From: Stefano Radaelli <stefano.radaelli21@gmail.com>
To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: pierluigi.p@variscite.com,
Stefano Radaelli <stefano.r@variscite.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Subject: [PATCH v2 00/11] arm64: dts: freescale: imx8mm-var-som: Align SOM and Symphony DTSs
Date: Fri, 6 Mar 2026 20:58:19 +0100 [thread overview]
Message-ID: <cover.1772826534.git.stefano.r@variscite.com> (raw)
This series aligns the i.MX8MM VAR-SOM and VAR-SOM Symphony device
trees with the latest hardware revisions.
The update consolidates the device tree descriptions to better reflect
the actual hardware partitioning between the SOM and the carrier board.
Nodes describing peripherals physically present on the SOM are kept in
the SOM dtsi, while carrier-specific components are described in the
corresponding carrier dts.
The changes were tested on the latest VAR-SOM and Symphony hardware
revision.
v1->v2:
- Moved phy LED configurations to symphony dts
- Added Wifi/BT dtsi variants for both iw61x and brcm legacy modules
Stefano Radaelli (11):
arm64: dts: freescale: imx8mm-var-som: Move UART4 description to
Symphony
arm64: dts: freescale: imx8mm-var-som: Align fsl,pins tables
arm64: dts: freescale: imx8mm-var-som: Update FEC support with
MaxLinear PHY
arm64: dts: freescale: imx8mm-var-som: Add support for WM8904 audio
codec
arm64: dts: freescale: imx8mm-var-som: Add MCP251xFD CAN controller
arm64: dts: freescale: imx8mm-var-som: Update WiFi/BT with variants
arm64: dts: imx8mm-var-som-symphony: Move USB configuration from SOM
arm64: dts: imx8mm-var-som-symphony: Enable uSD on USDHC2
arm64: dts: imx8mm-var-som-symphony: Add TPM2 support
arm64: dts: imx8mm-var-som-symphony: Enable I2C4
arm64: dts: imx8mm-var-som-symphony: Enable PCIe
.../dts/freescale/imx8mm-var-som-symphony.dts | 223 ++++++++++-
.../imx8mm-var-som-wifi-brcm-legacy.dtsi | 12 +
.../imx8mm-var-som-wifi-bt-iw61x.dtsi | 45 +++
.../boot/dts/freescale/imx8mm-var-som.dtsi | 366 ++++++++++++------
4 files changed, 501 insertions(+), 145 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-var-som-wifi-brcm-legacy.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-var-som-wifi-bt-iw61x.dtsi
base-commit: 37a93dd5c49b5fda807fd204edf2547c3493319c
--
2.47.3
next reply other threads:[~2026-03-06 19:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-06 19:58 Stefano Radaelli [this message]
2026-03-06 19:58 ` [PATCH v2 01/11] arm64: dts: freescale: imx8mm-var-som: Move UART4 description to Symphony Stefano Radaelli
2026-03-06 19:58 ` [PATCH v2 02/11] arm64: dts: freescale: imx8mm-var-som: Align fsl,pins tables Stefano Radaelli
2026-03-06 19:58 ` [PATCH v2 03/11] arm64: dts: freescale: imx8mm-var-som: Update FEC support with MaxLinear PHY Stefano Radaelli
2026-03-06 19:58 ` [PATCH v2 04/11] arm64: dts: freescale: imx8mm-var-som: Add support for WM8904 audio codec Stefano Radaelli
2026-03-06 19:58 ` [PATCH v2 05/11] arm64: dts: freescale: imx8mm-var-som: Add MCP251xFD CAN controller Stefano Radaelli
2026-03-06 19:58 ` [PATCH v2 06/11] arm64: dts: freescale: imx8mm-var-som: Update WiFi/BT with variants Stefano Radaelli
2026-03-06 19:58 ` [PATCH v2 07/11] arm64: dts: imx8mm-var-som-symphony: Move USB configuration from SOM Stefano Radaelli
2026-03-06 19:58 ` [PATCH v2 08/11] arm64: dts: imx8mm-var-som-symphony: Enable uSD on USDHC2 Stefano Radaelli
2026-03-06 19:58 ` [PATCH v2 09/11] arm64: dts: imx8mm-var-som-symphony: Add TPM2 support Stefano Radaelli
2026-03-06 19:58 ` [PATCH v2 10/11] arm64: dts: imx8mm-var-som-symphony: Enable I2C4 Stefano Radaelli
2026-03-06 19:58 ` [PATCH v2 11/11] arm64: dts: imx8mm-var-som-symphony: Enable PCIe Stefano Radaelli
2026-03-06 22:04 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1772826534.git.stefano.r@variscite.com \
--to=stefano.radaelli21@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pierluigi.p@variscite.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=stefano.r@variscite.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox