From: Gregory Moyer <raven2k@syphr.com>
To: linux-kernel@vger.kernel.org
Subject: Re: sata_nv times out for BD-ROM iHOS104-08
Date: Wed, 20 Jan 2010 22:15:56 -0500 [thread overview]
Message-ID: <d4fb20ca1001201915p59d3c9eal6014c22d449c46e6@mail.gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 795 bytes --]
> > Hmm.... it worked? Does kernel parameter sata_nv.adma_enabled=0 make
> > any difference? Can you please attach boot log with the kernel
> > parameter specified?
>
> Think you meant maybe sata_nv.swncq=0 instead - this is an MCP51
> controller so it doesn't support ADMA. I don't imagine SWNCQ would
> make any difference with an ATAPI device, but wouldn't hurt to try.
I tried booting 2.6.32 with both of these options (tried separately)
with no change in behavior. If it helps, sometimes I get an error mask
of 0x4 and sometimes 0x5, though I do not know what either represents.
Also, my controller is MCP55, but I don't know how different that is
from the MCP51 that Cengiz has.
Attached are boot logs from running each option suggested here.
Thanks again.
- Greg
[-- Attachment #2: boot.2.6.32.adma.disabled.log --]
[-- Type: text/x-log, Size: 47322 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-020632-generic (root@zinc) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #020632 SMP Thu Dec 3 10:09:58 UTC 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-020632-generic root=UUID=2e50af70-690f-48f4-a8e8-32472593f9d7 ro sata_nv.adma_enabled=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009b800 (usable)
[ 0.000000] modified: 000000000009b800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] modified: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] modified: 00000000d0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fef0000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fef0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fef0000 @ 10000-14000
[ 0.000000] RAMDISK: 377cc000 - 37fef7b0
[ 0.000000] ACPI: RSDP 00000000000f7fa0 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 000000007fef3040 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: FACP 000000007fef30c0 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: DSDT 000000007fef3180 0541D (v01 NVIDIA NVDAACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000007fef0000 00040
[ 0.000000] ACPI: HPET 000000007fef8700 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
[ 0.000000] ACPI: WDRT 000000007fef8780 00047 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: MCFG 000000007fef8840 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: APIC 000000007fef8600 00098 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fef0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fef0000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
[ 0.000000] bootmap [0000000000017000 - 0000000000026fdf] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fef0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a2f784] TEXT DATA BSS ==> [0001000000 - 0001a2f784]
[ 0.000000] #3 [00377cc000 - 0037fef7b0] RAMDISK ==> [00377cc000 - 0037fef7b0]
[ 0.000000] #4 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000]
[ 0.000000] #5 [0001a30000 - 0001a300b2] BRK ==> [0001a30000 - 0001a300b2]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000f3fd0] f3fd0
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0007fef0
[ 0.000000] On node 0 totalpages: 523899
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 105 pages reserved
[ 0.000000] DMA zone: 3818 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7109 pages used for memmap
[ 0.000000] DMA32 zone: 512811 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:50100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91288 r8192 d23400 u524288
[ 0.000000] pcpu-alloc: s91288 r8192 d23400 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516629
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-020632-generic root=UUID=2e50af70-690f-48f4-a8e8-32472593f9d7 ro sata_nv.adma_enabled=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2047508k/2096064k available (5355k kernel code, 468k absent, 48088k reserved, 3200k data, 728k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 20971520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2666.454 MHz processor.
[ 0.010008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.90 BogoMIPS (lpj=26664540)
[ 0.010232] Security Framework initialized
[ 0.010333] SELinux: Disabled at boot.
[ 0.010580] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012294] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.013061] Mount-cache hash table entries: 256
[ 0.013323] Initializing cgroup subsys ns
[ 0.013419] Initializing cgroup subsys cpuacct
[ 0.013515] Initializing cgroup subsys memory
[ 0.013615] Initializing cgroup subsys freezer
[ 0.013710] Initializing cgroup subsys net_cls
[ 0.013824] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.013964] CPU: L2 cache: 4096K
[ 0.014055] CPU 0/0x0 -> Node 0
[ 0.014144] CPU: Physical Processor ID: 0
[ 0.014237] CPU: Processor Core ID: 0
[ 0.014330] mce: CPU supports 6 MCE banks
[ 0.014428] CPU0: Thermal monitoring enabled (TM1)
[ 0.014528] using mwait in idle threads.
[ 0.014621] Performance Events: Core2 events, Intel PMU driver.
[ 0.014813] ... version: 2
[ 0.014906] ... bit width: 40
[ 0.014998] ... generic registers: 2
[ 0.015091] ... value mask: 000000ffffffffff
[ 0.015189] ... max period: 000000007fffffff
[ 0.015287] ... fixed-purpose events: 3
[ 0.015380] ... event mask: 0000000700000003
[ 0.017693] ACPI: Core revision 20090903
[ 0.026875] Setting APIC routing to flat
[ 0.027373] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.127489] CPU0: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07
[ 0.130000] Booting processor 1 APIC 0x3 ip 0x6000
[ 0.020000] Initializing CPU#1
[ 0.020000] Calibrating delay using timer specific routine.. 5333.35 BogoMIPS (lpj=26666750)
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 4096K
[ 0.020000] CPU 1/0x3 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 3
[ 0.020000] CPU1: Thermal monitoring enabled (TM1)
[ 0.280103] CPU1: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07
[ 0.281075] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.290098] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.020000] Initializing CPU#2
[ 0.020000] Calibrating delay using timer specific routine.. 5333.35 BogoMIPS (lpj=26666750)
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 4096K
[ 0.020000] CPU 2/0x1 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 1
[ 0.020000] CPU2: Thermal monitoring enabled (TM1)
[ 0.450118] CPU2: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07
[ 0.451090] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.460111] Booting processor 3 APIC 0x2 ip 0x6000
[ 0.020000] Initializing CPU#3
[ 0.020000] Calibrating delay using timer specific routine.. 5333.30 BogoMIPS (lpj=26666544)
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 4096K
[ 0.020000] CPU 3/0x2 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 2
[ 0.020000] CPU3: Thermal monitoring enabled (TM1)
[ 0.620048] CPU3: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07
[ 0.622431] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.630011] Brought up 4 CPUs
[ 0.630103] Total of 4 processors activated (21332.91 BogoMIPS).
[ 0.631657] CPU0 attaching sched-domain:
[ 0.631661] domain 0: span 0,2 level MC
[ 0.631663] groups: 0 2
[ 0.631667] domain 1: span 0-3 level CPU
[ 0.631668] groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048)
[ 0.631675] CPU1 attaching sched-domain:
[ 0.631677] domain 0: span 1,3 level MC
[ 0.631678] groups: 1 3
[ 0.631681] domain 1: span 0-3 level CPU
[ 0.631683] groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048)
[ 0.631688] CPU2 attaching sched-domain:
[ 0.631689] domain 0: span 0,2 level MC
[ 0.631691] groups: 2 0
[ 0.631694] domain 1: span 0-3 level CPU
[ 0.631696] groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048)
[ 0.631701] CPU3 attaching sched-domain:
[ 0.631702] domain 0: span 1,3 level MC
[ 0.631704] groups: 3 1
[ 0.631707] domain 1: span 0-3 level CPU
[ 0.631708] groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048)
[ 0.631851] regulator: core version 0.5
[ 0.631851] Time: 3:02:06 Date: 01/21/10
[ 0.631851] NET: Registered protocol family 16
[ 0.631851] ACPI: bus type pci registered
[ 0.631851] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.631851] PCI: MCFG area at e0000000 reserved in E820
[ 0.632976] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.633074] PCI: Using configuration type 1 for base access
[ 0.633808] bio: create slab <bio-0> at 0
[ 0.640076] ACPI: EC: Look up EC in DSDT
[ 0.646140] ACPI: Interpreter enabled
[ 0.646252] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.646584] ACPI: Using IOAPIC for interrupt routing
[ 0.646888] ACPI: BIOS _OSI(Linux) query ignored
[ 0.654045] ACPI: No dock devices found.
[ 0.654264] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.655172] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.655277] pci 0000:00:03.0: PME# disabled
[ 0.655554] pci 0000:00:0a.0: reg 10 io port: [0xfc00-0xfc7f]
[ 0.655603] pci 0000:00:0a.1: reg 10 io port: [0xf800-0xf83f]
[ 0.655618] pci 0000:00:0a.1: reg 20 io port: [0xf400-0xf43f]
[ 0.655623] pci 0000:00:0a.1: reg 24 io port: [0xf000-0xf03f]
[ 0.655646] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.655751] pci 0000:00:0a.1: PME# disabled
[ 0.655876] pci 0000:00:0b.0: reg 10 32bit mmio: [0xcffff000-0xcfffffff]
[ 0.655905] pci 0000:00:0b.0: supports D1 D2
[ 0.655907] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.656012] pci 0000:00:0b.0: PME# disabled
[ 0.656130] pci 0000:00:0b.1: reg 10 32bit mmio: [0xcfffe000-0xcfffe0ff]
[ 0.656162] pci 0000:00:0b.1: supports D1 D2
[ 0.656163] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.656269] pci 0000:00:0b.1: PME# disabled
[ 0.656401] pci 0000:00:0d.0: reg 20 io port: [0xec00-0xec0f]
[ 0.656443] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.656447] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.656452] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
[ 0.656456] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
[ 0.656460] pci 0000:00:0e.0: reg 20 io port: [0xd800-0xd80f]
[ 0.656465] pci 0000:00:0e.0: reg 24 32bit mmio: [0xcfffd000-0xcfffdfff]
[ 0.656512] pci 0000:00:0e.1: reg 10 io port: [0x9e0-0x9e7]
[ 0.656516] pci 0000:00:0e.1: reg 14 io port: [0xbe0-0xbe3]
[ 0.656521] pci 0000:00:0e.1: reg 18 io port: [0x960-0x967]
[ 0.656525] pci 0000:00:0e.1: reg 1c io port: [0xb60-0xb63]
[ 0.656529] pci 0000:00:0e.1: reg 20 io port: [0xc400-0xc40f]
[ 0.656533] pci 0000:00:0e.1: reg 24 32bit mmio: [0xcfffc000-0xcfffcfff]
[ 0.656581] pci 0000:00:0e.2: reg 10 io port: [0xc000-0xc007]
[ 0.656585] pci 0000:00:0e.2: reg 14 io port: [0xbc00-0xbc03]
[ 0.656589] pci 0000:00:0e.2: reg 18 io port: [0xb800-0xb807]
[ 0.656594] pci 0000:00:0e.2: reg 1c io port: [0xb400-0xb403]
[ 0.656598] pci 0000:00:0e.2: reg 20 io port: [0xb000-0xb00f]
[ 0.656602] pci 0000:00:0e.2: reg 24 32bit mmio: [0xcfffb000-0xcfffbfff]
[ 0.656699] pci 0000:00:0f.1: reg 10 32bit mmio: [0xcfff0000-0xcfff3fff]
[ 0.656734] pci 0000:00:0f.1: PME# supported from D3hot D3cold
[ 0.656837] pci 0000:00:0f.1: PME# disabled
[ 0.656977] pci 0000:00:11.0: reg 10 32bit mmio: [0xcfffa000-0xcfffafff]
[ 0.656981] pci 0000:00:11.0: reg 14 io port: [0xac00-0xac07]
[ 0.656986] pci 0000:00:11.0: reg 18 32bit mmio: [0xcfff9000-0xcfff90ff]
[ 0.656990] pci 0000:00:11.0: reg 1c 32bit mmio: [0xcfff8000-0xcfff800f]
[ 0.657020] pci 0000:00:11.0: supports D1 D2
[ 0.657022] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.657128] pci 0000:00:11.0: PME# disabled
[ 0.657261] pci 0000:00:12.0: reg 10 32bit mmio: [0xcfff7000-0xcfff7fff]
[ 0.657265] pci 0000:00:12.0: reg 14 io port: [0xa800-0xa807]
[ 0.657270] pci 0000:00:12.0: reg 18 32bit mmio: [0xcfff6000-0xcfff60ff]
[ 0.657274] pci 0000:00:12.0: reg 1c 32bit mmio: [0xcfff5000-0xcfff500f]
[ 0.657304] pci 0000:00:12.0: supports D1 D2
[ 0.657306] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.657412] pci 0000:00:12.0: PME# disabled
[ 0.657570] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.657675] pci 0000:00:18.0: PME# disabled
[ 0.657808] pci 0000:01:00.0: reg 10 32bit mmio: [0xcc000000-0xccffffff]
[ 0.657816] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xb0000000-0xbfffffff]
[ 0.657823] pci 0000:01:00.0: reg 1c 64bit mmio: [0xca000000-0xcbffffff]
[ 0.657827] pci 0000:01:00.0: reg 24 io port: [0x9c00-0x9c7f]
[ 0.657832] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.657892] pci 0000:00:03.0: bridge io port: [0x9000-0x9fff]
[ 0.657894] pci 0000:00:03.0: bridge 32bit mmio: [0xca000000-0xcdffffff]
[ 0.657898] pci 0000:00:03.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff]
[ 0.657933] pci 0000:02:07.0: reg 10 32bit mmio: [0xcfeff000-0xcfeff7ff]
[ 0.657939] pci 0000:02:07.0: reg 14 32bit mmio: [0xcfef8000-0xcfefbfff]
[ 0.657973] pci 0000:02:07.0: supports D1 D2
[ 0.657975] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.658078] pci 0000:02:07.0: PME# disabled
[ 0.658198] pci 0000:02:09.0: reg 10 io port: [0x8c00-0x8c1f]
[ 0.658234] pci 0000:02:09.0: supports D1 D2
[ 0.658263] pci 0000:00:0f.0: transparent bridge
[ 0.658359] pci 0000:00:0f.0: bridge io port: [0x8000-0x8fff]
[ 0.658362] pci 0000:00:0f.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff]
[ 0.658391] pci 0000:03:00.0: reg 10 32bit mmio: [0xc8000000-0xc8ffffff]
[ 0.658400] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xa0000000-0xafffffff]
[ 0.658408] pci 0000:03:00.0: reg 1c 64bit mmio: [0xc6000000-0xc7ffffff]
[ 0.658413] pci 0000:03:00.0: reg 24 io port: [0x7c00-0x7c7f]
[ 0.658418] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.658483] pci 0000:00:18.0: bridge io port: [0x7000-0x7fff]
[ 0.658486] pci 0000:00:18.0: bridge 32bit mmio: [0xc6000000-0xc9ffffff]
[ 0.658490] pci 0000:00:18.0: bridge 64bit mmio pref: [0xa0000000-0xafffffff]
[ 0.658502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.658816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.723799] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.724539] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[ 0.725153] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.725891] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
[ 0.726505] ACPI: PCI Interrupt Link [LXV5] (IRQs 5 7 9 *10 11 14 15)
[ 0.727118] ACPI: PCI Interrupt Link [LXV6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.727854] ACPI: PCI Interrupt Link [LXV7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.728590] ACPI: PCI Interrupt Link [LXV8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.729328] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.729942] ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15)
[ 0.730552] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[ 0.731172] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.731784] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.732544] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[ 0.733156] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.733903] ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 9 10 *11 14 15)
[ 0.734516] ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 9 *10 11 14 15)
[ 0.735134] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)
[ 0.735787] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.736254] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.736673] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.737139] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.737556] ACPI: PCI Interrupt Link [AXV5] (IRQs 16) *0
[ 0.737973] ACPI: PCI Interrupt Link [AXV6] (IRQs 16) *0, disabled.
[ 0.738439] ACPI: PCI Interrupt Link [AXV7] (IRQs 16) *0, disabled.
[ 0.738904] ACPI: PCI Interrupt Link [AXV8] (IRQs 16) *0, disabled.
[ 0.739370] ACPI: PCI Interrupt Link [AUBA] (IRQs 22 23) *0
[ 0.739833] ACPI: PCI Interrupt Link [AMA1] (IRQs 22 23) *0
[ 0.740266] ACPI: PCI Interrupt Link [AMAC] (IRQs 22 23) *0
[ 0.740730] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
[ 0.741192] ACPI: PCI Interrupt Link [AACI] (IRQs 22 23) *0, disabled.
[ 0.741703] ACPI: PCI Interrupt Link [AMCI] (IRQs 22 23) *0, disabled.
[ 0.742233] ACPI: PCI Interrupt Link [ASMB] (IRQs 22 23) *0, disabled.
[ 0.742744] ACPI: PCI Interrupt Link [AUS2] (IRQs 22 23) *0
[ 0.743227] ACPI: PCI Interrupt Link [AIDE] (IRQs 22 23) *0, disabled.
[ 0.743738] ACPI: PCI Interrupt Link [ASA0] (IRQs 20 21) *0
[ 0.744203] ACPI: PCI Interrupt Link [ASA1] (IRQs 20 21) *0
[ 0.744669] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21) *0
[ 0.745079] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.745224] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
[ 0.745365] vgaarb: loaded
[ 0.745536] SCSI subsystem initialized
[ 0.745661] libata version 3.00 loaded.
[ 0.745661] usbcore: registered new interface driver usbfs
[ 0.745661] usbcore: registered new interface driver hub
[ 0.745661] usbcore: registered new device driver usb
[ 0.745661] ACPI: WMI: Mapper loaded
[ 0.745661] PCI: Using ACPI for IRQ routing
[ 0.745661] Bluetooth: Core ver 2.15
[ 0.745661] NET: Registered protocol family 31
[ 0.745661] Bluetooth: HCI device and connection manager initialized
[ 0.745661] Bluetooth: HCI socket layer initialized
[ 0.745661] NetLabel: Initializing
[ 0.745661] NetLabel: domain hash size = 128
[ 0.745661] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.745661] NetLabel: unlabeled traffic allowed by default
[ 0.745661] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.745661] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.770008] Switching to clocksource tsc
[ 0.771728] pnp: PnP ACPI init
[ 0.771836] ACPI: bus type pnp registered
[ 0.775058] pnp: PnP ACPI: found 13 devices
[ 0.775153] ACPI: ACPI bus type pnp unregistered
[ 0.775256] system 00:00: ioport range 0x1000-0x107f has been reserved
[ 0.775360] system 00:00: ioport range 0x1080-0x10ff has been reserved
[ 0.775464] system 00:00: ioport range 0x1400-0x147f has been reserved
[ 0.775569] system 00:00: ioport range 0x1480-0x14ff has been reserved
[ 0.775673] system 00:00: ioport range 0x1800-0x187f has been reserved
[ 0.775777] system 00:00: ioport range 0x1880-0x18ff has been reserved
[ 0.775883] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.775987] system 00:02: ioport range 0x295-0x314 has been reserved
[ 0.776090] system 00:02: ioport range 0x880-0x88f has been reserved
[ 0.776200] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.776312] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved
[ 0.776416] system 00:0c: iomem range 0xd5800-0xd7fff has been reserved
[ 0.776531] system 00:0c: iomem range 0xf0000-0xfbfff could not be reserved
[ 0.776637] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.776743] system 00:0c: iomem range 0x7fef0000-0x7fefffff could not be reserved
[ 0.776883] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.776989] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.777094] system 00:0c: iomem range 0x100000-0x7feeffff could not be reserved
[ 0.777233] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.777373] system 00:0c: iomem range 0xd0000000-0xdfffffff has been reserved
[ 0.777480] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.777587] system 00:0c: iomem range 0xfeff0000-0xfeff0000 has been reserved
[ 0.782391] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[ 0.782493] pci 0000:00:03.0: IO window: 0x9000-0x9fff
[ 0.782593] pci 0000:00:03.0: MEM window: 0xca000000-0xcdffffff
[ 0.782696] pci 0000:00:03.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff
[ 0.782838] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:02
[ 0.782940] pci 0000:00:0f.0: IO window: 0x8000-0x8fff
[ 0.783040] pci 0000:00:0f.0: MEM window: 0xcfe00000-0xcfefffff
[ 0.783142] pci 0000:00:0f.0: PREFETCH window: disabled
[ 0.783243] pci 0000:00:18.0: PCI bridge, secondary bus 0000:03
[ 0.783344] pci 0000:00:18.0: IO window: 0x7000-0x7fff
[ 0.783444] pci 0000:00:18.0: MEM window: 0xc6000000-0xc9ffffff
[ 0.783547] pci 0000:00:18.0: PREFETCH window: 0x000000a0000000-0x000000afffffff
[ 0.783695] pci 0000:00:03.0: setting latency timer to 64
[ 0.783699] pci 0000:00:0f.0: setting latency timer to 64
[ 0.783705] pci 0000:00:18.0: setting latency timer to 64
[ 0.783709] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.783711] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.783713] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.783715] pci_bus 0000:01: resource 1 mem: [0xca000000-0xcdffffff]
[ 0.783717] pci_bus 0000:01: resource 2 pref mem [0xb0000000-0xbfffffff]
[ 0.783719] pci_bus 0000:02: resource 0 io: [0x8000-0x8fff]
[ 0.783721] pci_bus 0000:02: resource 1 mem: [0xcfe00000-0xcfefffff]
[ 0.783722] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.783724] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.783726] pci_bus 0000:03: resource 0 io: [0x7000-0x7fff]
[ 0.783728] pci_bus 0000:03: resource 1 mem: [0xc6000000-0xc9ffffff]
[ 0.783730] pci_bus 0000:03: resource 2 pref mem [0xa0000000-0xafffffff]
[ 0.783762] NET: Registered protocol family 2
[ 0.783968] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.784668] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.786428] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.787074] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.787178] TCP reno registered
[ 0.787402] NET: Registered protocol family 1
[ 0.809971] pci 0000:01:00.0: Boot video device
[ 0.810058] Trying to unpack rootfs image as initramfs...
[ 0.965719] Freeing initrd memory: 8333k freed
[ 0.971347] Scanning for low memory corruption every 60 seconds
[ 0.971618] audit: initializing netlink socket (disabled)
[ 0.971733] type=2000 audit(1264042925.967:1): initialized
[ 0.980142] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.981575] VFS: Disk quotas dquot_6.5.2
[ 0.981737] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.982356] fuse init (API version 7.13)
[ 0.982550] msgmni has been set to 4015
[ 0.983034] alg: No test for stdrng (krng)
[ 0.983148] io scheduler noop registered
[ 0.983246] io scheduler anticipatory registered
[ 0.983344] io scheduler deadline registered
[ 0.983487] io scheduler cfq registered (default)
[ 0.983711] alloc irq_desc for 24 on node -1
[ 0.983713] alloc kstat_irqs on node -1
[ 0.983722] pcieport 0000:00:03.0: irq 24 for MSI/MSI-X
[ 0.983727] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.983819] alloc irq_desc for 25 on node -1
[ 0.983820] alloc kstat_irqs on node -1
[ 0.983826] pcieport 0000:00:18.0: irq 25 for MSI/MSI-X
[ 0.983831] pcieport 0000:00:18.0: setting latency timer to 64
[ 0.983893] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.984011] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.984243] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.984388] ACPI: Power Button [PWRB]
[ 0.984532] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.984671] ACPI: Power Button [PWRF]
[ 0.985208] processor LNXCPU:00: registered as cooling_device0
[ 0.985357] processor LNXCPU:01: registered as cooling_device1
[ 0.986902] processor LNXCPU:02: registered as cooling_device2
[ 0.987034] processor LNXCPU:03: registered as cooling_device3
[ 0.990928] Linux agpgart interface v0.103
[ 0.991022] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.991220] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.991595] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.992488] brd: module loaded
[ 0.992930] loop: module loaded
[ 0.993077] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.993431] sata_nv 0000:00:0e.0: version 3.5
[ 0.993673] ACPI: PCI Interrupt Link [ASA0] enabled at IRQ 21
[ 0.993776] alloc irq_desc for 21 on node -1
[ 0.993778] alloc kstat_irqs on node -1
[ 0.993784] sata_nv 0000:00:0e.0: PCI INT A -> Link[ASA0] -> GSI 21 (level, low) -> IRQ 21
[ 0.993927] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 0.994253] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 0.994397] scsi0 : sata_nv
[ 0.994596] scsi1 : sata_nv
[ 0.994825] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
[ 0.994932] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
[ 0.995314] ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 20
[ 0.995415] alloc irq_desc for 20 on node -1
[ 0.995417] alloc kstat_irqs on node -1
[ 0.995420] sata_nv 0000:00:0e.1: PCI INT B -> Link[ASA1] -> GSI 20 (level, low) -> IRQ 20
[ 0.995563] sata_nv 0000:00:0e.1: Using SWNCQ mode
[ 0.995684] sata_nv 0000:00:0e.1: setting latency timer to 64
[ 0.995826] scsi2 : sata_nv
[ 0.996011] scsi3 : sata_nv
[ 0.996238] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20
[ 0.996345] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20
[ 0.996807] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[ 0.996909] sata_nv 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 0.997052] sata_nv 0000:00:0e.2: Using SWNCQ mode
[ 0.997176] sata_nv 0000:00:0e.2: setting latency timer to 64
[ 0.997304] scsi4 : sata_nv
[ 0.997488] scsi5 : sata_nv
[ 0.997722] ata5: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb000 irq 21
[ 0.997829] ata6: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xb008 irq 21
[ 0.998081] pata_amd 0000:00:0d.0: version 0.4.1
[ 0.998109] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 0.998206] scsi6 : pata_amd
[ 0.998392] scsi7 : pata_amd
[ 0.998943] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xec00 irq 14
[ 0.999049] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xec08 irq 15
[ 0.999269] ata7: port disabled. ignoring.
[ 0.999787] Fixed MDIO Bus: probed
[ 0.999904] PPP generic driver version 2.4.2
[ 1.000064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.000429] ACPI: PCI Interrupt Link [AUS2] enabled at IRQ 23
[ 1.000540] alloc irq_desc for 23 on node -1
[ 1.000542] alloc kstat_irqs on node -1
[ 1.000546] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[AUS2] -> GSI 23 (level, low) -> IRQ 23
[ 1.000694] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 1.000697] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 1.000830] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 1.000986] ehci_hcd 0000:00:0b.1: debug port 1
[ 1.001087] ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
[ 1.001099] ehci_hcd 0000:00:0b.1: irq 23, io mem 0xcfffe000
[ 1.030051] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 1.030244] usb usb1: configuration #1 chosen from 1 choice
[ 1.030376] hub 1-0:1.0: USB hub found
[ 1.030473] hub 1-0:1.0: 10 ports detected
[ 1.030616] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.030960] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 22
[ 1.031061] alloc irq_desc for 22 on node -1
[ 1.031062] alloc kstat_irqs on node -1
[ 1.031066] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[AUBA] -> GSI 22 (level, low) -> IRQ 22
[ 1.031215] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 1.031217] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 1.031359] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 1.031515] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xcffff000
[ 1.082177] usb usb2: configuration #1 chosen from 1 choice
[ 1.082295] hub 2-0:1.0: USB hub found
[ 1.082394] hub 2-0:1.0: 10 ports detected
[ 1.082539] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.082730] PNP: No PS/2 controller found. Probing ports directly.
[ 1.085452] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.085552] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.085734] mice: PS/2 mouse device common for all mice
[ 1.085896] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 1.086036] rtc_cmos 00:05: RTC can wake from S4
[ 1.086157] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.086286] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.086480] device-mapper: uevent: version 1.0.3
[ 1.086696] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.087084] device-mapper: multipath: version 1.1.0 loaded
[ 1.087194] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.087783] cpuidle: using governor ladder
[ 1.087898] cpuidle: using governor menu
[ 1.088301] TCP cubic registered
[ 1.088481] NET: Registered protocol family 10
[ 1.088970] lo: Disabled Privacy Extensions
[ 1.089314] NET: Registered protocol family 17
[ 1.089422] Bluetooth: L2CAP ver 2.14
[ 1.089513] Bluetooth: L2CAP socket layer initialized
[ 1.089611] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.089706] Bluetooth: SCO socket layer initialized
[ 1.089870] Bluetooth: RFCOMM TTY layer initialized
[ 1.089981] Bluetooth: RFCOMM socket layer initialized
[ 1.090083] Bluetooth: RFCOMM ver 1.11
[ 1.090268] PM: Resume from disk failed.
[ 1.090287] registered taskstats version 1
[ 1.090776] Magic number: 10:821:7
[ 1.090941] rtc_cmos 00:05: setting system clock to 2010-01-21 03:02:06 UTC (1264042926)
[ 1.091094] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.091195] EDD information not available.
[ 1.333101] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.400043] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 1.480076] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.492554] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.502797] ata3.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
[ 1.502906] ata3.00: applying bridge limits
[ 1.503274] ata5.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
[ 1.503385] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.540202] ata3.00: configured for UDMA/33
[ 1.550405] ata5.00: configured for UDMA/133
[ 1.670538] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.671640] scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
[ 1.678541] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.678685] Uniform CD-ROM driver Revision: 3.20
[ 1.678857] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.678889] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 1.740037] usb 2-5: new low speed USB device using ohci_hcd and address 2
[ 1.968265] usb 2-5: configuration #1 chosen from 1 choice
[ 2.160147] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.180165] ata4.00: ATAPI: ATAPI iHOS104, WL0B, max UDMA/100
[ 2.220176] ata4.00: configured for UDMA/100
[ 3.340035] usb 2-6: new full speed USB device using ohci_hcd and address 3
[ 3.577376] usb 2-6: configuration #1 chosen from 1 choice
[ 7.220071] ata4.00: qc timeout (cmd 0xa0)
[ 7.220170] ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 7.710065] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.770176] ata4.00: configured for UDMA/100
[ 12.770056] ata4.00: qc timeout (cmd 0xa0)
[ 12.770154] ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 12.770258] ata4: limiting SATA link speed to 1.5 Gbps
[ 12.770357] ata4.00: limiting speed to UDMA/100:PIO3
[ 13.260064] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 13.320176] ata4.00: configured for UDMA/100
[ 18.320078] ata4.00: qc timeout (cmd 0xa0)
[ 18.320177] ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 18.320280] ata4.00: disabled
[ 18.320387] ata4: hard resetting link
[ 18.320478] ata4: nv: skipping hardreset on occupied port
[ 18.810064] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 18.810175] ata4: EH complete
[ 18.810408] scsi 4:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
[ 18.810662] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 18.810831] sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 18.811007] sd 4:0:0:0: [sda] Write Protect is off
[ 18.811104] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.811124] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.811373] sda: sda1
[ 18.821698] sd 4:0:0:0: [sda] Attached SCSI disk
[ 19.300065] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 19.359025] ata6.00: ATA-7: ST3320620AS, 3.AAD, max UDMA/133
[ 19.359130] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 19.442328] ata6.00: configured for UDMA/133
[ 19.442530] scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 19.442839] sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 19.442858] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 19.442980] ata8: port disabled. ignoring.
[ 19.443138] sd 5:0:0:0: [sdb] Write Protect is off
[ 19.443235] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 19.443254] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.443494] sdb: sdb1 sdb2 < sdb5 >
[ 19.502615] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 19.502753] Freeing unused kernel memory: 728k freed
[ 19.503174] Write protecting the kernel read-only data: 7792k
[ 19.617921] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 19.628019] FDC 0 is a post-1991 82077
[ 19.633878] ACPI: PCI Interrupt Link [AMAC] enabled at IRQ 23
[ 19.633992] forcedeth 0000:00:11.0: PCI INT A -> Link[AMAC] -> GSI 23 (level, low) -> IRQ 23
[ 19.634143] forcedeth 0000:00:11.0: setting latency timer to 64
[ 19.634229] nv_probe: set workaround bit for reversed mac addr
[ 19.642594] usbcore: registered new interface driver hiddev
[ 19.644913] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 19.645019] alloc irq_desc for 19 on node -1
[ 19.645021] alloc kstat_irqs on node -1
[ 19.645027] ohci1394 0000:02:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 19.649791] input: Ideazon Zboard Gaming Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.0/input/input3
[ 19.649997] generic-usb 0003:1038:0210.0001: input,hidraw0: USB HID v1.11 Keyboard [Ideazon Zboard Gaming Keyboard] on usb-0000:00:0b.0-5/input0
[ 19.663513] input: Ideazon Zboard Gaming Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/input/input4
[ 19.665305] generic-usb 0003:1038:0210.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Ideazon Zboard Gaming Keyboard] on usb-0000:00:0b.0-5/input1
[ 19.674574] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6:1.0/input/input5
[ 19.674891] generic-usb 0003:1532:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:0b.0-6/input0
[ 19.680781] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6:1.1/input/input6
[ 19.681022] generic-usb 0003:1532:0101.0004: input,hidraw3: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:0b.0-6/input1
[ 19.681206] usbcore: registered new interface driver usbhid
[ 19.681333] usbhid: v2.6:USB HID core driver
[ 19.710109] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[cfeff000-cfeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 20.170793] forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:04:4b:05:cb:6c
[ 20.170939] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 20.171381] ACPI: PCI Interrupt Link [AMA1] enabled at IRQ 22
[ 20.171484] forcedeth 0000:00:12.0: PCI INT A -> Link[AMA1] -> GSI 22 (level, low) -> IRQ 22
[ 20.171630] forcedeth 0000:00:12.0: setting latency timer to 64
[ 20.171671] nv_probe: set workaround bit for reversed mac addr
[ 20.710814] forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x5043 @ 2, addr 00:04:4b:05:cb:6d
[ 20.710959] forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 20.912561] PM: Starting manual resume from disk
[ 20.912660] PM: Resume from partition 8:21
[ 20.912661] PM: Checking hibernation image.
[ 20.912831] PM: Error -22 checking image file
[ 20.912834] PM: Resume from disk failed.
[ 20.957919] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[ 21.033993] ieee1394: Host added: ID:BUS[0-00:1023] GUID[1aa25f0500044b06]
[ 35.717547] udev: starting version 147
[ 35.793302] Adding 6024332k swap on /dev/sdb5. Priority:-1 extents:1 across:6024332k
[ 36.389181] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 36.389748] lp: driver loaded but no devices found
[ 36.836983] nvidia: module license 'NVIDIA' taints kernel.
[ 36.836987] Disabling lock debugging due to kernel taint
[ 36.946291] alloc irq_desc for 26 on node -1
[ 36.946293] alloc kstat_irqs on node -1
[ 36.946302] forcedeth 0000:00:11.0: irq 26 for MSI/MSI-X
[ 36.946493] eth0: no link during initialization.
[ 36.947077] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.069628] i2c i2c-0: nForce2 SMBus adapter at 0xf400
[ 37.069680] i2c i2c-1: nForce2 SMBus adapter at 0xf000
[ 37.305950] ACPI: PCI Interrupt Link [AXV5] enabled at IRQ 16
[ 37.305955] alloc irq_desc for 16 on node -1
[ 37.305957] alloc kstat_irqs on node -1
[ 37.305964] nvidia 0000:01:00.0: PCI INT A -> Link[AXV5] -> GSI 16 (level, low) -> IRQ 16
[ 37.305970] nvidia 0000:01:00.0: setting latency timer to 64
[ 37.306095] nvidia 0000:03:00.0: enabling device (0000 -> 0003)
[ 37.306100] nvidia 0000:03:00.0: PCI INT A -> Link[AXV5] -> GSI 16 (level, low) -> IRQ 16
[ 37.306105] nvidia 0000:03:00.0: setting latency timer to 64
[ 37.306328] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009
[ 37.355499] alloc irq_desc for 27 on node -1
[ 37.355503] alloc kstat_irqs on node -1
[ 37.355511] forcedeth 0000:00:12.0: irq 27 for MSI/MSI-X
[ 37.868744] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 37.868754] alloc irq_desc for 17 on node -1
[ 37.868757] alloc kstat_irqs on node -1
[ 37.868765] CA0106 0000:02:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 37.868795] snd-ca0106: Model 1011 Rev 00000000 Serial 10111102
[ 37.919784] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 37.919790] HDA Intel 0000:00:0f.1: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
[ 37.919812] HDA Intel 0000:00:0f.1: setting latency timer to 64
[ 39.313897] hda_codec: ALC889A: BIOS auto-probing.
[ 39.930353] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.1/input/input7
[ 40.451592] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 40.451597] vboxdrv: Successfully done.
[ 40.451599] vboxdrv: Found 4 processor cores.
[ 40.451951] VBoxDrv: dbg - g_abExecMemory=ffffffffa0cae460
[ 40.452063] vboxdrv: fAsync=0 offMin=0x4d8 offMax=0x904c
[ 40.452470] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 40.452472] vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000).
[ 40.657930] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0e4c260
[ 40.660228] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa0e64b00
[ 40.835606] Bridge firewalling registered
[ 40.842382] device eth0 entered promiscuous mode
[ 40.842978] virbr0: starting userspace STP failed, starting kernel STP
[ 40.848310] ppdev: user-space parallel port driver
[ 40.943194] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 40.943742] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 40.943745] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 40.943746] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 41.754059] lo: Disabled Privacy Extensions
[ 42.564751] RPC: Registered udp transport module.
[ 42.564755] RPC: Registered tcp transport module.
[ 42.564756] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 42.702798] svc: failed to register lockdv1 RPC service (errno 97).
[ 48.230183] eth1: no IPv6 routers present
[ 51.582531] br0: no IPv6 routers present
[-- Attachment #3: boot.2.6.32.swncq.disabled.log --]
[-- Type: text/x-log, Size: 47370 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-020632-generic (root@zinc) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #020632 SMP Thu Dec 3 10:09:58 UTC 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-020632-generic root=UUID=2e50af70-690f-48f4-a8e8-32472593f9d7 ro sata_nv.swncq=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CBFFF write-protect
[ 0.000000] CC000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009b800 (usable)
[ 0.000000] modified: 000000000009b800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] modified: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] modified: 00000000d0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fef0000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fef0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fef0000 @ 10000-14000
[ 0.000000] RAMDISK: 377cc000 - 37fef7b0
[ 0.000000] ACPI: RSDP 00000000000f7fa0 00014 (v00 Nvidia)
[ 0.000000] ACPI: RSDT 000000007fef3040 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: FACP 000000007fef30c0 00074 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: DSDT 000000007fef3180 0541D (v01 NVIDIA NVDAACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000007fef0000 00040
[ 0.000000] ACPI: HPET 000000007fef8700 00038 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000098)
[ 0.000000] ACPI: WDRT 000000007fef8780 00047 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: MCFG 000000007fef8840 0003C (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: APIC 000000007fef8600 00098 (v01 Nvidia NVDAACPI 42302E31 NVDA 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007fef0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fef0000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
[ 0.000000] bootmap [0000000000017000 - 0000000000026fdf] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fef0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a2f784] TEXT DATA BSS ==> [0001000000 - 0001a2f784]
[ 0.000000] #3 [00377cc000 - 0037fef7b0] RAMDISK ==> [00377cc000 - 0037fef7b0]
[ 0.000000] #4 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000]
[ 0.000000] #5 [0001a30000 - 0001a300b2] BRK ==> [0001a30000 - 0001a300b2]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000f3fd0] f3fd0
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x0007fef0
[ 0.000000] On node 0 totalpages: 523899
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 105 pages reserved
[ 0.000000] DMA zone: 3818 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7109 pages used for memmap
[ 0.000000] DMA32 zone: 512811 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:50100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91288 r8192 d23400 u524288
[ 0.000000] pcpu-alloc: s91288 r8192 d23400 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516629
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-020632-generic root=UUID=2e50af70-690f-48f4-a8e8-32472593f9d7 ro sata_nv.swncq=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2047508k/2096064k available (5355k kernel code, 468k absent, 48088k reserved, 3200k data, 728k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 20971520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2666.461 MHz processor.
[ 0.010008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.92 BogoMIPS (lpj=26664610)
[ 0.010232] Security Framework initialized
[ 0.010333] SELinux: Disabled at boot.
[ 0.010580] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012289] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.013057] Mount-cache hash table entries: 256
[ 0.013316] Initializing cgroup subsys ns
[ 0.013412] Initializing cgroup subsys cpuacct
[ 0.013509] Initializing cgroup subsys memory
[ 0.013609] Initializing cgroup subsys freezer
[ 0.013704] Initializing cgroup subsys net_cls
[ 0.013818] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.013958] CPU: L2 cache: 4096K
[ 0.014049] CPU 0/0x0 -> Node 0
[ 0.014138] CPU: Physical Processor ID: 0
[ 0.014231] CPU: Processor Core ID: 0
[ 0.014324] mce: CPU supports 6 MCE banks
[ 0.014422] CPU0: Thermal monitoring enabled (TM1)
[ 0.014521] using mwait in idle threads.
[ 0.014613] Performance Events: Core2 events, Intel PMU driver.
[ 0.014805] ... version: 2
[ 0.014898] ... bit width: 40
[ 0.014990] ... generic registers: 2
[ 0.015083] ... value mask: 000000ffffffffff
[ 0.015181] ... max period: 000000007fffffff
[ 0.015279] ... fixed-purpose events: 3
[ 0.015371] ... event mask: 0000000700000003
[ 0.017684] ACPI: Core revision 20090903
[ 0.026870] Setting APIC routing to flat
[ 0.027366] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.127484] CPU0: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07
[ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.020000] Initializing CPU#1
[ 0.020000] Calibrating delay using timer specific routine.. 5333.32 BogoMIPS (lpj=26666644)
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 4096K
[ 0.020000] CPU 1/0x1 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 1
[ 0.020000] CPU1: Thermal monitoring enabled (TM1)
[ 0.280118] CPU1: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07
[ 0.281089] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.290113] Booting processor 2 APIC 0x3 ip 0x6000
[ 0.020000] Initializing CPU#2
[ 0.020000] Calibrating delay using timer specific routine.. 5333.29 BogoMIPS (lpj=26666472)
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 4096K
[ 0.020000] CPU 2/0x3 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 3
[ 0.020000] CPU2: Thermal monitoring enabled (TM1)
[ 0.450055] CPU2: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07
[ 0.451027] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.460081] Booting processor 3 APIC 0x2 ip 0x6000
[ 0.020000] Initializing CPU#3
[ 0.020000] Calibrating delay using timer specific routine.. 5333.28 BogoMIPS (lpj=26666432)
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 4096K
[ 0.020000] CPU 3/0x2 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 2
[ 0.020000] CPU3: Thermal monitoring enabled (TM1)
[ 0.620052] CPU3: Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping 07
[ 0.622432] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.630011] Brought up 4 CPUs
[ 0.630103] Total of 4 processors activated (21332.83 BogoMIPS).
[ 0.631660] CPU0 attaching sched-domain:
[ 0.631663] domain 0: span 0-1 level MC
[ 0.631665] groups: 0 1
[ 0.631669] domain 1: span 0-3 level CPU
[ 0.631671] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.631677] CPU1 attaching sched-domain:
[ 0.631679] domain 0: span 0-1 level MC
[ 0.631680] groups: 1 0
[ 0.631683] domain 1: span 0-3 level CPU
[ 0.631685] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
[ 0.631690] CPU2 attaching sched-domain:
[ 0.631692] domain 0: span 2-3 level MC
[ 0.631693] groups: 2 3
[ 0.631696] domain 1: span 0-3 level CPU
[ 0.631698] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.631703] CPU3 attaching sched-domain:
[ 0.631704] domain 0: span 2-3 level MC
[ 0.631706] groups: 3 2
[ 0.631709] domain 1: span 0-3 level CPU
[ 0.631710] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
[ 0.631852] regulator: core version 0.5
[ 0.631852] Time: 2:51:46 Date: 01/21/10
[ 0.631852] NET: Registered protocol family 16
[ 0.631852] ACPI: bus type pci registered
[ 0.631852] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.631852] PCI: MCFG area at e0000000 reserved in E820
[ 0.632975] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.633072] PCI: Using configuration type 1 for base access
[ 0.633806] bio: create slab <bio-0> at 0
[ 0.640070] ACPI: EC: Look up EC in DSDT
[ 0.646125] ACPI: Interpreter enabled
[ 0.646238] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.646571] ACPI: Using IOAPIC for interrupt routing
[ 0.646873] ACPI: BIOS _OSI(Linux) query ignored
[ 0.654035] ACPI: No dock devices found.
[ 0.654254] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.655162] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.655267] pci 0000:00:03.0: PME# disabled
[ 0.655544] pci 0000:00:0a.0: reg 10 io port: [0xfc00-0xfc7f]
[ 0.655593] pci 0000:00:0a.1: reg 10 io port: [0xf800-0xf83f]
[ 0.655608] pci 0000:00:0a.1: reg 20 io port: [0xf400-0xf43f]
[ 0.655613] pci 0000:00:0a.1: reg 24 io port: [0xf000-0xf03f]
[ 0.655636] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.655741] pci 0000:00:0a.1: PME# disabled
[ 0.655865] pci 0000:00:0b.0: reg 10 32bit mmio: [0xcffff000-0xcfffffff]
[ 0.655895] pci 0000:00:0b.0: supports D1 D2
[ 0.655896] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.656002] pci 0000:00:0b.0: PME# disabled
[ 0.656120] pci 0000:00:0b.1: reg 10 32bit mmio: [0xcfffe000-0xcfffe0ff]
[ 0.656151] pci 0000:00:0b.1: supports D1 D2
[ 0.656153] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.656258] pci 0000:00:0b.1: PME# disabled
[ 0.656390] pci 0000:00:0d.0: reg 20 io port: [0xec00-0xec0f]
[ 0.656433] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.656437] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.656441] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977]
[ 0.656445] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73]
[ 0.656450] pci 0000:00:0e.0: reg 20 io port: [0xd800-0xd80f]
[ 0.656454] pci 0000:00:0e.0: reg 24 32bit mmio: [0xcfffd000-0xcfffdfff]
[ 0.656501] pci 0000:00:0e.1: reg 10 io port: [0x9e0-0x9e7]
[ 0.656506] pci 0000:00:0e.1: reg 14 io port: [0xbe0-0xbe3]
[ 0.656510] pci 0000:00:0e.1: reg 18 io port: [0x960-0x967]
[ 0.656514] pci 0000:00:0e.1: reg 1c io port: [0xb60-0xb63]
[ 0.656518] pci 0000:00:0e.1: reg 20 io port: [0xc400-0xc40f]
[ 0.656523] pci 0000:00:0e.1: reg 24 32bit mmio: [0xcfffc000-0xcfffcfff]
[ 0.656570] pci 0000:00:0e.2: reg 10 io port: [0xc000-0xc007]
[ 0.656574] pci 0000:00:0e.2: reg 14 io port: [0xbc00-0xbc03]
[ 0.656579] pci 0000:00:0e.2: reg 18 io port: [0xb800-0xb807]
[ 0.656583] pci 0000:00:0e.2: reg 1c io port: [0xb400-0xb403]
[ 0.656587] pci 0000:00:0e.2: reg 20 io port: [0xb000-0xb00f]
[ 0.656592] pci 0000:00:0e.2: reg 24 32bit mmio: [0xcfffb000-0xcfffbfff]
[ 0.656689] pci 0000:00:0f.1: reg 10 32bit mmio: [0xcfff0000-0xcfff3fff]
[ 0.656723] pci 0000:00:0f.1: PME# supported from D3hot D3cold
[ 0.656826] pci 0000:00:0f.1: PME# disabled
[ 0.656966] pci 0000:00:11.0: reg 10 32bit mmio: [0xcfffa000-0xcfffafff]
[ 0.656970] pci 0000:00:11.0: reg 14 io port: [0xac00-0xac07]
[ 0.656975] pci 0000:00:11.0: reg 18 32bit mmio: [0xcfff9000-0xcfff90ff]
[ 0.656979] pci 0000:00:11.0: reg 1c 32bit mmio: [0xcfff8000-0xcfff800f]
[ 0.657009] pci 0000:00:11.0: supports D1 D2
[ 0.657011] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.657117] pci 0000:00:11.0: PME# disabled
[ 0.657250] pci 0000:00:12.0: reg 10 32bit mmio: [0xcfff7000-0xcfff7fff]
[ 0.657255] pci 0000:00:12.0: reg 14 io port: [0xa800-0xa807]
[ 0.657259] pci 0000:00:12.0: reg 18 32bit mmio: [0xcfff6000-0xcfff60ff]
[ 0.657264] pci 0000:00:12.0: reg 1c 32bit mmio: [0xcfff5000-0xcfff500f]
[ 0.657294] pci 0000:00:12.0: supports D1 D2
[ 0.657296] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.657402] pci 0000:00:12.0: PME# disabled
[ 0.657560] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.657665] pci 0000:00:18.0: PME# disabled
[ 0.657798] pci 0000:01:00.0: reg 10 32bit mmio: [0xcc000000-0xccffffff]
[ 0.657806] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xb0000000-0xbfffffff]
[ 0.657813] pci 0000:01:00.0: reg 1c 64bit mmio: [0xca000000-0xcbffffff]
[ 0.657818] pci 0000:01:00.0: reg 24 io port: [0x9c00-0x9c7f]
[ 0.657822] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.657882] pci 0000:00:03.0: bridge io port: [0x9000-0x9fff]
[ 0.657884] pci 0000:00:03.0: bridge 32bit mmio: [0xca000000-0xcdffffff]
[ 0.657888] pci 0000:00:03.0: bridge 64bit mmio pref: [0xb0000000-0xbfffffff]
[ 0.657923] pci 0000:02:07.0: reg 10 32bit mmio: [0xcfeff000-0xcfeff7ff]
[ 0.657929] pci 0000:02:07.0: reg 14 32bit mmio: [0xcfef8000-0xcfefbfff]
[ 0.657964] pci 0000:02:07.0: supports D1 D2
[ 0.657965] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot
[ 0.658068] pci 0000:02:07.0: PME# disabled
[ 0.658188] pci 0000:02:09.0: reg 10 io port: [0x8c00-0x8c1f]
[ 0.658224] pci 0000:02:09.0: supports D1 D2
[ 0.658253] pci 0000:00:0f.0: transparent bridge
[ 0.658349] pci 0000:00:0f.0: bridge io port: [0x8000-0x8fff]
[ 0.658352] pci 0000:00:0f.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff]
[ 0.658381] pci 0000:03:00.0: reg 10 32bit mmio: [0xc8000000-0xc8ffffff]
[ 0.658390] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xa0000000-0xafffffff]
[ 0.658398] pci 0000:03:00.0: reg 1c 64bit mmio: [0xc6000000-0xc7ffffff]
[ 0.658403] pci 0000:03:00.0: reg 24 io port: [0x7c00-0x7c7f]
[ 0.658408] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.658473] pci 0000:00:18.0: bridge io port: [0x7000-0x7fff]
[ 0.658476] pci 0000:00:18.0: bridge 32bit mmio: [0xc6000000-0xc9ffffff]
[ 0.658480] pci 0000:00:18.0: bridge 64bit mmio pref: [0xa0000000-0xafffffff]
[ 0.658492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.658805] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.723767] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.724507] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[ 0.725120] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.725859] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
[ 0.726473] ACPI: PCI Interrupt Link [LXV5] (IRQs 5 7 9 *10 11 14 15)
[ 0.727086] ACPI: PCI Interrupt Link [LXV6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.727823] ACPI: PCI Interrupt Link [LXV7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.728559] ACPI: PCI Interrupt Link [LXV8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.729297] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.729911] ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15)
[ 0.730507] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[ 0.731128] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.731740] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.732485] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[ 0.733099] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.733848] ACPI: PCI Interrupt Link [LSA0] (IRQs 5 7 9 10 *11 14 15)
[ 0.734461] ACPI: PCI Interrupt Link [LSA1] (IRQs 5 7 9 *10 11 14 15)
[ 0.735080] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)
[ 0.735734] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.736202] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.736619] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.737085] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.737503] ACPI: PCI Interrupt Link [AXV5] (IRQs 16) *0
[ 0.737921] ACPI: PCI Interrupt Link [AXV6] (IRQs 16) *0, disabled.
[ 0.738386] ACPI: PCI Interrupt Link [AXV7] (IRQs 16) *0, disabled.
[ 0.738851] ACPI: PCI Interrupt Link [AXV8] (IRQs 16) *0, disabled.
[ 0.739317] ACPI: PCI Interrupt Link [AUBA] (IRQs 22 23) *0
[ 0.739780] ACPI: PCI Interrupt Link [AMA1] (IRQs 22 23) *0
[ 0.740267] ACPI: PCI Interrupt Link [AMAC] (IRQs 22 23) *0
[ 0.740730] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0
[ 0.741192] ACPI: PCI Interrupt Link [AACI] (IRQs 22 23) *0, disabled.
[ 0.741703] ACPI: PCI Interrupt Link [AMCI] (IRQs 22 23) *0, disabled.
[ 0.742234] ACPI: PCI Interrupt Link [ASMB] (IRQs 22 23) *0, disabled.
[ 0.742745] ACPI: PCI Interrupt Link [AUS2] (IRQs 22 23) *0
[ 0.743208] ACPI: PCI Interrupt Link [AIDE] (IRQs 22 23) *0, disabled.
[ 0.743721] ACPI: PCI Interrupt Link [ASA0] (IRQs 20 21) *0
[ 0.744186] ACPI: PCI Interrupt Link [ASA1] (IRQs 20 21) *0
[ 0.744651] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21) *0
[ 0.745061] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.745207] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
[ 0.745348] vgaarb: loaded
[ 0.745518] SCSI subsystem initialized
[ 0.745643] libata version 3.00 loaded.
[ 0.745643] usbcore: registered new interface driver usbfs
[ 0.745643] usbcore: registered new interface driver hub
[ 0.745643] usbcore: registered new device driver usb
[ 0.745643] ACPI: WMI: Mapper loaded
[ 0.745643] PCI: Using ACPI for IRQ routing
[ 0.745643] Bluetooth: Core ver 2.15
[ 0.745643] NET: Registered protocol family 31
[ 0.745643] Bluetooth: HCI device and connection manager initialized
[ 0.745643] Bluetooth: HCI socket layer initialized
[ 0.745643] NetLabel: Initializing
[ 0.745643] NetLabel: domain hash size = 128
[ 0.745643] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.745643] NetLabel: unlabeled traffic allowed by default
[ 0.745643] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.745643] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.760013] Switching to clocksource tsc
[ 0.761556] pnp: PnP ACPI init
[ 0.761665] ACPI: bus type pnp registered
[ 0.764888] pnp: PnP ACPI: found 13 devices
[ 0.764982] ACPI: ACPI bus type pnp unregistered
[ 0.765084] system 00:00: ioport range 0x1000-0x107f has been reserved
[ 0.765189] system 00:00: ioport range 0x1080-0x10ff has been reserved
[ 0.765293] system 00:00: ioport range 0x1400-0x147f has been reserved
[ 0.765397] system 00:00: ioport range 0x1480-0x14ff has been reserved
[ 0.765501] system 00:00: ioport range 0x1800-0x187f has been reserved
[ 0.765605] system 00:00: ioport range 0x1880-0x18ff has been reserved
[ 0.765712] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.765815] system 00:02: ioport range 0x295-0x314 has been reserved
[ 0.765918] system 00:02: ioport range 0x880-0x88f has been reserved
[ 0.766028] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.766139] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved
[ 0.766244] system 00:0c: iomem range 0xd5800-0xd7fff has been reserved
[ 0.766348] system 00:0c: iomem range 0xf0000-0xfbfff could not be reserved
[ 0.766454] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.766569] system 00:0c: iomem range 0x7fef0000-0x7fefffff could not be reserved
[ 0.766709] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.766816] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.766920] system 00:0c: iomem range 0x100000-0x7feeffff could not be reserved
[ 0.767059] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.767199] system 00:0c: iomem range 0xd0000000-0xdfffffff has been reserved
[ 0.767306] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.767413] system 00:0c: iomem range 0xfeff0000-0xfeff0000 has been reserved
[ 0.772206] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[ 0.772308] pci 0000:00:03.0: IO window: 0x9000-0x9fff
[ 0.772408] pci 0000:00:03.0: MEM window: 0xca000000-0xcdffffff
[ 0.772511] pci 0000:00:03.0: PREFETCH window: 0x000000b0000000-0x000000bfffffff
[ 0.772653] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:02
[ 0.772755] pci 0000:00:0f.0: IO window: 0x8000-0x8fff
[ 0.772855] pci 0000:00:0f.0: MEM window: 0xcfe00000-0xcfefffff
[ 0.772958] pci 0000:00:0f.0: PREFETCH window: disabled
[ 0.773058] pci 0000:00:18.0: PCI bridge, secondary bus 0000:03
[ 0.773160] pci 0000:00:18.0: IO window: 0x7000-0x7fff
[ 0.773260] pci 0000:00:18.0: MEM window: 0xc6000000-0xc9ffffff
[ 0.773363] pci 0000:00:18.0: PREFETCH window: 0x000000a0000000-0x000000afffffff
[ 0.773510] pci 0000:00:03.0: setting latency timer to 64
[ 0.773514] pci 0000:00:0f.0: setting latency timer to 64
[ 0.773521] pci 0000:00:18.0: setting latency timer to 64
[ 0.773524] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.773526] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.773528] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.773530] pci_bus 0000:01: resource 1 mem: [0xca000000-0xcdffffff]
[ 0.773532] pci_bus 0000:01: resource 2 pref mem [0xb0000000-0xbfffffff]
[ 0.773534] pci_bus 0000:02: resource 0 io: [0x8000-0x8fff]
[ 0.773536] pci_bus 0000:02: resource 1 mem: [0xcfe00000-0xcfefffff]
[ 0.773538] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.773539] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.773541] pci_bus 0000:03: resource 0 io: [0x7000-0x7fff]
[ 0.773543] pci_bus 0000:03: resource 1 mem: [0xc6000000-0xc9ffffff]
[ 0.773545] pci_bus 0000:03: resource 2 pref mem [0xa0000000-0xafffffff]
[ 0.773577] NET: Registered protocol family 2
[ 0.773784] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.774483] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.776238] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.776889] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.776994] TCP reno registered
[ 0.777219] NET: Registered protocol family 1
[ 0.799986] pci 0000:01:00.0: Boot video device
[ 0.800075] Trying to unpack rootfs image as initramfs...
[ 0.955733] Freeing initrd memory: 8333k freed
[ 0.961352] Scanning for low memory corruption every 60 seconds
[ 0.961619] audit: initializing netlink socket (disabled)
[ 0.961734] type=2000 audit(1264042305.957:1): initialized
[ 0.970141] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.971577] VFS: Disk quotas dquot_6.5.2
[ 0.971739] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.972359] fuse init (API version 7.13)
[ 0.972552] msgmni has been set to 4015
[ 0.973073] alg: No test for stdrng (krng)
[ 0.973200] io scheduler noop registered
[ 0.973304] io scheduler anticipatory registered
[ 0.973399] io scheduler deadline registered
[ 0.973520] io scheduler cfq registered (default)
[ 0.973745] alloc irq_desc for 24 on node -1
[ 0.973747] alloc kstat_irqs on node -1
[ 0.973755] pcieport 0000:00:03.0: irq 24 for MSI/MSI-X
[ 0.973760] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.973852] alloc irq_desc for 25 on node -1
[ 0.973854] alloc kstat_irqs on node -1
[ 0.973859] pcieport 0000:00:18.0: irq 25 for MSI/MSI-X
[ 0.973865] pcieport 0000:00:18.0: setting latency timer to 64
[ 0.973927] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.974044] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.974276] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.974420] ACPI: Power Button [PWRB]
[ 0.974564] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.974703] ACPI: Power Button [PWRF]
[ 0.975242] processor LNXCPU:00: registered as cooling_device0
[ 0.975390] processor LNXCPU:01: registered as cooling_device1
[ 0.976932] processor LNXCPU:02: registered as cooling_device2
[ 0.977066] processor LNXCPU:03: registered as cooling_device3
[ 0.981001] Linux agpgart interface v0.103
[ 0.981096] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.981296] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.981666] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.982558] brd: module loaded
[ 0.983002] loop: module loaded
[ 0.983150] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.983505] sata_nv 0000:00:0e.0: version 3.5
[ 0.983746] ACPI: PCI Interrupt Link [ASA0] enabled at IRQ 21
[ 0.983849] alloc irq_desc for 21 on node -1
[ 0.983851] alloc kstat_irqs on node -1
[ 0.983856] sata_nv 0000:00:0e.0: PCI INT A -> Link[ASA0] -> GSI 21 (level, low) -> IRQ 21
[ 0.984224] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 0.984313] scsi0 : sata_nv
[ 0.984501] scsi1 : sata_nv
[ 0.984722] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 21
[ 0.984829] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
[ 0.985222] ACPI: PCI Interrupt Link [ASA1] enabled at IRQ 20
[ 0.985323] alloc irq_desc for 20 on node -1
[ 0.985324] alloc kstat_irqs on node -1
[ 0.985328] sata_nv 0000:00:0e.1: PCI INT B -> Link[ASA1] -> GSI 20 (level, low) -> IRQ 20
[ 0.985494] sata_nv 0000:00:0e.1: setting latency timer to 64
[ 0.985573] scsi2 : sata_nv
[ 0.985744] scsi3 : sata_nv
[ 0.985961] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 20
[ 0.986068] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 20
[ 0.986496] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[ 0.986598] sata_nv 0000:00:0e.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 0.986765] sata_nv 0000:00:0e.2: setting latency timer to 64
[ 0.986839] scsi4 : sata_nv
[ 0.987024] scsi5 : sata_nv
[ 0.987253] ata5: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb000 irq 21
[ 0.987360] ata6: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xb008 irq 21
[ 0.987643] pata_amd 0000:00:0d.0: version 0.4.1
[ 0.987672] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 0.987766] scsi6 : pata_amd
[ 0.987952] scsi7 : pata_amd
[ 0.988502] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xec00 irq 14
[ 0.988608] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xec08 irq 15
[ 0.988817] ata7: port disabled. ignoring.
[ 0.989369] Fixed MDIO Bus: probed
[ 0.989485] PPP generic driver version 2.4.2
[ 0.989644] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.989985] ACPI: PCI Interrupt Link [AUS2] enabled at IRQ 23
[ 0.990086] alloc irq_desc for 23 on node -1
[ 0.990088] alloc kstat_irqs on node -1
[ 0.990091] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[AUS2] -> GSI 23 (level, low) -> IRQ 23
[ 0.990239] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 0.990242] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 0.990377] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 0.990561] ehci_hcd 0000:00:0b.1: debug port 1
[ 0.990665] ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported
[ 0.990678] ehci_hcd 0000:00:0b.1: irq 23, io mem 0xcfffe000
[ 1.007680] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 1.007873] usb usb1: configuration #1 chosen from 1 choice
[ 1.008005] hub 1-0:1.0: USB hub found
[ 1.008101] hub 1-0:1.0: 10 ports detected
[ 1.008244] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.008585] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 22
[ 1.008686] alloc irq_desc for 22 on node -1
[ 1.008688] alloc kstat_irqs on node -1
[ 1.008691] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[AUBA] -> GSI 22 (level, low) -> IRQ 22
[ 1.008839] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 1.008841] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 1.008981] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 1.009154] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xcffff000
[ 1.072207] usb usb2: configuration #1 chosen from 1 choice
[ 1.072325] hub 2-0:1.0: USB hub found
[ 1.072424] hub 2-0:1.0: 10 ports detected
[ 1.072586] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.072775] PNP: No PS/2 controller found. Probing ports directly.
[ 1.075549] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.075650] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.075829] mice: PS/2 mouse device common for all mice
[ 1.075991] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 1.076130] rtc_cmos 00:05: RTC can wake from S4
[ 1.076250] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.076379] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.076573] device-mapper: uevent: version 1.0.3
[ 1.076790] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.077170] device-mapper: multipath: version 1.1.0 loaded
[ 1.077273] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.077809] cpuidle: using governor ladder
[ 1.077922] cpuidle: using governor menu
[ 1.078319] TCP cubic registered
[ 1.078500] NET: Registered protocol family 10
[ 1.078991] lo: Disabled Privacy Extensions
[ 1.079333] NET: Registered protocol family 17
[ 1.079441] Bluetooth: L2CAP ver 2.14
[ 1.079532] Bluetooth: L2CAP socket layer initialized
[ 1.079630] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.079724] Bluetooth: SCO socket layer initialized
[ 1.079885] Bluetooth: RFCOMM TTY layer initialized
[ 1.079996] Bluetooth: RFCOMM socket layer initialized
[ 1.080098] Bluetooth: RFCOMM ver 1.11
[ 1.080285] PM: Resume from disk failed.
[ 1.080303] registered taskstats version 1
[ 1.080790] Magic number: 10:95:865
[ 1.080951] rtc_cmos 00:05: setting system clock to 2010-01-21 02:51:46 UTC (1264042306)
[ 1.081104] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.081205] EDD information not available.
[ 1.320595] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.470055] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.480061] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.490161] ata3.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB01, max UDMA/33
[ 1.490285] ata3.00: applying bridge limits
[ 1.500374] ata5.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
[ 1.500485] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.530186] ata3.00: configured for UDMA/33
[ 1.540393] ata5.00: configured for UDMA/133
[ 1.620037] usb 2-5: new low speed USB device using ohci_hcd and address 2
[ 1.660539] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.661577] scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
[ 1.668827] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.668971] Uniform CD-ROM driver Revision: 3.20
[ 1.669141] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.669172] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 1.848284] usb 2-5: configuration #1 chosen from 1 choice
[ 2.150063] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.170164] ata4.00: ATAPI: ATAPI iHOS104, WL0B, max UDMA/100
[ 2.210176] ata4.00: configured for UDMA/100
[ 3.060032] usb 2-6: new full speed USB device using ohci_hcd and address 3
[ 3.297381] usb 2-6: configuration #1 chosen from 1 choice
[ 7.210052] ata4.00: qc timeout (cmd 0xa0)
[ 7.210151] ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 7.700063] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.760176] ata4.00: configured for UDMA/100
[ 12.760048] ata4.00: qc timeout (cmd 0xa0)
[ 12.760147] ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 12.760251] ata4: limiting SATA link speed to 1.5 Gbps
[ 12.760350] ata4.00: limiting speed to UDMA/100:PIO3
[ 13.250062] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 13.310176] ata4.00: configured for UDMA/100
[ 18.310074] ata4.00: qc timeout (cmd 0xa0)
[ 18.310173] ata4.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 18.310275] ata4.00: disabled
[ 18.310382] ata4: hard resetting link
[ 18.310473] ata4: nv: skipping hardreset on occupied port
[ 18.800062] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 18.800173] ata4: EH complete
[ 18.800386] scsi 4:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
[ 18.800639] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 18.800663] sd 4:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 18.800701] sd 4:0:0:0: [sda] Write Protect is off
[ 18.800703] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 18.800722] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.800831] sda: sda1
[ 18.807304] sd 4:0:0:0: [sda] Attached SCSI disk
[ 19.290064] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 19.347656] ata6.00: ATA-7: ST3320620AS, 3.AAD, max UDMA/133
[ 19.347760] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 19.430954] ata6.00: configured for UDMA/133
[ 19.431212] scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 19.431476] sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 19.431507] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 19.431619] ata8: port disabled. ignoring.
[ 19.431776] sd 5:0:0:0: [sdb] Write Protect is off
[ 19.431873] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 19.431892] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.432129] sdb: sdb1 sdb2 < sdb5 >
[ 19.491235] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 19.491374] Freeing unused kernel memory: 728k freed
[ 19.491789] Write protecting the kernel read-only data: 7792k
[ 19.603999] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 19.604476] ACPI: PCI Interrupt Link [AMAC] enabled at IRQ 23
[ 19.604582] forcedeth 0000:00:11.0: PCI INT A -> Link[AMAC] -> GSI 23 (level, low) -> IRQ 23
[ 19.604731] forcedeth 0000:00:11.0: setting latency timer to 64
[ 19.604799] nv_probe: set workaround bit for reversed mac addr
[ 19.627102] FDC 0 is a post-1991 82077
[ 19.630104] usbcore: registered new interface driver hiddev
[ 19.632895] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 19.633001] alloc irq_desc for 19 on node -1
[ 19.633003] alloc kstat_irqs on node -1
[ 19.633010] ohci1394 0000:02:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 19.636785] input: Ideazon Zboard Gaming Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.0/input/input3
[ 19.636992] generic-usb 0003:1038:0210.0001: input,hidraw0: USB HID v1.11 Keyboard [Ideazon Zboard Gaming Keyboard] on usb-0000:00:0b.0-5/input0
[ 19.649502] input: Ideazon Zboard Gaming Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.1/input/input4
[ 19.649736] generic-usb 0003:1038:0210.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Ideazon Zboard Gaming Keyboard] on usb-0000:00:0b.0-5/input1
[ 19.657493] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6:1.0/input/input5
[ 19.659125] generic-usb 0003:1532:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:0b.0-6/input0
[ 19.664192] input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6:1.1/input/input6
[ 19.664448] generic-usb 0003:1532:0101.0004: input,hidraw3: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:0b.0-6/input1
[ 19.664651] usbcore: registered new interface driver usbhid
[ 19.664777] usbhid: v2.6:USB HID core driver
[ 19.690111] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[cfeff000-cfeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 20.130768] forcedeth 0000:00:11.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:04:4b:05:cb:6c
[ 20.130915] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 20.131337] ACPI: PCI Interrupt Link [AMA1] enabled at IRQ 22
[ 20.131439] forcedeth 0000:00:12.0: PCI INT A -> Link[AMA1] -> GSI 22 (level, low) -> IRQ 22
[ 20.131584] forcedeth 0000:00:12.0: setting latency timer to 64
[ 20.131622] nv_probe: set workaround bit for reversed mac addr
[ 20.660779] forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x5043 @ 2, addr 00:04:4b:05:cb:6d
[ 20.660923] forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 20.879482] PM: Starting manual resume from disk
[ 20.879584] PM: Resume from partition 8:21
[ 20.879586] PM: Checking hibernation image.
[ 20.879750] PM: Error -22 checking image file
[ 20.879753] PM: Resume from disk failed.
[ 20.946584] EXT4-fs (sdb1): mounted filesystem with ordered data mode
[ 21.005329] ieee1394: Host added: ID:BUS[0-00:1023] GUID[1aa25f0500044b06]
[ 36.196339] udev: starting version 147
[ 36.336001] Adding 6024332k swap on /dev/sdb5. Priority:-1 extents:1 across:6024332k
[ 36.460981] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 36.533040] i2c i2c-0: nForce2 SMBus adapter at 0xf400
[ 36.533061] i2c i2c-1: nForce2 SMBus adapter at 0xf000
[ 36.930438] lp: driver loaded but no devices found
[ 37.116949] nvidia: module license 'NVIDIA' taints kernel.
[ 37.116954] Disabling lock debugging due to kernel taint
[ 37.409723] alloc irq_desc for 26 on node -1
[ 37.409729] alloc kstat_irqs on node -1
[ 37.409738] forcedeth 0000:00:11.0: irq 26 for MSI/MSI-X
[ 37.409931] eth0: no link during initialization.
[ 37.410511] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.587107] ACPI: PCI Interrupt Link [AXV5] enabled at IRQ 16
[ 37.587115] alloc irq_desc for 16 on node -1
[ 37.587117] alloc kstat_irqs on node -1
[ 37.587137] nvidia 0000:01:00.0: PCI INT A -> Link[AXV5] -> GSI 16 (level, low) -> IRQ 16
[ 37.587203] nvidia 0000:01:00.0: setting latency timer to 64
[ 37.587598] nvidia 0000:03:00.0: enabling device (0000 -> 0003)
[ 37.587604] nvidia 0000:03:00.0: PCI INT A -> Link[AXV5] -> GSI 16 (level, low) -> IRQ 16
[ 37.587612] nvidia 0000:03:00.0: setting latency timer to 64
[ 37.588016] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009
[ 37.625089] alloc irq_desc for 27 on node -1
[ 37.625092] alloc kstat_irqs on node -1
[ 37.625101] forcedeth 0000:00:12.0: irq 27 for MSI/MSI-X
[ 37.940509] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 37.940514] alloc irq_desc for 17 on node -1
[ 37.940516] alloc kstat_irqs on node -1
[ 37.940522] CA0106 0000:02:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 37.940546] snd-ca0106: Model 1011 Rev 00000000 Serial 10111102
[ 37.966520] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 37.966525] HDA Intel 0000:00:0f.1: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
[ 37.966557] HDA Intel 0000:00:0f.1: setting latency timer to 64
[ 39.494379] hda_codec: ALC889A: BIOS auto-probing.
[ 40.090350] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.1/input/input7
[ 40.803847] RPC: Registered udp transport module.
[ 40.803850] RPC: Registered tcp transport module.
[ 40.803851] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 40.957334] Bridge firewalling registered
[ 40.959871] device eth0 entered promiscuous mode
[ 43.429960] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 43.429964] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance
[ 43.429965] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 43.429966] vboxdrv: the usage of hardware performance counters by
[ 43.429967] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 43.429971] vboxdrv: Found 4 processor cores.
[ 43.430667] VBoxDrv: dbg - g_abExecMemory=ffffffffa0d71460
[ 43.430723] vboxdrv: fAsync=0 offMin=0x4f6 offMax=0x2e04
[ 43.431169] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 43.431171] vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000).
[ 43.635875] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0b1a260
[ 43.638013] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa0f0db00
[ 43.709833] virbr0: starting userspace STP failed, starting kernel STP
[ 43.768351] ppdev: user-space parallel port driver
[ 43.788938] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 43.789339] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 43.789341] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 43.789342] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 47.474245] lo: Disabled Privacy Extensions
[ 48.370049] eth1: no IPv6 routers present
[ 51.033227] svc: failed to register lockdv1 RPC service (errno 97).
[ 51.311276] br0: no IPv6 routers present
next reply other threads:[~2010-01-21 3:16 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-21 3:15 Gregory Moyer [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-06-03 17:40 sata_nv times out for BD-ROM iHOS104-08 Gregory Moyer
2010-01-17 4:54 Gregory Moyer
2009-12-22 16:07 Cengiz Gunay
2009-12-23 7:38 ` Tejun Heo
[not found] ` <d2d378040912232302u4b550dap687fcadced237935@mail.gmail.com>
2009-12-24 7:25 ` Tejun Heo
2010-01-16 21:34 ` Cengiz Günay
2010-01-17 15:28 ` Ozan Çağlayan
2010-01-19 9:05 ` Tejun Heo
2010-01-19 9:34 ` Ozan Çağlayan
2010-01-20 2:13 ` Tejun Heo
2010-01-20 2:59 ` Robert Hancock
2010-01-22 14:11 ` Cengiz Günay
2010-01-23 3:45 ` Tejun Heo
2010-01-23 21:39 ` Cengiz Günay
[not found] ` <4B67A149.10406@kernel.org>
2010-02-17 16:14 ` Cengiz Günay
2010-02-18 1:50 ` Tejun Heo
2010-02-20 19:11 ` Cengiz Günay
2010-02-21 1:01 ` Tejun Heo
2010-02-21 21:28 ` Cengiz Günay
2010-02-23 2:38 ` Tejun Heo
2010-02-28 17:24 ` Cengiz Günay
2010-03-02 11:48 ` Tejun Heo
2010-03-08 19:17 ` Cengiz Günay
2010-03-08 23:46 ` Robert Hancock
2010-03-09 1:21 ` Tejun Heo
2010-03-09 5:18 ` Cengiz Günay
2010-05-25 19:34 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d4fb20ca1001201915p59d3c9eal6014c22d449c46e6@mail.gmail.com \
--to=raven2k@syphr.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).