[PATCH v4 0/4] Support pli1209bc Digital Supervisor

[PATCH v4 0/4] Support pli1209bc Digital Supervisor

[Marcello Sylvester Bauer]

Hi,

This patch set adds support for PLI1209BC Digital Supervisor from Vicor
Corporation. It replaces the previous submitted driver "bcm6123" [1],
since there are multiple digital supervisors, which uses BCMs in different
configurations [2].

Change in v4:
- Add Documetation to index.rst
- Add missing license identifier
- Fix typo and Makefile obj order

Change in v3:
- prevent potential over- or underflow of PMBUS_READ_POUT

Changes in v2:
- Multiply PMBUS_READ_POUT with 10 (R=1)
  instead of dividing PMBUS_READ_PIN by 10.
- Set all pmbus formats to direct.
- Comment reason why page 0 is redundant.
- Import pmbus namespace.

[1]: https://www.spinics.net/lists/linux-hwmon/msg14097.html
[2]: https://www.spinics.net/lists/linux-hwmon/msg14123.html

Marcello Sylvester Bauer (4):
  dt-bindings: vendor-prefixes: add Vicor Corporation
  dt-bindings:trivial-devices: Add pli1209bc
  pmbus: Add support for pli1209bc
  pmbus (pli1209bc): Add regulator support

 .../devicetree/bindings/trivial-devices.yaml  |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 Documentation/hwmon/index.rst                 |   1 +
 Documentation/hwmon/pli1209bc.rst             |  75 +++++++++
 drivers/hwmon/pmbus/Kconfig                   |  16 ++
 drivers/hwmon/pmbus/Makefile                  |   1 +
 drivers/hwmon/pmbus/pli1209bc.c               | 146 ++++++++++++++++++
 7 files changed, 243 insertions(+)
 create mode 100644 Documentation/hwmon/pli1209bc.rst
 create mode 100644 drivers/hwmon/pmbus/pli1209bc.c

-- 
2.34.1

[PATCH v4 1/4] dt-bindings: vendor-prefixes: add Vicor Corporation

[Marcello Sylvester Bauer]

Add vendor prefix for Vicor Corporation.

Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 294093d45a23..047a83a089ce 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1298,6 +1298,8 @@ patternProperties:
     description: Vertexcom Technologies, Inc.
   "^via,.*":
     description: VIA Technologies, Inc.
+  "^vicor,.*":
+    description: Vicor Corporation
   "^videostrong,.*":
     description: Videostrong Technology Co., Ltd.
   "^virtio,.*":
-- 
2.34.1

Re: [PATCH v4 1/4] dt-bindings: vendor-prefixes: add Vicor Corporation

[Rob Herring]

On Mon, 21 Feb 2022 10:42:04 +0100, Marcello Sylvester Bauer wrote:
> Add vendor prefix for Vicor Corporation.
> 
> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 1/4] dt-bindings: vendor-prefixes: add Vicor Corporation

[Guenter Roeck]

On Mon, Feb 21, 2022 at 10:42:04AM +0100, Marcello Sylvester Bauer wrote:
> Add vendor prefix for Vicor Corporation.
> 
> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> Acked-by: Rob Herring <robh@kernel.org>

Applied to hwmon-next.

Thanks,
Guenter

> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> index 294093d45a23..047a83a089ce 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
> @@ -1298,6 +1298,8 @@ patternProperties:
>      description: Vertexcom Technologies, Inc.
>    "^via,.*":
>      description: VIA Technologies, Inc.
> +  "^vicor,.*":
> +    description: Vicor Corporation
>    "^videostrong,.*":
>      description: Videostrong Technology Co., Ltd.
>    "^virtio,.*":

[PATCH v4 2/4] dt-bindings:trivial-devices: Add pli1209bc

[Marcello Sylvester Bauer]

Add trivial device entry for PLI1209BC Digital Supervisor from Vicor
Corporation.

Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
---
 Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 091792ba993e..d03d90360aa0 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -354,6 +354,8 @@ properties:
           - ti,tps544c25
             # Winbond/Nuvoton H/W Monitor
           - winbond,w83793
+            # Vicor Corporation Digital Supervisor
+          - vicor,pli1209bc
             # i2c trusted platform module (TPM)
           - winbond,wpct301
 
-- 
2.34.1

Re: [PATCH v4 2/4] dt-bindings:trivial-devices: Add pli1209bc

[Rob Herring]

On Mon, 21 Feb 2022 10:42:05 +0100, Marcello Sylvester Bauer wrote:
> Add trivial device entry for PLI1209BC Digital Supervisor from Vicor
> Corporation.
> 
> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> ---
>  Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH v4 2/4] dt-bindings:trivial-devices: Add pli1209bc

[Guenter Roeck]

On Mon, Feb 21, 2022 at 10:42:05AM +0100, Marcello Sylvester Bauer wrote:
> Add trivial device entry for PLI1209BC Digital Supervisor from Vicor
> Corporation.
> 
> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> Acked-by: Rob Herring <robh@kernel.org>

Applied to hwmon-next.

Thanks,
Guenter

> ---
>  Documentation/devicetree/bindings/trivial-devices.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
> index 091792ba993e..d03d90360aa0 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.yaml
> +++ b/Documentation/devicetree/bindings/trivial-devices.yaml
> @@ -354,6 +354,8 @@ properties:
>            - ti,tps544c25
>              # Winbond/Nuvoton H/W Monitor
>            - winbond,w83793
> +            # Vicor Corporation Digital Supervisor
> +          - vicor,pli1209bc
>              # i2c trusted platform module (TPM)
>            - winbond,wpct301
>  

[PATCH v4 3/4] pmbus: Add support for pli1209bc

[Marcello Sylvester Bauer]

PLI1209BC is a Digital Supervisor from Vicor Corporation.

Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
---
 Documentation/hwmon/index.rst     |   1 +
 Documentation/hwmon/pli1209bc.rst |  75 +++++++++++++++++++
 drivers/hwmon/pmbus/Kconfig       |   9 +++
 drivers/hwmon/pmbus/Makefile      |   1 +
 drivers/hwmon/pmbus/pli1209bc.c   | 115 ++++++++++++++++++++++++++++++
 5 files changed, 201 insertions(+)
 create mode 100644 Documentation/hwmon/pli1209bc.rst
 create mode 100644 drivers/hwmon/pmbus/pli1209bc.c

diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index b69fdaf1af82..075d1defcd20 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -161,6 +161,7 @@ Hardware Monitoring Kernel Drivers
    pc87427
    pcf8591
    pim4328
+   pli1209bc
    pm6764tr
    pmbus
    powr1220
diff --git a/Documentation/hwmon/pli1209bc.rst b/Documentation/hwmon/pli1209bc.rst
new file mode 100644
index 000000000000..ea5b3f68a515
--- /dev/null
+++ b/Documentation/hwmon/pli1209bc.rst
@@ -0,0 +1,75 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver pli1209bc
+=======================
+
+Supported chips:
+
+  * Digital Supervisor PLI1209BC
+
+    Prefix: 'pli1209bc'
+
+    Addresses scanned: 0x50 - 0x5F
+
+    Datasheet: https://www.vicorpower.com/documents/datasheets/ds-PLI1209BCxyzz-VICOR.pdf
+
+Authors:
+    - Marcello Sylvester Bauer <sylv@sylv.io>
+
+Description
+-----------
+
+The Vicor PLI1209BC is an isolated digital power system supervisor that provides
+a communication interface between a host processor and one Bus Converter Module
+(BCM). The PLI communicates with a system controller via a PMBus compatible
+interface over an isolated UART interface. Through the PLI, the host processor
+can configure, set protection limits, and monitor the BCM.
+
+Sysfs entries
+-------------
+
+======================= ========================================================
+in1_label		"vin2"
+in1_input		Input voltage.
+in1_rated_min		Minimum rated input voltage.
+in1_rated_max		Maximum rated input voltage.
+in1_max			Maximum input voltage.
+in1_max_alarm		Input voltage high alarm.
+in1_crit		Critical input voltage.
+in1_crit_alarm		Input voltage critical alarm.
+
+in2_label		"vout2"
+in2_input		Output voltage.
+in2_rated_min		Minimum rated output voltage.
+in2_rated_max		Maximum rated output voltage.
+in2_alarm		Output voltage alarm
+
+curr1_label		"iin2"
+curr1_input		Input current.
+curr1_max		Maximum input current.
+curr1_max_alarm		Maximum input current high alarm.
+curr1_crit		Critical input current.
+curr1_crit_alarm	Input current critical alarm.
+
+curr2_label		"iout2"
+curr2_input		Output current.
+curr2_crit		Critical output current.
+curr2_crit_alarm	Output current critical alarm.
+curr2_max		Maximum output current.
+curr2_max_alarm		Output current high alarm.
+
+power1_label		"pin2"
+power1_input		Input power.
+power1_alarm		Input power alarm.
+
+power2_label		"pout2"
+power2_input		Output power.
+power2_rated_max	Maximum rated output power.
+
+temp1_input		Die temperature.
+temp1_alarm		Die temperature alarm.
+temp1_max		Maximum die temperature.
+temp1_max_alarm		Die temperature high alarm.
+temp1_crit		Critical die temperature.
+temp1_crit_alarm	Die temperature critical alarm.
+======================= ========================================================
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index c73aa50c7615..f18f67a94697 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -317,6 +317,15 @@ config SENSORS_PIM4328
 	  This driver can also be built as a module. If so, the module will
 	  be called pim4328.
 
+config SENSORS_PLI1209BC
+	tristate "Vicor PLI1209BC"
+	help
+	  If you say yes here you get hardware monitoring support for Vicor
+	  PLI1209BC Digital Supervisor.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pli1209bc.
+
 config SENSORS_PM6764TR
 	tristate "ST PM6764TR"
 	help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index e5935f70c9e0..a4a96ac71de7 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
 obj-$(CONFIG_SENSORS_MP2888)	+= mp2888.o
 obj-$(CONFIG_SENSORS_MP2975)	+= mp2975.o
 obj-$(CONFIG_SENSORS_MP5023)	+= mp5023.o
+obj-$(CONFIG_SENSORS_PLI1209BC)	+= pli1209bc.o
 obj-$(CONFIG_SENSORS_PM6764TR)	+= pm6764tr.o
 obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
 obj-$(CONFIG_SENSORS_Q54SJ108A2)	+= q54sj108a2.o
diff --git a/drivers/hwmon/pmbus/pli1209bc.c b/drivers/hwmon/pmbus/pli1209bc.c
new file mode 100644
index 000000000000..5f8847307e55
--- /dev/null
+++ b/drivers/hwmon/pmbus/pli1209bc.c
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Vicor PLI1209BC Digital Supervisor
+ *
+ * Copyright (c) 2022 9elements GmbH
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+/*
+ * The capability command is only supported at page 0. Probing the device while
+ * the page register is set to 1 will falsely enable PEC support. Disable
+ * capability probing accordingly, since the PLI1209BC does not have any
+ * additional capabilities.
+ */
+static struct pmbus_platform_data pli1209bc_plat_data = {
+	.flags = PMBUS_NO_CAPABILITY,
+};
+
+static int pli1209bc_read_word_data(struct i2c_client *client, int page,
+				    int phase, int reg)
+{
+	int data;
+
+	switch (reg) {
+	/* PMBUS_READ_POUT uses a direct format with R=0 */
+	case PMBUS_READ_POUT:
+		data = pmbus_read_word_data(client, page, phase, reg);
+		if (data < 0)
+			return data;
+		data = sign_extend32(data, 15) * 10;
+		return clamp_val(data, -32768, 32767) & 0xffff;
+	default:
+		return -ENODATA;
+	}
+}
+
+static struct pmbus_driver_info pli1209bc_info = {
+	.pages = 2,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_CURRENT_IN] = direct,
+	.format[PSC_CURRENT_OUT] = direct,
+	.format[PSC_POWER] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.m[PSC_VOLTAGE_IN] = 1,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = 1,
+	.m[PSC_VOLTAGE_OUT] = 1,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = 1,
+	.m[PSC_CURRENT_IN] = 1,
+	.b[PSC_CURRENT_IN] = 0,
+	.R[PSC_CURRENT_IN] = 3,
+	.m[PSC_CURRENT_OUT] = 1,
+	.b[PSC_CURRENT_OUT] = 0,
+	.R[PSC_CURRENT_OUT] = 2,
+	.m[PSC_POWER] = 1,
+	.b[PSC_POWER] = 0,
+	.R[PSC_POWER] = 1,
+	.m[PSC_TEMPERATURE] = 1,
+	.b[PSC_TEMPERATURE] = 0,
+	.R[PSC_TEMPERATURE] = 0,
+	/*
+	 * Page 0 sums up all attributes except voltage readings.
+	 * The pli1209 digital supervisor only contains a single BCM, making
+	 * page 0 redundant.
+	 */
+	.func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT
+	    | PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT
+	    | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
+	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+	    | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT,
+	.read_word_data = pli1209bc_read_word_data,
+};
+
+static int pli1209bc_probe(struct i2c_client *client)
+{
+	client->dev.platform_data = &pli1209bc_plat_data;
+	return pmbus_do_probe(client, &pli1209bc_info);
+}
+
+static const struct i2c_device_id pli1209bc_id[] = {
+	{"pli1209bc", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, pli1209bc_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pli1209bc_of_match[] = {
+	{ .compatible = "vicor,pli1209bc" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, pli1209bc_of_match);
+#endif
+
+static struct i2c_driver pli1209bc_driver = {
+	.driver = {
+		   .name = "pli1209bc",
+		   .of_match_table = of_match_ptr(pli1209bc_of_match),
+		   },
+	.probe_new = pli1209bc_probe,
+	.id_table = pli1209bc_id,
+};
+
+module_i2c_driver(pli1209bc_driver);
+
+MODULE_AUTHOR("Marcello Sylvester Bauer <sylv@sylv.io>");
+MODULE_DESCRIPTION("PMBus driver for Vicor PLI1209BC");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
-- 
2.34.1

Re: [PATCH v4 3/4] pmbus: Add support for pli1209bc

[Guenter Roeck]

On Mon, Feb 21, 2022 at 10:42:06AM +0100, Marcello Sylvester Bauer wrote:
> PLI1209BC is a Digital Supervisor from Vicor Corporation.
> 
> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>

Applied to hwmon-next.

Thanks,
Guenter

> ---
>  Documentation/hwmon/index.rst     |   1 +
>  Documentation/hwmon/pli1209bc.rst |  75 +++++++++++++++++++
>  drivers/hwmon/pmbus/Kconfig       |   9 +++
>  drivers/hwmon/pmbus/Makefile      |   1 +
>  drivers/hwmon/pmbus/pli1209bc.c   | 115 ++++++++++++++++++++++++++++++
>  5 files changed, 201 insertions(+)
>  create mode 100644 Documentation/hwmon/pli1209bc.rst
>  create mode 100644 drivers/hwmon/pmbus/pli1209bc.c
> 
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index b69fdaf1af82..075d1defcd20 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -161,6 +161,7 @@ Hardware Monitoring Kernel Drivers
>     pc87427
>     pcf8591
>     pim4328
> +   pli1209bc
>     pm6764tr
>     pmbus
>     powr1220
> diff --git a/Documentation/hwmon/pli1209bc.rst b/Documentation/hwmon/pli1209bc.rst
> new file mode 100644
> index 000000000000..ea5b3f68a515
> --- /dev/null
> +++ b/Documentation/hwmon/pli1209bc.rst
> @@ -0,0 +1,75 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Kernel driver pli1209bc
> +=======================
> +
> +Supported chips:
> +
> +  * Digital Supervisor PLI1209BC
> +
> +    Prefix: 'pli1209bc'
> +
> +    Addresses scanned: 0x50 - 0x5F
> +
> +    Datasheet: https://www.vicorpower.com/documents/datasheets/ds-PLI1209BCxyzz-VICOR.pdf
> +
> +Authors:
> +    - Marcello Sylvester Bauer <sylv@sylv.io>
> +
> +Description
> +-----------
> +
> +The Vicor PLI1209BC is an isolated digital power system supervisor that provides
> +a communication interface between a host processor and one Bus Converter Module
> +(BCM). The PLI communicates with a system controller via a PMBus compatible
> +interface over an isolated UART interface. Through the PLI, the host processor
> +can configure, set protection limits, and monitor the BCM.
> +
> +Sysfs entries
> +-------------
> +
> +======================= ========================================================
> +in1_label		"vin2"
> +in1_input		Input voltage.
> +in1_rated_min		Minimum rated input voltage.
> +in1_rated_max		Maximum rated input voltage.
> +in1_max			Maximum input voltage.
> +in1_max_alarm		Input voltage high alarm.
> +in1_crit		Critical input voltage.
> +in1_crit_alarm		Input voltage critical alarm.
> +
> +in2_label		"vout2"
> +in2_input		Output voltage.
> +in2_rated_min		Minimum rated output voltage.
> +in2_rated_max		Maximum rated output voltage.
> +in2_alarm		Output voltage alarm
> +
> +curr1_label		"iin2"
> +curr1_input		Input current.
> +curr1_max		Maximum input current.
> +curr1_max_alarm		Maximum input current high alarm.
> +curr1_crit		Critical input current.
> +curr1_crit_alarm	Input current critical alarm.
> +
> +curr2_label		"iout2"
> +curr2_input		Output current.
> +curr2_crit		Critical output current.
> +curr2_crit_alarm	Output current critical alarm.
> +curr2_max		Maximum output current.
> +curr2_max_alarm		Output current high alarm.
> +
> +power1_label		"pin2"
> +power1_input		Input power.
> +power1_alarm		Input power alarm.
> +
> +power2_label		"pout2"
> +power2_input		Output power.
> +power2_rated_max	Maximum rated output power.
> +
> +temp1_input		Die temperature.
> +temp1_alarm		Die temperature alarm.
> +temp1_max		Maximum die temperature.
> +temp1_max_alarm		Die temperature high alarm.
> +temp1_crit		Critical die temperature.
> +temp1_crit_alarm	Die temperature critical alarm.
> +======================= ========================================================
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index c73aa50c7615..f18f67a94697 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -317,6 +317,15 @@ config SENSORS_PIM4328
>  	  This driver can also be built as a module. If so, the module will
>  	  be called pim4328.
>  
> +config SENSORS_PLI1209BC
> +	tristate "Vicor PLI1209BC"
> +	help
> +	  If you say yes here you get hardware monitoring support for Vicor
> +	  PLI1209BC Digital Supervisor.
> +
> +	  This driver can also be built as a module. If so, the module will
> +	  be called pli1209bc.
> +
>  config SENSORS_PM6764TR
>  	tristate "ST PM6764TR"
>  	help
> diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
> index e5935f70c9e0..a4a96ac71de7 100644
> --- a/drivers/hwmon/pmbus/Makefile
> +++ b/drivers/hwmon/pmbus/Makefile
> @@ -33,6 +33,7 @@ obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
>  obj-$(CONFIG_SENSORS_MP2888)	+= mp2888.o
>  obj-$(CONFIG_SENSORS_MP2975)	+= mp2975.o
>  obj-$(CONFIG_SENSORS_MP5023)	+= mp5023.o
> +obj-$(CONFIG_SENSORS_PLI1209BC)	+= pli1209bc.o
>  obj-$(CONFIG_SENSORS_PM6764TR)	+= pm6764tr.o
>  obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
>  obj-$(CONFIG_SENSORS_Q54SJ108A2)	+= q54sj108a2.o
> diff --git a/drivers/hwmon/pmbus/pli1209bc.c b/drivers/hwmon/pmbus/pli1209bc.c
> new file mode 100644
> index 000000000000..5f8847307e55
> --- /dev/null
> +++ b/drivers/hwmon/pmbus/pli1209bc.c
> @@ -0,0 +1,115 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Hardware monitoring driver for Vicor PLI1209BC Digital Supervisor
> + *
> + * Copyright (c) 2022 9elements GmbH
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pmbus.h>
> +#include "pmbus.h"
> +
> +/*
> + * The capability command is only supported at page 0. Probing the device while
> + * the page register is set to 1 will falsely enable PEC support. Disable
> + * capability probing accordingly, since the PLI1209BC does not have any
> + * additional capabilities.
> + */
> +static struct pmbus_platform_data pli1209bc_plat_data = {
> +	.flags = PMBUS_NO_CAPABILITY,
> +};
> +
> +static int pli1209bc_read_word_data(struct i2c_client *client, int page,
> +				    int phase, int reg)
> +{
> +	int data;
> +
> +	switch (reg) {
> +	/* PMBUS_READ_POUT uses a direct format with R=0 */
> +	case PMBUS_READ_POUT:
> +		data = pmbus_read_word_data(client, page, phase, reg);
> +		if (data < 0)
> +			return data;
> +		data = sign_extend32(data, 15) * 10;
> +		return clamp_val(data, -32768, 32767) & 0xffff;
> +	default:
> +		return -ENODATA;
> +	}
> +}
> +
> +static struct pmbus_driver_info pli1209bc_info = {
> +	.pages = 2,
> +	.format[PSC_VOLTAGE_IN] = direct,
> +	.format[PSC_VOLTAGE_OUT] = direct,
> +	.format[PSC_CURRENT_IN] = direct,
> +	.format[PSC_CURRENT_OUT] = direct,
> +	.format[PSC_POWER] = direct,
> +	.format[PSC_TEMPERATURE] = direct,
> +	.m[PSC_VOLTAGE_IN] = 1,
> +	.b[PSC_VOLTAGE_IN] = 0,
> +	.R[PSC_VOLTAGE_IN] = 1,
> +	.m[PSC_VOLTAGE_OUT] = 1,
> +	.b[PSC_VOLTAGE_OUT] = 0,
> +	.R[PSC_VOLTAGE_OUT] = 1,
> +	.m[PSC_CURRENT_IN] = 1,
> +	.b[PSC_CURRENT_IN] = 0,
> +	.R[PSC_CURRENT_IN] = 3,
> +	.m[PSC_CURRENT_OUT] = 1,
> +	.b[PSC_CURRENT_OUT] = 0,
> +	.R[PSC_CURRENT_OUT] = 2,
> +	.m[PSC_POWER] = 1,
> +	.b[PSC_POWER] = 0,
> +	.R[PSC_POWER] = 1,
> +	.m[PSC_TEMPERATURE] = 1,
> +	.b[PSC_TEMPERATURE] = 0,
> +	.R[PSC_TEMPERATURE] = 0,
> +	/*
> +	 * Page 0 sums up all attributes except voltage readings.
> +	 * The pli1209 digital supervisor only contains a single BCM, making
> +	 * page 0 redundant.
> +	 */
> +	.func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT
> +	    | PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT
> +	    | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
> +	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
> +	    | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT,
> +	.read_word_data = pli1209bc_read_word_data,
> +};
> +
> +static int pli1209bc_probe(struct i2c_client *client)
> +{
> +	client->dev.platform_data = &pli1209bc_plat_data;
> +	return pmbus_do_probe(client, &pli1209bc_info);
> +}
> +
> +static const struct i2c_device_id pli1209bc_id[] = {
> +	{"pli1209bc", 0},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, pli1209bc_id);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id pli1209bc_of_match[] = {
> +	{ .compatible = "vicor,pli1209bc" },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, pli1209bc_of_match);
> +#endif
> +
> +static struct i2c_driver pli1209bc_driver = {
> +	.driver = {
> +		   .name = "pli1209bc",
> +		   .of_match_table = of_match_ptr(pli1209bc_of_match),
> +		   },
> +	.probe_new = pli1209bc_probe,
> +	.id_table = pli1209bc_id,
> +};
> +
> +module_i2c_driver(pli1209bc_driver);
> +
> +MODULE_AUTHOR("Marcello Sylvester Bauer <sylv@sylv.io>");
> +MODULE_DESCRIPTION("PMBus driver for Vicor PLI1209BC");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS(PMBUS);

[PATCH v4 4/4] pmbus (pli1209bc): Add regulator support

[Marcello Sylvester Bauer]

Add regulator support for PLI1209BC Digital Supervisor.

Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
---
 drivers/hwmon/pmbus/Kconfig     |  7 +++++++
 drivers/hwmon/pmbus/pli1209bc.c | 31 +++++++++++++++++++++++++++++++
 2 files changed, 38 insertions(+)

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index f18f67a94697..6552467c588d 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -326,6 +326,13 @@ config SENSORS_PLI1209BC
 	  This driver can also be built as a module. If so, the module will
 	  be called pli1209bc.
 
+config SENSORS_PLI1209BC_REGULATOR
+	bool "Regulator support for PLI1209BC"
+	depends on SENSORS_PLI1209BC && REGULATOR
+	help
+	  If you say yes here you get regulator support for Vicor PLI1209BC
+	  Digital Supervisor.
+
 config SENSORS_PM6764TR
 	tristate "ST PM6764TR"
 	help
diff --git a/drivers/hwmon/pmbus/pli1209bc.c b/drivers/hwmon/pmbus/pli1209bc.c
index 5f8847307e55..05b4ee35ba27 100644
--- a/drivers/hwmon/pmbus/pli1209bc.c
+++ b/drivers/hwmon/pmbus/pli1209bc.c
@@ -8,6 +8,7 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/pmbus.h>
+#include <linux/regulator/driver.h>
 #include "pmbus.h"
 
 /*
@@ -33,11 +34,37 @@ static int pli1209bc_read_word_data(struct i2c_client *client, int page,
 			return data;
 		data = sign_extend32(data, 15) * 10;
 		return clamp_val(data, -32768, 32767) & 0xffff;
+	/*
+	 * PMBUS_READ_VOUT and PMBUS_READ_TEMPERATURE_1 return invalid data
+	 * when the BCM is turned off. Since it is not possible to return
+	 * ENODATA error, return zero instead.
+	 */
+	case PMBUS_READ_VOUT:
+	case PMBUS_READ_TEMPERATURE_1:
+		data = pmbus_read_word_data(client, page, phase,
+					    PMBUS_STATUS_WORD);
+		if (data < 0)
+			return data;
+		if (data & PB_STATUS_POWER_GOOD_N)
+			return 0;
+		return pmbus_read_word_data(client, page, phase, reg);
 	default:
 		return -ENODATA;
 	}
 }
 
+#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
+static const struct regulator_desc pli1209bc_reg_desc = {
+	.name = "vout2",
+	.id = 1,
+	.of_match = of_match_ptr("vout2"),
+	.regulators_node = of_match_ptr("regulators"),
+	.ops = &pmbus_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+};
+#endif
+
 static struct pmbus_driver_info pli1209bc_info = {
 	.pages = 2,
 	.format[PSC_VOLTAGE_IN] = direct,
@@ -75,6 +102,10 @@ static struct pmbus_driver_info pli1209bc_info = {
 	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
 	    | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT,
 	.read_word_data = pli1209bc_read_word_data,
+#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
+	.num_regulators = 1,
+	.reg_desc = &pli1209bc_reg_desc,
+#endif
 };
 
 static int pli1209bc_probe(struct i2c_client *client)
-- 
2.34.1

Re: [PATCH v4 4/4] pmbus (pli1209bc): Add regulator support

[Guenter Roeck]

On Mon, Feb 21, 2022 at 10:42:07AM +0100, Marcello Sylvester Bauer wrote:
> Add regulator support for PLI1209BC Digital Supervisor.
> 
> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>

Applied to hwmon-next.

Thanks,
Guenter

> ---
>  drivers/hwmon/pmbus/Kconfig     |  7 +++++++
>  drivers/hwmon/pmbus/pli1209bc.c | 31 +++++++++++++++++++++++++++++++
>  2 files changed, 38 insertions(+)
> 
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index f18f67a94697..6552467c588d 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -326,6 +326,13 @@ config SENSORS_PLI1209BC
>  	  This driver can also be built as a module. If so, the module will
>  	  be called pli1209bc.
>  
> +config SENSORS_PLI1209BC_REGULATOR
> +	bool "Regulator support for PLI1209BC"
> +	depends on SENSORS_PLI1209BC && REGULATOR
> +	help
> +	  If you say yes here you get regulator support for Vicor PLI1209BC
> +	  Digital Supervisor.
> +
>  config SENSORS_PM6764TR
>  	tristate "ST PM6764TR"
>  	help
> diff --git a/drivers/hwmon/pmbus/pli1209bc.c b/drivers/hwmon/pmbus/pli1209bc.c
> index 5f8847307e55..05b4ee35ba27 100644
> --- a/drivers/hwmon/pmbus/pli1209bc.c
> +++ b/drivers/hwmon/pmbus/pli1209bc.c
> @@ -8,6 +8,7 @@
>  #include <linux/i2c.h>
>  #include <linux/module.h>
>  #include <linux/pmbus.h>
> +#include <linux/regulator/driver.h>
>  #include "pmbus.h"
>  
>  /*
> @@ -33,11 +34,37 @@ static int pli1209bc_read_word_data(struct i2c_client *client, int page,
>  			return data;
>  		data = sign_extend32(data, 15) * 10;
>  		return clamp_val(data, -32768, 32767) & 0xffff;
> +	/*
> +	 * PMBUS_READ_VOUT and PMBUS_READ_TEMPERATURE_1 return invalid data
> +	 * when the BCM is turned off. Since it is not possible to return
> +	 * ENODATA error, return zero instead.
> +	 */
> +	case PMBUS_READ_VOUT:
> +	case PMBUS_READ_TEMPERATURE_1:
> +		data = pmbus_read_word_data(client, page, phase,
> +					    PMBUS_STATUS_WORD);
> +		if (data < 0)
> +			return data;
> +		if (data & PB_STATUS_POWER_GOOD_N)
> +			return 0;
> +		return pmbus_read_word_data(client, page, phase, reg);
>  	default:
>  		return -ENODATA;
>  	}
>  }
>  
> +#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
> +static const struct regulator_desc pli1209bc_reg_desc = {
> +	.name = "vout2",
> +	.id = 1,
> +	.of_match = of_match_ptr("vout2"),
> +	.regulators_node = of_match_ptr("regulators"),
> +	.ops = &pmbus_regulator_ops,
> +	.type = REGULATOR_VOLTAGE,
> +	.owner = THIS_MODULE,
> +};
> +#endif
> +
>  static struct pmbus_driver_info pli1209bc_info = {
>  	.pages = 2,
>  	.format[PSC_VOLTAGE_IN] = direct,
> @@ -75,6 +102,10 @@ static struct pmbus_driver_info pli1209bc_info = {
>  	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
>  	    | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT,
>  	.read_word_data = pli1209bc_read_word_data,
> +#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
> +	.num_regulators = 1,
> +	.reg_desc = &pli1209bc_reg_desc,
> +#endif
>  };
>  
>  static int pli1209bc_probe(struct i2c_client *client)