The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: tze.yee.ng@altera.com
To: Dinh Nguyen <dinguyen@kernel.org>,
	linux-kernel@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>,
	Jonathan Corbet <corbet@lwn.net>,
	Shuah Khan <skhan@linuxfoundation.org>,
	linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org
Subject: [PATCH v2 0/2] hwmon: add Altera SoC FPGA hardware monitoring support
Date: Mon, 29 Jun 2026 00:24:53 -0700	[thread overview]
Message-ID: <cover.1782715159.git.tze.yee.ng@altera.com> (raw)

From: Tze Yee Ng <tze.yee.ng@altera.com>

This series adds hardware monitor support for Altera SoC FPGA devices.
Temperature and voltage sensors are accessed through the Stratix 10
service layer and Secure Device Manager (SDM).

In v1, sensor channels were described in device tree under an
altr,stratix10-hwmon child node of the service layer. Review feedback
noted that this is not a discrete hardware block with its own resources,
and that a dedicated hwmon DT binding was not appropriate.

v2 removes all hwmon-related device tree bindings and DTS changes.
Instead, stratix10-svc registers a socfpga-hwmon platform device when
CONFIG_SENSORS_ALTERA_SOCFPGA_HWMON is enabled, similar to stratix10-rsu.
The hwmon driver binds by platform device name only and selects sensor
channels from hardcoded tables based on the parent service layer
compatible string (intel,stratix10-svc or intel,agilex-svc).

Patch 1 adds async HWMON SMC support to stratix10-svc and registers the
socfpga-hwmon platform device.

Patch 2 adds the socfpga-hwmon driver, documentation, Kconfig, and
MAINTAINERS entry.

Changes in v2:
- Drop altr,stratix10-hwmon DT binding and intel,stratix10-svc hwmon
  child property
- Drop Stratix 10 SoCDK DTS hwmon node
- Register socfpga-hwmon from stratix10-svc (RSU-style)
- Replace DT channel parsing with hardcoded Stratix 10 and Agilex tables
- Rename driver/module to socfpga-hwmon 
  (CONFIG_SENSORS_ALTERA_SOCFPGA_HWMON)
- Add Agilex channel support
- Fix SDM value conversion (Q8.8 degrees Celsius and Q16 volts to hwmon
  millidegrees/millivolts)
- Improve sync-mode error handling via last_err

Previous version:
  https://lore.kernel.org/all/cover.1781861409.git.tze.yee.ng@altera.com/

Tze Yee Ng (2):
  firmware: stratix10-svc: add async HWMON read commands and register
    socfpga-hwmon device
  hwmon: add Altera SoC FPGA hardware monitoring driver

 Documentation/hwmon/index.rst                |   1 +
 Documentation/hwmon/socfpga-hwmon.rst        |  34 ++
 MAINTAINERS                                  |   8 +
 drivers/firmware/stratix10-svc.c             |  46 +-
 drivers/hwmon/Kconfig                        |  10 +
 drivers/hwmon/Makefile                       |   1 +
 drivers/hwmon/socfpga-hwmon.c                | 596 +++++++++++++++++++
 include/linux/firmware/intel/stratix10-smc.h |  38 ++
 8 files changed, 731 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/hwmon/socfpga-hwmon.rst
 create mode 100644 drivers/hwmon/socfpga-hwmon.c

-- 
2.43.7


             reply	other threads:[~2026-06-29  7:25 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-29  7:24 tze.yee.ng [this message]
2026-06-29  7:24 ` [PATCH v2 1/2] firmware: stratix10-svc: add async HWMON read commands and register socfpga-hwmon device tze.yee.ng
2026-06-29  7:24 ` [PATCH v2 2/2] hwmon: add Altera SoC FPGA hardware monitoring driver tze.yee.ng
     [not found]   ` <20260629074245.2759D1F000E9@smtp.kernel.org>
2026-07-03  6:56     ` NG, TZE YEE
2026-07-01 14:07 ` [PATCH v2 0/2] hwmon: add Altera SoC FPGA hardware monitoring support Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cover.1782715159.git.tze.yee.ng@altera.com \
    --to=tze.yee.ng@altera.com \
    --cc=corbet@lwn.net \
    --cc=dinguyen@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=skhan@linuxfoundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox