From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261762AbULUObA (ORCPT ); Tue, 21 Dec 2004 09:31:00 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261763AbULUObA (ORCPT ); Tue, 21 Dec 2004 09:31:00 -0500 Received: from main.gmane.org ([80.91.229.2]:12705 "EHLO main.gmane.org") by vger.kernel.org with ESMTP id S261762AbULUOao (ORCPT ); Tue, 21 Dec 2004 09:30:44 -0500 X-Injected-Via-Gmane: http://gmane.org/ To: linux-kernel@vger.kernel.org From: Ermanno Poggi Subject: aic7xxx boot error Date: Tue, 21 Dec 2004 15:27:51 +0100 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 8Bit X-Complaints-To: usenet@sea.gmane.org X-Gmane-NNTP-Posting-Host: host72-199.pool8248.interbusiness.it User-Agent: KNode/0.8.2 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello  From kernel 2.6.0, I've a problem with the aic7xxx driver (2.6.0-testXX was ok).  Until 2.6.7 I can solve this issue deleting the original aic7xxx directory in the kernel source and substitute this with the one downloaded from http://people.freebsd.org/~gibbs/linux/ !  From 2.6.7 I can't do this anymore, because I get some error compiling the kernel!  Can some one tell me if there is a solution, now I'm stuck with 2.6.7 and can't upgrade my kernel!    The only thing that I've noticed is the ACPI row before the detection of the aic7xxx, in the 2.6.X (where X>7) it could be an ACPI problem?? Obviously this problem prevent me to use any scsi device, with the new kernel    Thanks in advance    Bye bye    ---------kernel 2.6.9 with original aic7xxx driver------------    Zeus ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11  Zeus scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36  Zeus   Zeus aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs  Zeus  Zeus (scsi0:A:5): 20.000MB/s transfers (20.000MHz, offset 8)  Zeus scsi0:0:5:0: Attempting to queue an ABORT message  Zeus CDB: 0x12 0x0 0x0 0x0 0x24 0x0  Zeus scsi0: At time of recovery, card was not paused  Zeus >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<  Zeus scsi0: Dumping Card State in Data-in phase, at SEQADDR 0x7c  Zeus Card was paused  Zeus ACCUM = 0x0, SINDEX = 0xb8, DINDEX = 0xa8, ARG_2 = 0x0  Zeus HCNT = 0x20 SCBPTR = 0x0  Zeus SCSISIGI[0x44] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x40]  Zeus SCSISEQ[0x12] SBLKCTL[0x0] SCSIRATE[0x8] SEQCTL[0x10]  Zeus SEQ_FLAGS[0x20] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0x0]  Zeus SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0x80]  Zeus DFCNTRL[0x38] DFSTATUS[0x0]  Zeus STACK: 0x0 0x162 0x192 0x6e  Zeus SCB count = 4  Zeus Kernel NEXTQSCB = 2  Zeus Card NEXTQSCB = 2  Zeus QINFIFO entries:  Zeus Waiting Queue entries:  Zeus Disconnected Queue entries:  Zeus QOUTFIFO entries:  Zeus Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15  Zeus Sequencer SCB Info:  Zeus 0 SCB_CONTROL[0x0] SCB_SCSIID[0x57] SCB_LUN[0x0] SCB_TAG[0x3]  Zeus 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]  Zeus Pending list:  Zeus 3 SCB_CONTROL[0x0] SCB_SCSIID[0x57] SCB_LUN[0x0]  Zeus Kernel Free SCB list: 1 0  Zeus Untagged Q(5): 3  Zeus DevQ(0:5:0): 0 waiting  Zeus  Zeus <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>  Zeus scsi0:0:5:0: Device is active, asserting ATN  Zeus (scsi0:A:5:0): Abort Message Sent  Zeus Recovery code sleeping  Zeus (scsi0:A:5:0): SCB 3 - Abort Completed.  Zeus Recovery SCB completes  Zeus Recovery code awake  Zeus aic7xxx_abort returns 0x2002  Zeus (scsi0:A:5): 10.000MB/s transfers (10.000MHz, offset 8)  Zeus Vendor: PIONEER   Model: DVD-ROM DVD-303F  Rev: 2.00  Zeus Type:   CD-ROM                             ANSI SCSI revision: 02  Zeus sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray  Zeus Attached scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0  Zeus Attached scsi generic sg0 at scsi0, channel 0, id 5, lun 0,  type 5   ---------kernel 2.6.7 with Gibbs aic7xxx driver------------    Zeus scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.3.9  Zeus   Zeus aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs  Zeus  Zeus Vendor: PIONEER   Model: DVD-ROM DVD-303F  Rev: 2.00  Zeus Type:   CD-ROM                             ANSI SCSI revision: 02  Zeus sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray  Zeus Attached scsi CD-ROM sr0 at scsi0, channel 0, id 5, lun 0  Zeus Attached scsi generic sg0 at scsi0, channel 0, id 5, lun 0,  type 5