From: tze.yee.ng@altera.com
To: Dinh Nguyen <dinguyen@kernel.org>,
linux-kernel@vger.kernel.org, Guenter Roeck <linux@roeck-us.net>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org
Subject: [PATCH v3 0/2] hwmon: add Altera SoC FPGA hardware monitoring support
Date: Fri, 3 Jul 2026 01:08:51 -0700 [thread overview]
Message-ID: <cover.1783062999.git.tze.yee.ng@altera.com> (raw)
From: Tze Yee Ng <tze.yee.ng@altera.com>
This series adds hardware monitor support for Altera SoC FPGA devices.
Temperature and voltage sensors are accessed through the Stratix 10
service layer and Secure Device Manager (SDM).
Patch 1 adds async HWMON SMC support to stratix10-svc and registers the
socfpga-hwmon platform device.
Patch 2 adds the socfpga-hwmon driver, documentation, Kconfig, and
MAINTAINERS entry.
Changes in v3:
- Address review feedback on socfpga-hwmon (Patch 2):
- Fix 16-bit Q8.8 temperature sign extension
- Drop unused async callback; pass NULL to stratix10_svc_async_send()
- Document and retain pre-poll wait (RSU pattern; firmware needs time
before async_poll())
- Align async poll retry behaviour with RSU
- Use uninterruptible wait_for_completion_timeout() for sync reads
- Handle -EINVAL and -EOPNOTSUPP when falling back to sync mode
- Defer SVC channel cleanup via devm_add_action_or_reset()
- No functional changes in Patch 1
Changes in v2:
- Drop altr,stratix10-hwmon DT binding and intel,stratix10-svc hwmon
child property
- Drop Stratix 10 SoCDK DTS hwmon node
- Register socfpga-hwmon from stratix10-svc (RSU-style)
- Replace DT channel parsing with hardcoded Stratix 10 and Agilex tables
- Rename driver/module to socfpga-hwmon
(CONFIG_SENSORS_ALTERA_SOCFPGA_HWMON)
- Add Agilex channel support
- Fix SDM value conversion (Q8.8 degrees Celsius and Q16 volts to hwmon
millidegrees/millivolts)
- Improve sync-mode error handling via last_err
Previous version:
https://lore.kernel.org/all/cover.1782715159.git.tze.yee.ng@altera.com/
Tze Yee Ng (2):
firmware: stratix10-svc: add async HWMON read commands and register
socfpga-hwmon device
hwmon: add Altera SoC FPGA hardware monitoring driver
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/socfpga-hwmon.rst | 34 ++
MAINTAINERS | 8 +
drivers/firmware/stratix10-svc.c | 46 +-
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/socfpga-hwmon.c | 596 +++++++++++++++++++
include/linux/firmware/intel/stratix10-smc.h | 38 ++
8 files changed, 731 insertions(+), 3 deletions(-)
create mode 100644 Documentation/hwmon/socfpga-hwmon.rst
create mode 100644 drivers/hwmon/socfpga-hwmon.c
--
2.43.7
next reply other threads:[~2026-07-03 8:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-03 8:08 tze.yee.ng [this message]
2026-07-03 8:08 ` [PATCH v3 1/2] firmware: stratix10-svc: add async HWMON read commands and register socfpga-hwmon device tze.yee.ng
2026-07-03 8:08 ` [PATCH v3 2/2] hwmon: add Altera SoC FPGA hardware monitoring driver tze.yee.ng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1783062999.git.tze.yee.ng@altera.com \
--to=tze.yee.ng@altera.com \
--cc=corbet@lwn.net \
--cc=dinguyen@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox