[PATCH v3 0/5] net/usb: asix driver improvements

[robert.foss@collabora.com]

From: Robert Foss <robert.foss@collabora.com>

This series improves power management of the asix driver.

 - Suspend/resume support is improved to save needed registers.
 - Device disconnection is improved.
 - Fixes AX88772x resume failures
 - Implementes IEEE 802.3 spec section "22.2.4.1.1 Reset" correctly
 - Fixes AX_CMD_WRITE_MEDIUM_MODE being set incorrectly

Changes since v1:
- Added proper metadata tags to series.
- Added two more patches to series.

Changes since v2:
- Added coverletter
- Tested patches on AX88772A/AX88772B/AX88178/AX88179 hardware

Allan Chou (1):
  net: asix: Fix AX88772x resume failures

Freddy Xin (1):
  net: asix: Add in_pm parameter

Grant Grundler (2):
  net: asix: see 802.3 spec for phy reset
  net: asix: autoneg will set WRITE_MEDIUM reg

Vincent Palatin (1):
  net: asix: Avoid looping when the device is disconnected

 drivers/net/usb/asix.h         |  40 ++-
 drivers/net/usb/asix_common.c  | 212 ++++++++++++----
 drivers/net/usb/asix_devices.c | 450 +++++++++++++++++++++++++++-------
 drivers/net/usb/ax88172a.c     |  29 +-
 4 files changed, 575 insertions(+), 156 deletions(-)

-- 
git-series 0.8.10