From: guorke <gourke@gmail.com>
To: linux-kernel@vger.kernel.org
Subject: 2.6.12 can not support via rhine?
Date: Thu, 23 Jun 2005 12:17:58 +0800 [thread overview]
Message-ID: <d73ab4d005062221176e77a960@mail.gmail.com> (raw)
hi
when i reboot use 2.6.11,it's ok.
but when i use 2.6.12 kernel, i get this:
via rhine device dose not seem to be present , delaying eth0 initialzation..
but in 2.6.11, it's say ok, I must say i have add via rhine support.
this following is difference output demsg :
diff -y dmesg_2.6.11 dmesg_2.6.12
VFS: Mounted root (ext3 filesystem) readonly. VFS:
Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 220k freed |
Freeing unused kernel memory: 224k freed
kjournald starting. Commit interval 5 seconds <
EXT3 FS on hda1, internal journal EXT3
FS on hda1, internal journal
Adding 265064k swap on /dev/hda2. Priority:-1 extents:1 Adding
265064k swap on /dev/hda2. Priority:-1 extents:1
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald <
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 <
PCI: setting IRQ 12 as level-triggered <
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 12 (level, low) -> <
eth0: VIA Rhine II at 0x1e800, 00:05:5d:fb:7d:29, IRQ 12. <
eth0: MII PHY found at address 8, status 0x782d advertising 0 <
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 <
like no via rhine.
Thanks
next reply other threads:[~2005-06-23 4:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-23 4:17 guorke [this message]
2005-06-23 4:21 ` 2.6.12 can not support via rhine? guorke
2005-06-23 5:04 ` guorke
2005-06-23 18:09 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d73ab4d005062221176e77a960@mail.gmail.com \
--to=gourke@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox