ * u16 DssCCk:1;
+ * u16 PSMP:1;
+ * u16 Rsvd:3;
+ * }Field;
+ * }HT_CAPABILITY, *PHT_CAPABILITY;
+ *
+ * typedef union _HT_CAPABILITY_MACPARA{
+ * u8 ShortData;
+ * u8 CharData[1];
+ * struct
+ * {
+ * u8 MaxRxAMPDU:2;
+ * u8 MPDUDensity:2;
+ * u8 Rsvd:4;
+ * }Field;
+ * }HT_CAPABILITY_MACPARA, *PHT_CAPABILITY_MACPARA;
+ */
typedef enum _HT_ACTION{
ACT_RECOMMAND_WIDTH = 0,
@@ -421,8 +421,9 @@ extern u8 MCS_FILTER_ALL[16];
extern u8 MCS_FILTER_1SS[16];
/* 2007/07/11 MH Modify the macro. Becaus STA may link with a N-AP. If we set
- STA in A/B/G mode and AP is still in N mode. The macro will be wrong. We have
- to add a macro to judge wireless mode. */
+ * STA in A/B/G mode and AP is still in N mode. The macro will be wrong. We have
+ * to add a macro to judge wireless mode.
+ */
#define PICK_RATE(_nLegacyRate, _nMcsRate) \
(_nMcsRate==0)?(_nLegacyRate&0x7f):(_nMcsRate)
/* 2007/07/12 MH We only define legacy and HT wireless mode now. */
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 19/25] Staging: rtl8192u: ieee80211: rtl819x_BA.h - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (17 preceding siblings ...)
2017-02-13 5:44 ` [PATCH v2 18/25] Staging: rtl8192u: ieee80211: rtl819x_HT.h " Derek Robson
@ 2017-02-13 5:44 ` Derek Robson
2017-02-13 5:44 ` [PATCH v2 20/25] Staging: rtl8192u: ieee80211: ieee80211_wx.c " Derek Robson
` (5 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:44 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h
index 2c398ca9a8ac..e61f608718b1 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_BA.h
@@ -19,12 +19,12 @@
#define DELBA_REASON_UNKNOWN_BA 38
#define DELBA_REASON_TIMEOUT 39
/* whether need define BA Action frames here?
-struct ieee80211_ADDBA_Req{
- struct ieee80211_header_data header;
- u8 category;
- u8
-} __attribute__ ((packed));
-*/
+ *struct ieee80211_ADDBA_Req{
+ * struct ieee80211_header_data header;
+ * u8 category;
+ * u8
+ *} __attribute__ ((packed));
+ */
//Is this need?I put here just to make it easier to define structure BA_RECORD //WB
typedef union _SEQUENCE_CONTROL{
u16 ShortData;
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 20/25] Staging: rtl8192u: ieee80211: ieee80211_wx.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (18 preceding siblings ...)
2017-02-13 5:44 ` [PATCH v2 19/25] Staging: rtl8192u: ieee80211: rtl819x_BA.h " Derek Robson
@ 2017-02-13 5:44 ` Derek Robson
2017-02-13 5:45 ` [PATCH v2 21/25] Staging: rtl8192u: ieee80211: ieee80211_tx.c " Derek Robson
` (4 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:44 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c | 87 ++++++++++++-----------
1 file changed, 47 insertions(+), 40 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
index 563d7fed6e1c..0d24158e038a 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
@@ -1,34 +1,34 @@
/******************************************************************************
-
- Copyright(c) 2004 Intel Corporation. All rights reserved.
-
- Portions of this file are based on the WEP enablement code provided by the
- Host AP project hostap-drivers v0.1.3
- Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
- <jkmaline@cc.hut.fi>
- Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc., 59
- Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
- The full GNU General Public License is included in this distribution in the
- file called LICENSE.
-
- Contact Information:
- James P. Ketrenos <ipw2100-admin@linux.intel.com>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-******************************************************************************/
+ *
+ * Copyright(c) 2004 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are based on the WEP enablement code provided by the
+ * Host AP project hostap-drivers v0.1.3
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ ******************************************************************************/
#include <linux/wireless.h>
#include <linux/kmod.h>
#include <linux/slab.h>
@@ -108,7 +108,8 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
/* Add frequency/channel */
iwe.cmd = SIOCGIWFREQ;
/* iwe.u.freq.m = ieee80211_frequency(network->channel, network->mode);
- iwe.u.freq.e = 3; */
+ * iwe.u.freq.e = 3;
+ */
iwe.u.freq.m = network->channel;
iwe.u.freq.e = 0;
iwe.u.freq.i = 0;
@@ -227,7 +228,8 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
/* Add EXTRA: Age to display seconds since last beacon/probe response
- * for given network. */
+ * for given network.
+ */
iwe.cmd = IWEVCUSTOM;
p = custom;
p += snprintf(p, MAX_CUSTOM_LEN - (p - custom),
@@ -325,7 +327,8 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
IEEE80211_DEBUG_WX("Disabling encryption.\n");
/* Check all the keys to see if any are still configured,
- * and if no key index was provided, de-init them all */
+ * and if no key index was provided, de-init them all
+ */
for (i = 0; i < WEP_KEYS; i++) {
if (ieee->crypt[i] != NULL) {
if (key_provided)
@@ -352,7 +355,8 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
if (*crypt != NULL && (*crypt)->ops != NULL &&
strcmp((*crypt)->ops->name, "WEP") != 0) {
/* changing to use WEP; deinit previously used algorithm
- * on this key */
+ * on this key
+ */
ieee80211_crypt_delayed_deinit(ieee, crypt);
}
@@ -399,7 +403,8 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
(*crypt)->priv);
sec.flags |= (1 << key);
/* This ensures a key will be activated if no key is
- * explicitely set */
+ * explicitely set
+ */
if (key == sec.active_key)
sec.flags |= SEC_ACTIVE_KEY;
ieee->tx_keyidx = key;
@@ -440,7 +445,8 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
"OPEN" : "SHARED KEY");
/* For now we just support WEP, so only set that security level...
- * TODO: When WPA is added this is one place that needs to change */
+ * TODO: When WPA is added this is one place that needs to change
+ */
sec.flags |= SEC_LEVEL;
sec.level = SEC_LEVEL_1; /* 40 and 104 bit WEP */
@@ -451,7 +457,8 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
* generate new IEEE 802.11 authentication which may end up in looping
* with IEEE 802.1X. If your hardware requires a reset after WEP
* configuration (for example... Prism2), implement the reset_port in
- * the callbacks structures used to initialize the 802.11 stack. */
+ * the callbacks structures used to initialize the 802.11 stack.
+ */
if (ieee->reset_on_keychange &&
ieee->iw_mode != IW_MODE_INFRA &&
ieee->reset_port && ieee->reset_port(dev)) {
@@ -761,9 +768,9 @@ int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
case IW_AUTH_CIPHER_GROUP:
case IW_AUTH_KEY_MGMT:
/*
- * * Host AP driver does not use these parameters and allows
- * * wpa_supplicant to control them internally.
- * */
+ * Host AP driver does not use these parameters and allows
+ * wpa_supplicant to control them internally.
+ */
break;
case IW_AUTH_TKIP_COUNTERMEASURES:
ieee->tkip_countermeasures = data->value;
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 21/25] Staging: rtl8192u: ieee80211: ieee80211_tx.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (19 preceding siblings ...)
2017-02-13 5:44 ` [PATCH v2 20/25] Staging: rtl8192u: ieee80211: ieee80211_wx.c " Derek Robson
@ 2017-02-13 5:45 ` Derek Robson
2017-02-13 5:45 ` [PATCH v2 22/25] Staging: rtl8192u: ieee80211: ieee80211_rx.c " Derek Robson
` (3 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:45 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c | 290 +++++++++++-----------
1 file changed, 150 insertions(+), 140 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
index 2b0e1b4b2345..3a0a4ce80211 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
@@ -1,35 +1,34 @@
/******************************************************************************
-
- Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc., 59
- Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
- The full GNU General Public License is included in this distribution in the
- file called LICENSE.
-
- Contact Information:
- James P. Ketrenos <ipw2100-admin@linux.intel.com>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-******************************************************************************
-
- Few modifications for Realtek's Wi-Fi drivers by
- Andrea Merello <andrea.merello@gmail.com>
-
- A special thanks goes to Realtek for their support !
-
-******************************************************************************/
+ *
+ * Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * James P. Ketrenos <ipw2100-admin@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *
+ * Few modifications for Realtek's Wi-Fi drivers by
+ * Andrea Merello <andrea.merello@gmail.com>
+ *
+ * A special thanks goes to Realtek for their support !
+ *
+ ******************************************************************************/
#include <linux/compiler.h>
#include <linux/errno.h>
@@ -55,101 +54,101 @@
/*
-
-
-802.11 Data Frame
-
-
-802.11 frame_contorl for data frames - 2 bytes
- ,-----------------------------------------------------------------------------------------.
-bits | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e |
- |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
-val | 0 | 0 | 0 | 1 | x | 0 | 0 | 0 | 1 | 0 | x | x | x | x | x |
- |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
-desc | ^-ver-^ | ^type-^ | ^-----subtype-----^ | to |from |more |retry| pwr |more |wep |
- | | | x=0 data,x=1 data+ack | DS | DS |frag | | mgm |data | |
- '-----------------------------------------------------------------------------------------'
- /\
- |
-802.11 Data Frame |
- ,--------- 'ctrl' expands to >-----------'
- |
- ,--'---,-------------------------------------------------------------.
-Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
- |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | Frame | fcs |
- | | tion | (BSSID) | | | ence | data | |
- `--------------------------------------------------| |------'
-Total: 28 non-data bytes `----.----'
- |
- .- 'Frame data' expands to <---------------------------'
- |
- V
- ,---------------------------------------------------.
-Bytes | 1 | 1 | 1 | 3 | 2 | 0-2304 |
- |------|------|---------|----------|------|---------|
-Desc. | SNAP | SNAP | Control |Eth Tunnel| Type | IP |
- | DSAP | SSAP | | | | Packet |
- | 0xAA | 0xAA |0x03 (UI)|0x00-00-F8| | |
- `-----------------------------------------| |
-Total: 8 non-data bytes `----.----'
- |
- .- 'IP Packet' expands, if WEP enabled, to <--'
- |
- V
- ,-----------------------.
-Bytes | 4 | 0-2296 | 4 |
- |-----|-----------|-----|
-Desc. | IV | Encrypted | ICV |
- | | IP Packet | |
- `-----------------------'
-Total: 8 non-data bytes
-
-
-802.3 Ethernet Data Frame
-
- ,-----------------------------------------.
-Bytes | 6 | 6 | 2 | Variable | 4 |
- |-------|-------|------|-----------|------|
-Desc. | Dest. | Source| Type | IP Packet | fcs |
- | MAC | MAC | | | |
- `-----------------------------------------'
-Total: 18 non-data bytes
-
-In the event that fragmentation is required, the incoming payload is split into
-N parts of size ieee->fts. The first fragment contains the SNAP header and the
-remaining packets are just data.
-
-If encryption is enabled, each fragment payload size is reduced by enough space
-to add the prefix and postfix (IV and ICV totalling 8 bytes in the case of WEP)
-So if you have 1500 bytes of payload with ieee->fts set to 500 without
-encryption it will take 3 frames. With WEP it will take 4 frames as the
-payload of each frame is reduced to 492 bytes.
-
-* SKB visualization
-*
-* ,- skb->data
-* |
-* | ETHERNET HEADER ,-<-- PAYLOAD
-* | | 14 bytes from skb->data
-* | 2 bytes for Type --> ,T. | (sizeof ethhdr)
-* | | | |
-* |,-Dest.--. ,--Src.---. | | |
-* | 6 bytes| | 6 bytes | | | |
-* v | | | | | |
-* 0 | v 1 | v | v 2
-* 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
-* ^ | ^ | ^ |
-* | | | | | |
-* | | | | `T' <---- 2 bytes for Type
-* | | | |
-* | | '---SNAP--' <-------- 6 bytes for SNAP
-* | |
-* `-IV--' <-------------------- 4 bytes for IV (WEP)
-*
-* SNAP HEADER
-*
-*/
+ *
+ *
+ * 802.11 Data Frame
+ *
+ *
+ * 802.11 frame_contorl for data frames - 2 bytes
+ * ,-----------------------------------------------------------------------------------------.
+ * bits | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e |
+ * |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
+ * val | 0 | 0 | 0 | 1 | x | 0 | 0 | 0 | 1 | 0 | x | x | x | x | x |
+ * |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
+ * desc | ^-ver-^ | ^type-^ | ^-----subtype-----^ | to |from |more |retry| pwr |more |wep |
+ * | | | x=0 data,x=1 data+ack | DS | DS |frag | | mgm |data | |
+ * '-----------------------------------------------------------------------------------------'
+ * /\
+ * |
+ * 802.11 Data Frame |
+ * ,--------- 'ctrl' expands to >-----------'
+ * |
+ * ,--'---,-------------------------------------------------------------.
+ * Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
+ * |------|------|---------|---------|---------|------|---------|------|
+ * Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | Frame | fcs |
+ * | | tion | (BSSID) | | | ence | data | |
+ * `--------------------------------------------------| |------'
+ * Total: 28 non-data bytes `----.----'
+ * |
+ * .- 'Frame data' expands to <---------------------------'
+ * |
+ * V
+ * ,---------------------------------------------------.
+ * Bytes | 1 | 1 | 1 | 3 | 2 | 0-2304 |
+ * |------|------|---------|----------|------|---------|
+ * Desc. | SNAP | SNAP | Control |Eth Tunnel| Type | IP |
+ * | DSAP | SSAP | | | | Packet |
+ * | 0xAA | 0xAA |0x03 (UI)|0x00-00-F8| | |
+ * `-----------------------------------------| |
+ * Total: 8 non-data bytes `----.----'
+ * |
+ * .- 'IP Packet' expands, if WEP enabled, to <--'
+ * |
+ * V
+ * ,-----------------------.
+ * Bytes | 4 | 0-2296 | 4 |
+ * |-----|-----------|-----|
+ * Desc. | IV | Encrypted | ICV |
+ * | | IP Packet | |
+ * `-----------------------'
+ * Total: 8 non-data bytes
+ *
+ *
+ * 802.3 Ethernet Data Frame
+ *
+ * ,-----------------------------------------.
+ * Bytes | 6 | 6 | 2 | Variable | 4 |
+ * |-------|-------|------|-----------|------|
+ * Desc. | Dest. | Source| Type | IP Packet | fcs |
+ * | MAC | MAC | | | |
+ * `-----------------------------------------'
+ * Total: 18 non-data bytes
+ *
+ * In the event that fragmentation is required, the incoming payload is split into
+ * N parts of size ieee->fts. The first fragment contains the SNAP header and the
+ * remaining packets are just data.
+ *
+ * If encryption is enabled, each fragment payload size is reduced by enough space
+ * to add the prefix and postfix (IV and ICV totalling 8 bytes in the case of WEP)
+ * So if you have 1500 bytes of payload with ieee->fts set to 500 without
+ * encryption it will take 3 frames. With WEP it will take 4 frames as the
+ * payload of each frame is reduced to 492 bytes.
+ *
+ * SKB visualization
+ *
+ * ,- skb->data
+ * |
+ * | ETHERNET HEADER ,-<-- PAYLOAD
+ * | | 14 bytes from skb->data
+ * | 2 bytes for Type --> ,T. | (sizeof ethhdr)
+ * | | | |
+ * |,-Dest.--. ,--Src.---. | | |
+ * | 6 bytes| | 6 bytes | | | |
+ * v | | | | | |
+ * 0 | v 1 | v | v 2
+ * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
+ * ^ | ^ | ^ |
+ * | | | | | |
+ * | | | | `T' <---- 2 bytes for Type
+ * | | | |
+ * | | '---SNAP--' <-------- 6 bytes for SNAP
+ * | |
+ * `-IV--' <-------------------- 4 bytes for IV (WEP)
+ *
+ * SNAP HEADER
+ *
+ */
static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 };
static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 };
@@ -205,11 +204,13 @@ int ieee80211_encrypt_fragment(
}
/* To encrypt, frame format is:
- * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes) */
+ * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes)
+ */
// PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU encryption.
/* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so
- * call both MSDU and MPDU encryption functions from here. */
+ * call both MSDU and MPDU encryption functions from here.
+ */
atomic_inc(&crypt->refcnt);
res = 0;
if (crypt->ops->encrypt_msdu)
@@ -620,7 +621,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
spin_lock_irqsave(&ieee->lock, flags);
/* If there is no driver handler to take the TXB, dont' bother
- * creating it... */
+ * creating it...
+ */
if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE))||
((!ieee->softmac_data_hard_start_xmit && (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) {
printk(KERN_WARNING "%s: No xmit handler.\n",
@@ -683,13 +685,15 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
if (ieee->iw_mode == IW_MODE_INFRA) {
fc |= IEEE80211_FCTL_TODS;
/* To DS: Addr1 = BSSID, Addr2 = SA,
- Addr3 = DA */
+ * Addr3 = DA
+ */
memcpy(&header.addr1, ieee->current_network.bssid, ETH_ALEN);
memcpy(&header.addr2, &src, ETH_ALEN);
memcpy(&header.addr3, &dest, ETH_ALEN);
} else if (ieee->iw_mode == IW_MODE_ADHOC) {
/* not From/To DS: Addr1 = DA, Addr2 = SA,
- Addr3 = BSSID */
+ * Addr3 = BSSID
+ */
memcpy(&header.addr1, dest, ETH_ALEN);
memcpy(&header.addr2, src, ETH_ALEN);
memcpy(&header.addr3, ieee->current_network.bssid, ETH_ALEN);
@@ -698,7 +702,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
header.frame_ctl = cpu_to_le16(fc);
/* Determine fragmentation size based on destination (multicast
- * and broadcast are not fragmented) */
+ * and broadcast are not fragmented)
+ */
if (is_multicast_ether_addr(header.addr1)) {
frag_size = MAX_FRAG_THRESHOLD;
qos_ctl |= QOS_CTL_NOTCONTAIN_ACK;
@@ -720,9 +725,10 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
hdr_len = IEEE80211_3ADDR_LEN;
}
/* Determine amount of payload per fragment. Regardless of if
- * this stack is providing the full 802.11 header, one will
- * eventually be affixed to this fragment -- so we must account for
- * it when determining the amount of payload space. */
+ * this stack is providing the full 802.11 header, one will
+ * eventually be affixed to this fragment -- so we must account for
+ * it when determining the amount of payload space.
+ */
bytes_per_frag = frag_size - hdr_len;
if (ieee->config &
(CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS))
@@ -734,7 +740,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
crypt->ops->extra_postfix_len;
/* Number of fragments is the total bytes_per_frag /
- * payload_per_fragment */
+ * payload_per_fragment
+ */
nr_frags = bytes / bytes_per_frag;
bytes_last_frag = bytes % bytes_per_frag;
if (bytes_last_frag)
@@ -743,8 +750,9 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
bytes_last_frag = bytes_per_frag;
/* When we allocate the TXB we allocate enough space for the reserve
- * and full fragment bytes (bytes_per_frag doesn't include prefix,
- * postfix, header, FCS, etc.) */
+ * and full fragment bytes (bytes_per_frag doesn't include prefix,
+ * postfix, header, FCS, etc.)
+ */
txb = ieee80211_alloc_txb(nr_frags, frag_size + ieee->tx_headroom, GFP_ATOMIC);
if (unlikely(!txb)) {
printk(KERN_WARNING "%s: Could not allocate TXB\n",
@@ -791,7 +799,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
memcpy(frag_hdr, &header, hdr_len);
/* If this is not the last fragment, then add the MOREFRAGS
- * bit to the frame control */
+ * bit to the frame control
+ */
if (i != nr_frags - 1) {
frag_hdr->frame_ctl = cpu_to_le16(
fc | IEEE80211_FCTL_MOREFRAGS);
@@ -824,7 +833,8 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
skb_pull(skb, bytes);
/* Encryption routine will move the header forward in order
- * to insert the IV between the header and the payload */
+ * to insert the IV between the header and the payload
+ */
if (encrypt)
ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len);
if (ieee->config &
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 22/25] Staging: rtl8192u: ieee80211: ieee80211_rx.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (20 preceding siblings ...)
2017-02-13 5:45 ` [PATCH v2 21/25] Staging: rtl8192u: ieee80211: ieee80211_tx.c " Derek Robson
@ 2017-02-13 5:45 ` Derek Robson
2017-02-13 5:45 ` [PATCH v2 23/25] Staging: rtl8192u: ieee80211: ieee80211_crypt.h " Derek Robson
` (2 subsequent siblings)
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:45 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c | 91 +++++++++++++++--------
1 file changed, 58 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index b1f2fdfcb718..99c39aa3d1b5 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -148,7 +148,8 @@ ieee80211_frag_cache_get(struct ieee80211_device *ieee,
memcpy(entry->dst_addr, hdr->addr1, ETH_ALEN);
} else {
/* received a fragment of a frame for which the head fragment
- * should have already been received */
+ * should have already been received
+ */
entry = ieee80211_frag_cache_find(ieee, seq, frag, tid,hdr->addr2,
hdr->addr1);
if (entry != NULL) {
@@ -207,7 +208,8 @@ static int ieee80211_frag_cache_invalidate(struct ieee80211_device *ieee,
*
* Responsible for handling management control frames
*
- * Called by ieee80211_rx */
+ * Called by ieee80211_rx
+ */
static inline int
ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
struct ieee80211_rx_stats *rx_stats, u16 type,
@@ -240,8 +242,9 @@ ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
ieee->dev->name);
return 0;
/*
- hostap_update_sta_ps(ieee, (struct hostap_ieee80211_hdr_4addr *)
- skb->data);*/
+ * hostap_update_sta_ps(ieee, (struct hostap_ieee80211_hdr_4addr *)
+ * skb->data);
+ */
}
if (ieee->hostapd && type == IEEE80211_TYPE_MGMT) {
@@ -249,14 +252,16 @@ ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
ieee->iw_mode == IW_MODE_MASTER) {
struct sk_buff *skb2;
/* Process beacon frames also in kernel driver to
- * update STA(AP) table statistics */
+ * update STA(AP) table statistics
+ */
skb2 = skb_clone(skb, GFP_ATOMIC);
if (skb2)
hostap_rx(skb2->dev, skb2, rx_stats);
}
/* send management frames to the user space daemon for
- * processing */
+ * processing
+ */
ieee->apdevstats.rx_packets++;
ieee->apdevstats.rx_bytes += skb->len;
prism2_rx_80211(ieee->apdev, skb, rx_stats, PRISM2_RX_MGMT);
@@ -554,7 +559,8 @@ void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_
ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
memcmp(sub_skb->data, bridge_tunnel_header, SNAP_SIZE) == 0)) {
/* remove RFC1042 or Bridge-Tunnel encapsulation and
- * replace EtherType */
+ * replace EtherType
+ */
skb_pull(sub_skb, SNAP_SIZE);
memcpy(skb_push(sub_skb, ETH_ALEN), prxb->src, ETH_ALEN);
memcpy(skb_push(sub_skb, ETH_ALEN), prxb->dst, ETH_ALEN);
@@ -885,7 +891,8 @@ static u8 parse_subframe(struct sk_buff *skb,
/* All received frames are sent to this function. @skb contains the frame in
* IEEE 802.11 format, i.e., in the format it was sent over air.
- * This function is called only as a tasklet (software IRQ). */
+ * This function is called only as a tasklet (software IRQ).
+ */
int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
struct ieee80211_rx_stats *rx_stats)
{
@@ -949,7 +956,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
#ifdef NOT_YET
/* Put this code here so that we avoid duplicating it in all
- * Rx paths. - Jean II */
+ * Rx paths. - Jean II
+ */
#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */
/* If spy monitoring on */
if (iface->spy_data.spy_number > 0) {
@@ -984,7 +992,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
* bcrx_sta_key parameter is set, station specific key is used
* even with broad/multicast targets (this is against IEEE
* 802.11, but makes it easier to use different keys with
- * stations that do not support WEP key mapping). */
+ * stations that do not support WEP key mapping).
+ */
if (!(hdr->addr1[0] & 0x01) || local->bcrx_sta_key)
(void) hostap_handle_sta_crypto(local, hdr, &crypt,
@@ -992,7 +1001,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
#endif
/* allow NULL decrypt to indicate an station specific override
- * for default encryption */
+ * for default encryption
+ */
if (crypt && (crypt->ops == NULL ||
crypt->ops->decrypt_mpdu == NULL))
crypt = NULL;
@@ -1001,7 +1011,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
/* This seems to be triggered by some (multicast?)
* frames from other than current BSS, so just drop the
* frames silently instead of filling system log with
- * these reports. */
+ * these reports.
+ */
IEEE80211_DEBUG_DROP("Decryption failed (not set)"
" (SA=%pM)\n",
hdr->addr2);
@@ -1121,7 +1132,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
#endif
//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
/* Nullfunc frames may have PS-bit set, so they must be passed to
- * hostap_handle_sta_rx() before being dropped here. */
+ * hostap_handle_sta_rx() before being dropped here.
+ */
if (stype != IEEE80211_STYPE_DATA &&
stype != IEEE80211_STYPE_DATA_CFACK &&
stype != IEEE80211_STYPE_DATA_CFPOLL &&
@@ -1181,11 +1193,13 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
if (frag == 0) {
/* copy first fragment (including full headers) into
- * beginning of the fragment cache skb */
+ * beginning of the fragment cache skb
+ */
memcpy(skb_put(frag_skb, flen), skb->data, flen);
} else {
/* append frame payload to the end of the fragment
- * cache skb */
+ * cache skb
+ */
memcpy(skb_put(frag_skb, flen), skb->data + hdrlen,
flen);
}
@@ -1195,19 +1209,22 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
if (fc & IEEE80211_FCTL_MOREFRAGS) {
/* more fragments expected - leave the skb in fragment
* cache for now; it will be delivered to upper layers
- * after all fragments have been received */
+ * after all fragments have been received
+ */
goto rx_exit;
}
/* this was the last fragment and the frame will be
- * delivered, so remove skb from fragment cache */
+ * delivered, so remove skb from fragment cache
+ */
skb = frag_skb;
hdr = (struct rtl_80211_hdr_4addr *) skb->data;
ieee80211_frag_cache_invalidate(ieee, hdr);
}
/* skb: hdr + (possible reassembled) full MSDU payload; possibly still
- * encrypted/authenticated */
+ * encrypted/authenticated
+ */
if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
{
@@ -1226,7 +1243,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
#ifdef CONFIG_IEEE80211_DEBUG
/* pass unencrypted EAPOL frames even if encryption is
- * configured */
+ * configured
+ */
struct eapol *eap = (struct eapol *)(skb->data +
24);
IEEE80211_DEBUG_EAP("RX: IEEE 802.1X EAPOL frame: %s\n",
@@ -1261,10 +1279,10 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
goto rx_dropped;
}
/*
- if(ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
- printk(KERN_WARNING "RX: IEEE802.1X EPAOL frame!\n");
- }
-*/
+ * if(ieee80211_is_eapol_frame(ieee, skb, hdrlen)) {
+ * printk(KERN_WARNING "RX: IEEE802.1X EPAOL frame!\n");
+ * }
+ */
//added by amy for reorder
if (ieee->current_network.qos_data.active && IsQoSDataFrame(skb->data)
&& !is_multicast_ether_addr(hdr->addr1))
@@ -1310,7 +1328,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
ethertype != ETH_P_AARP && ethertype != ETH_P_IPX) ||
memcmp(sub_skb->data, bridge_tunnel_header, SNAP_SIZE) == 0)) {
/* remove RFC1042 or Bridge-Tunnel encapsulation and
- * replace EtherType */
+ * replace EtherType
+ */
skb_pull(sub_skb, SNAP_SIZE);
memcpy(skb_push(sub_skb, ETH_ALEN), src, ETH_ALEN);
memcpy(skb_push(sub_skb, ETH_ALEN), dst, ETH_ALEN);
@@ -1366,7 +1385,8 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
/* Returning 0 indicates to caller that we have not handled the SKB--
* so it is still allocated and can be used again by underlying
- * hardware as a DMA target */
+ * hardware as a DMA target
+ */
return 0;
}
EXPORT_SYMBOL(ieee80211_rx);
@@ -1376,9 +1396,9 @@ EXPORT_SYMBOL(ieee80211_rx);
static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 };
/*
-* Make the structure we read from the beacon packet to have
-* the right values
-*/
+ * Make the structure we read from the beacon packet to have
+ * the right values
+ */
static int ieee80211_verify_qos_info(struct ieee80211_qos_information_element
*info_element, int sub_type)
{
@@ -1631,7 +1651,8 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
length, info_element->id);
/* We stop processing but don't return an error here
* because some misbehaviour APs break this rule. ie.
- * Orinoco AP1000. */
+ * Orinoco AP1000.
+ */
break;
}
@@ -2255,7 +2276,8 @@ static inline int is_same_network(struct ieee80211_network *src,
/* A network is only a duplicate if the channel, BSSID, ESSID
* and the capability field (in particular IBSS and BSS) all match.
* We treat all <hidden> with the same BSSID and channel
- * as one network */
+ * as one network
+ */
return //((src->ssid_len == dst->ssid_len) &&
(((src->ssid_len == dst->ssid_len) || (ieee->iw_mode == IW_MODE_INFRA)) &&
(src->channel == dst->channel) &&
@@ -2491,10 +2513,12 @@ static inline void ieee80211_process_probe_response(
*
* NOTE: This search is definitely not optimized. Once its doing
* the "right thing" we'll optimize it for efficiency if
- * necessary */
+ * necessary
+ */
/* Search for this entry in the list and update it if it is
- * already there. */
+ * already there.
+ */
spin_lock_irqsave(&ieee->lock, flags);
@@ -2525,7 +2549,8 @@ static inline void ieee80211_process_probe_response(
}
/* If we didn't find a match, then get a new network slot to initialize
- * with this beacon's information */
+ * with this beacon's information
+ */
if (&target->list == &ieee->network_list) {
if (list_empty(&ieee->network_free_list)) {
/* If there are no more slots, expire the oldest */
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 23/25] Staging: rtl8192u: ieee80211: ieee80211_crypt.h - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (21 preceding siblings ...)
2017-02-13 5:45 ` [PATCH v2 22/25] Staging: rtl8192u: ieee80211: ieee80211_rx.c " Derek Robson
@ 2017-02-13 5:45 ` Derek Robson
2017-02-13 5:46 ` [PATCH v2 24/25] Staging: rtl8192u: ieee80211: ieee80211_crypt.c " Derek Robson
2017-02-13 5:46 ` [PATCH v2 25/25] Staging: rtl8192u: ieee80211: ieee80211.h " Derek Robson
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:45 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.h | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.h b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.h
index 0b4ea431982d..005bf89aae65 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.h
@@ -30,7 +30,8 @@ struct ieee80211_crypto_ops {
/* init new crypto context (e.g., allocate private data space,
* select IV, etc.); returns NULL on failure or pointer to allocated
- * private data on success */
+ * private data on success
+ */
void * (*init)(int keyidx);
/* deinitialize crypto context and free allocated private data */
@@ -46,7 +47,8 @@ struct ieee80211_crypto_ops {
int (*decrypt_mpdu)(struct sk_buff *skb, int hdr_len, void *priv);
/* These functions are called for full MSDUs, i.e. full frames.
- * These can be NULL if full MSDU operations are not needed. */
+ * These can be NULL if full MSDU operations are not needed.
+ */
int (*encrypt_msdu)(struct sk_buff *skb, int hdr_len, void *priv);
int (*decrypt_msdu)(struct sk_buff *skb, int keyidx, int hdr_len,
void *priv);
@@ -55,14 +57,16 @@ struct ieee80211_crypto_ops {
int (*get_key)(void *key, int len, u8 *seq, void *priv);
/* procfs handler for printing out key information and possible
- * statistics */
+ * statistics
+ */
char * (*print_stats)(char *p, void *priv);
/* maximum number of bytes added by encryption; encrypt buf is
* allocated with extra_prefix_len bytes, copy of in_buf, and
* extra_postfix_len; encrypt need not use all this space, but
* the result must start at the beginning of the buffer and correct
- * length must be returned */
+ * length must be returned
+ */
int extra_prefix_len, extra_postfix_len;
struct module *owner;
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 24/25] Staging: rtl8192u: ieee80211: ieee80211_crypt.c - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (22 preceding siblings ...)
2017-02-13 5:45 ` [PATCH v2 23/25] Staging: rtl8192u: ieee80211: ieee80211_crypt.h " Derek Robson
@ 2017-02-13 5:46 ` Derek Robson
2017-02-13 5:46 ` [PATCH v2 25/25] Staging: rtl8192u: ieee80211: ieee80211.h " Derek Robson
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:46 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c
index 9cf90d040cfe..8b2cd0c2caa7 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c
@@ -88,7 +88,8 @@ void ieee80211_crypt_delayed_deinit(struct ieee80211_device *ieee,
/* must not run ops->deinit() while there may be pending encrypt or
* decrypt operations. Use a list of delayed deinits to avoid needing
- * locking. */
+ * locking.
+ */
spin_lock_irqsave(&ieee->lock, flags);
list_add(&tmp->list, &ieee->crypt_deinit_list);
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread* [PATCH v2 25/25] Staging: rtl8192u: ieee80211: ieee80211.h - style fix
2017-02-13 5:38 [PATCH v2 00/25] Staging: rtl8192u - fixed block comments Derek Robson
` (23 preceding siblings ...)
2017-02-13 5:46 ` [PATCH v2 24/25] Staging: rtl8192u: ieee80211: ieee80211_crypt.c " Derek Robson
@ 2017-02-13 5:46 ` Derek Robson
24 siblings, 0 replies; 27+ messages in thread
From: Derek Robson @ 2017-02-13 5:46 UTC (permalink / raw)
To: gregkh, robsonde; +Cc: devel, linux-kernel
Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
---
drivers/staging/rtl8192u/ieee80211/ieee80211.h | 61 +++++++++++++++-----------
1 file changed, 36 insertions(+), 25 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index 10bb23739748..71add69df815 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -329,12 +329,13 @@ typedef struct ieee_param {
// linux under 2.6.9 release may not support it, so modify it for common use
#define IEEE80211_DATA_LEN 2304
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
- 6.2.1.1.2.
-
- The figure in section 7.1.2 suggests a body size of up to 2312
- bytes is allowed, which is a bit confusing, I suspect this
- represents the 2304 bytes of real data, plus a possible 8 bytes of
- WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+ * 6.2.1.1.2.
+ *
+ * The figure in section 7.1.2 suggests a body size of up to 2312
+ * bytes is allowed, which is a bit confusing, I suspect this
+ * represents the 2304 bytes of real data, plus a possible 8 bytes of
+ * WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro)
+ */
#define IEEE80211_1ADDR_LEN 10
#define IEEE80211_2ADDR_LEN 16
#define IEEE80211_3ADDR_LEN 24
@@ -685,7 +686,8 @@ struct ieee_ibss_seq {
/* NOTE: This data is for statistical purposes; not all hardware provides this
* information for frames received. Not setting these will not cause
- * any adverse affects. */
+ * any adverse affects.
+ */
struct ieee80211_rx_stats {
u32 mac_time[2];
s8 rssi;
@@ -754,7 +756,8 @@ struct ieee80211_rx_stats {
/* IEEE 802.11 requires that STA supports concurrent reception of at least
* three fragmented frames. This define can be increased to support more
* concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly.
+ */
#define IEEE80211_FRAG_CACHE_LEN 4
struct ieee80211_frag_entry {
@@ -836,15 +839,15 @@ struct ieee80211_security {
/*
- 802.11 data frame from AP
- ,-------------------------------------------------------------------.
-Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
- |------|------|---------|---------|---------|------|---------|------|
-Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
- | | tion | (BSSID) | | | ence | data | |
- `-------------------------------------------------------------------'
-Total: 28-2340 bytes
-*/
+ * 802.11 data frame from AP
+ * ,-------------------------------------------------------------------.
+ * Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
+ * |------|------|---------|---------|---------|------|---------|------|
+ * Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
+ * | | tion | (BSSID) | | | ence | data | |
+ * `-------------------------------------------------------------------'
+ * Total: 28-2340 bytes
+ */
/* Management Frame Information Element Types */
enum ieee80211_mfie {
@@ -882,7 +885,8 @@ enum ieee80211_mfie {
/* Minimal header; can be used for passing 802.11 frames with sufficient
* information to determine what type of underlying data type is actually
- * stored in the data. */
+ * stored in the data.
+ */
struct rtl_80211_hdr {
__le16 frame_ctl;
__le16 duration_id;
@@ -980,7 +984,8 @@ struct ieee80211_probe_response {
__le16 beacon_interval;
__le16 capability;
/* SSID, supported rates, FH params, DS params,
- * CF params, IBSS params, TIM (if beacon), RSN */
+ * CF params, IBSS params, TIM (if beacon), RSN
+ */
struct ieee80211_info_element info_element[0];
} __packed;
@@ -1055,7 +1060,8 @@ typedef union _frameqos {
/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
* only use 8, and then use extended rates for the remaining supported
* rates. Other APs, however, stick all of their supported rates on the
- * main rates information element... */
+ * main rates information element...
+ */
#define MAX_RATES_LENGTH ((u8)12)
#define MAX_RATES_EX_LENGTH ((u8)16)
#define MAX_NETWORK_COUNT 128
@@ -1677,14 +1683,16 @@ struct ieee80211_device {
spinlock_t wpax_suitlist_lock;
int tx_headroom; /* Set to size of any additional room needed at front
- * of allocated Tx SKBs */
+ * of allocated Tx SKBs
+ */
u32 config;
/* WEP and other encryption related settings at the device level */
int open_wep; /* Set to 1 to allow unencrypted frames */
int auth_mode;
int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
- * WEP key changes */
+ * WEP key changes
+ */
/* If the host performs {en,de}cryption, then set to 1 */
int host_encrypt;
@@ -1719,7 +1727,8 @@ struct ieee80211_device {
int crypt_quiesced;
int bcrx_sta_key; /* use individual keys to override default keys even
- * with RX of broad/multicast frames */
+ * with RX of broad/multicast frames
+ */
/* Fragmentation structures */
// each streaming contain a entry
@@ -2004,7 +2013,8 @@ struct ieee80211_device {
void (*InitialGainHandler)(struct net_device *dev, u8 Operation);
/* This must be the last item so that it points to the data
- * allocated beyond this structure by alloc_ieee80211 */
+ * allocated beyond this structure by alloc_ieee80211
+ */
u8 priv[0];
};
@@ -2033,7 +2043,8 @@ struct ieee80211_device {
/* The ieee802.11 stack will manages the netif queue
* wake/stop for the driver, taking care of 802.11
- * fragmentation. See softmac.c for details. */
+ * fragmentation. See softmac.c for details.
+ */
#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
/* Uses only the softmac_data_hard_start_xmit
--
2.11.1
^ permalink raw reply related [flat|nested] 27+ messages in thread