From: <Ryan.Wanner@microchip.com>
To: <robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
<nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<claudiu.beznea@tuxon.dev>, <lee@kernel.org>, <sre@kernel.org>,
<p.zabel@pengutronix.de>
Cc: <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>,
<linux-rtc@vger.kernel.org>,
Ryan Wanner <Ryan.Wanner@microchip.com>
Subject: [PATCH v4 00/11] Enable Power Modes Support for SAMA7D65 SoC
Date: Wed, 26 Mar 2025 08:35:33 -0700 [thread overview]
Message-ID: <cover.1742936082.git.Ryan.Wanner@microchip.com> (raw)
From: Ryan Wanner <Ryan.Wanner@microchip.com>
This patch set adds support for low power modes for the SAMA7D65 SoC and
the required components and changes for low power modes.
The series includes changes in the asm code to account for the addtional
clocks that are in this SoC.
The Device tree additions are to enable all the components needed to
keep the SoC in low power mode.
There are some DTB check warnings but that is due to the dt-binding not
in the correct .yaml file format.
Changes v1 -> v2:
- Add missing compatible for ddr3phy, it is now in both syscon sets.
- Fix alphabetical ordering for sama7d65.
- Remove the incorrect reorganizing patch.
- Remove sama7g5-rtt as a compatible for sama7d65-rtt and add
sama7d65-rtt as a compatible wake up source in the pm driver.
Changes from v2 -> v3:
- Correct mistake in v2 sfrbu dt-binding patch.
- Correct incorrect dt-binding addition and formatting for rtc and rtt bindings.
- Add missing SoB tag.
- Cleaned up commit message for Backup mode to describe SHDWC is status
register is cleared for this SoC.
- Cleaned up variable naming and usage for mcks. Changed the mcks number
to the correct number of clocks needed to be saved and corrected the
ASM code accordingly.
- Removed the SHDWC from ULP0 wake-up source as it is not configured as
a valid wake-up source for ULP0.
- Separated all the DTSI and DTS changes into individual patches.
Changes from v3 -> v4:
- Add sama7d65-gpbr to the dt-binding.
- Converted the sama5d2-secumod binding into yaml format.
- Add sama7d65-secumod to the new dt binding.
- Collect and remove applied and accpeted pathces from the set.
v1) https://lore.kernel.org/linux-arm-kernel/cover.1738257860.git.Ryan.Wanner@microchip.com/
v2) https://lore.kernel.org/linux-arm-kernel/cover.1739221064.git.Ryan.Wanner@microchip.com/
v3) https://lore.kernel.org/linux-arm-kernel/cover.1740671156.git.Ryan.Wanner@microchip.com/T/#m576233e7af84d68559afb286884c2b9294e7bc1d
Ryan Wanner (11):
dt-bindings: sram: Add microchip,sama7d65-sram
dt-bindings: power: reset: atmel,sama5d2-shdwc: Add
microchip,sama7d65-shdwc
dt-bindings: reset: atmel,at91sam9260-reset: add
microchip,sama7d65-rstc
dt-bindings: rtc: at91rm9200: add microchip,sama7d65-rtc
dt-bindings: at91rm9260-rtt: add microchip,sama7d65-rtt
dt-bindings: mfd: atmel: Add microchip,sama7d65-gpbr
dt-bindings: mfd: syscon: atmel,sama5d2-secumod: convert to yaml
dt-bindings: mfd: syscon: add microchip,sama7d65-secumod
ARM: dts: microchip: sama7d65: Add SRAM and DRAM components support
ARM: dts: microchip: sama7d65: Add RTT and GPBR Support for sama7d65
SoC
ARM: dts: microchip: sama7d65: Add RTT timer to curiosity board
.../bindings/arm/atmel,sama5d2-secumod.yaml | 49 +++++++++++++++++++
.../devicetree/bindings/arm/atmel-sysregs.txt | 25 ----------
.../bindings/mfd/atmel,at91sam9260-gpbr.yaml | 1 +
.../power/reset/atmel,sama5d2-shdwc.yaml | 5 ++
.../reset/atmel,at91sam9260-reset.yaml | 3 ++
.../bindings/rtc/atmel,at91rm9200-rtc.yaml | 4 +-
.../bindings/rtc/atmel,at91sam9260-rtt.yaml | 1 +
.../devicetree/bindings/sram/sram.yaml | 1 +
.../dts/microchip/at91-sama7d65_curiosity.dts | 4 ++
arch/arm/boot/dts/microchip/sama7d65.dtsi | 47 ++++++++++++++++++
10 files changed, 114 insertions(+), 26 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/atmel,sama5d2-secumod.yaml
--
2.43.0
next reply other threads:[~2025-03-26 15:36 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-26 15:35 Ryan.Wanner [this message]
2025-03-26 15:35 ` [PATCH v4 01/11] dt-bindings: sram: Add microchip,sama7d65-sram Ryan.Wanner
2025-03-26 15:35 ` [PATCH v4 02/11] dt-bindings: power: reset: atmel,sama5d2-shdwc: Add microchip,sama7d65-shdwc Ryan.Wanner
2025-03-26 15:35 ` [PATCH v4 03/11] dt-bindings: reset: atmel,at91sam9260-reset: add microchip,sama7d65-rstc Ryan.Wanner
2025-03-26 15:35 ` [PATCH v4 04/11] dt-bindings: rtc: at91rm9200: add microchip,sama7d65-rtc Ryan.Wanner
2025-03-26 15:35 ` [PATCH v4 05/11] dt-bindings: at91rm9260-rtt: add microchip,sama7d65-rtt Ryan.Wanner
2025-03-26 15:35 ` [PATCH v4 06/11] dt-bindings: mfd: atmel: Add microchip,sama7d65-gpbr Ryan.Wanner
2025-03-27 8:06 ` Krzysztof Kozlowski
2025-03-26 15:35 ` [PATCH v4 07/11] dt-bindings: mfd: syscon: atmel,sama5d2-secumod: convert to yaml Ryan.Wanner
2025-03-27 8:10 ` Krzysztof Kozlowski
2025-03-26 15:35 ` [PATCH v4 08/11] dt-bindings: mfd: syscon: add microchip,sama7d65-secumod Ryan.Wanner
2025-03-27 8:11 ` Krzysztof Kozlowski
2025-03-26 15:35 ` [PATCH v4 09/11] ARM: dts: microchip: sama7d65: Add SRAM and DRAM components support Ryan.Wanner
2025-03-26 15:35 ` [PATCH v4 10/11] ARM: dts: microchip: sama7d65: Add RTT and GPBR Support for sama7d65 SoC Ryan.Wanner
2025-03-26 15:35 ` [PATCH v4 11/11] ARM: dts: microchip: sama7d65: Add RTT timer to curiosity board Ryan.Wanner
2025-03-26 19:11 ` [PATCH v4 00/11] Enable Power Modes Support for SAMA7D65 SoC Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1742936082.git.Ryan.Wanner@microchip.com \
--to=ryan.wanner@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox