From: Stefano Radaelli <stefano.radaelli21@gmail.com>
To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: Stefano Radaelli <stefano.r@variscite.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Subject: [PATCH v1 00/11] arm64: dts: freescale: imx8mm-var-som: Align SOM and Symphony DTSs
Date: Tue, 17 Feb 2026 19:42:34 +0100 [thread overview]
Message-ID: <cover.1771353301.git.stefano.r@variscite.com> (raw)
This series aligns the i.MX8MM VAR-SOM and VAR-SOM Symphony device
trees with the latest hardware revisions.
The update consolidates the device tree descriptions to better reflect
the actual hardware partitioning between the SOM and the carrier board.
Nodes describing peripherals physically present on the SOM are kept in
the SOM dtsi, while carrier-specific components are described in the
corresponding carrier dts.
The changes were tested on the latest VAR-SOM and Symphony hardware
revision.
Stefano Radaelli (11):
arm64: dts: imx8mm-var-som: Move UART4 description to Symphony carrier
arm64: dts: freescale: imx8mm-var-som: Align fsl,pins tables
arm64: dts: freescale: imx8mm-var-som: Update FEC support with
MaxLinear PHY
arm64: dts: imx8mm-var-som: Add support for WM8904 audio codec
arm64: dts: freescale: imx8mm-var-som: Add MCP251xFD CAN controller
arm64: dts: freescale: imx8mm-var-som: Update WiFi/BT configuration
arm64: dts: imx8mm-var-som-symphony: Move USB configuration from SOM
arm64: dts: imx8mm-var-som-symphony: Enable uSD on USDHC2
arm64: dts: imx8mm-var-som-symphony: Add TPM2 support
arm64: dts: freescale: imx8mm-var-som-symphony: Enable I2C4
arm64: dts: imx8mm-var-som-symphony: Enable PCIe
.../dts/freescale/imx8mm-var-som-symphony.dts | 206 ++++++++-
.../boot/dts/freescale/imx8mm-var-som.dtsi | 420 ++++++++++++------
2 files changed, 474 insertions(+), 152 deletions(-)
base-commit: 37a93dd5c49b5fda807fd204edf2547c3493319c
--
2.47.3
next reply other threads:[~2026-02-17 18:43 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-17 18:42 Stefano Radaelli [this message]
2026-02-17 18:42 ` [PATCH v1 01/11] arm64: dts: imx8mm-var-som: Move UART4 description to Symphony carrier Stefano Radaelli
2026-02-17 18:42 ` [PATCH v1 02/11] arm64: dts: freescale: imx8mm-var-som: Align fsl,pins tables Stefano Radaelli
2026-02-17 18:42 ` [PATCH v1 03/11] arm64: dts: freescale: imx8mm-var-som: Update FEC support with MaxLinear PHY Stefano Radaelli
2026-02-17 18:54 ` Andrew Lunn
2026-02-17 19:31 ` Stefano Radaelli
2026-02-17 20:43 ` Andrew Lunn
2026-02-18 8:59 ` Stefano Radaelli
2026-02-18 13:23 ` Andrew Lunn
2026-02-18 14:59 ` Stefano Radaelli
2026-02-17 18:42 ` [PATCH v1 04/11] arm64: dts: imx8mm-var-som: Add support for WM8904 audio codec Stefano Radaelli
2026-02-17 18:42 ` [PATCH v1 05/11] arm64: dts: freescale: imx8mm-var-som: Add MCP251xFD CAN controller Stefano Radaelli
2026-02-17 18:42 ` [PATCH v1 06/11] arm64: dts: freescale: imx8mm-var-som: Update WiFi/BT configuration Stefano Radaelli
2026-02-17 18:59 ` Fabio Estevam
2026-02-17 19:42 ` Stefano Radaelli
2026-02-18 16:35 ` Frank Li
2026-02-18 17:18 ` Stefano Radaelli
2026-02-24 14:57 ` Stefano Radaelli
2026-02-24 21:30 ` Frank Li
2026-02-26 17:44 ` Stefano Radaelli
2026-02-26 20:29 ` Frank Li
2026-02-17 18:42 ` [PATCH v1 07/11] arm64: dts: imx8mm-var-som-symphony: Move USB configuration from SOM Stefano Radaelli
2026-02-17 18:42 ` [PATCH v1 08/11] arm64: dts: imx8mm-var-som-symphony: Enable uSD on USDHC2 Stefano Radaelli
2026-02-17 18:42 ` [PATCH v1 09/11] arm64: dts: imx8mm-var-som-symphony: Add TPM2 support Stefano Radaelli
2026-02-17 18:42 ` [PATCH v1 10/11] arm64: dts: freescale: imx8mm-var-som-symphony: Enable I2C4 Stefano Radaelli
2026-02-17 18:42 ` [PATCH v1 11/11] arm64: dts: imx8mm-var-som-symphony: Enable PCIe Stefano Radaelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1771353301.git.stefano.r@variscite.com \
--to=stefano.radaelli21@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=stefano.r@variscite.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox