From: Tao Cui <cui.tao@linux.dev>
To: "Joe Simmons-Talbott" <joest@redhat.com>,
"Tejun Heo" <tj@kernel.org>,
"Johannes Weiner" <hannes@cmpxchg.org>,
"Michal Koutný" <mkoutny@suse.com>,
"Shuah Khan" <shuah@kernel.org>
Cc: cui.tao@linux.dev, cgroups@vger.kernel.org,
linux-kselftest@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] selftests/cgroup: Adjust cpu.max quota based on HZ
Date: Tue, 23 Jun 2026 13:32:08 +0800 [thread overview]
Message-ID: <d8bdf9ef-a393-4734-8639-308ac3eaa05c@linux.dev> (raw)
In-Reply-To: <20260622194305.601392-1-joest@redhat.com>
Hi Joe,
One comment on the fallback:
quota_usec = hz != -1 ? USEC_PER_SEC / hz : 1000;
When HZ can't be determined (no CONFIG_IKCONFIG_PROC, or zcat missing),
the fallback to 1000 is the exact value that fails at low HZ — so this
doesn't actually fix such kernels. A larger fallback (e.g. 10000, the
HZ=100 equivalent) would make the tests robust regardless of whether the
config is exposed.
在 2026/6/23 03:43, Joe Simmons-Talbott 写道:
> For lower HZ values a quota of 1000us is much lower than the amount
> of microseconds per tick which makes the tests test_cpucg_max and
> test_cpugc_max_nested fail. Use the amount of microseconds per tick
> as the quota value.
>
> Signed-off-by: Joe Simmons-Talbott <joest@redhat.com>
> ---
> changes since v1:
> - Try checking /proc/config.gz to get the actual kernel HZ value and
> fallback to 1000 if the value cannot be determined.
>
> tools/testing/selftests/cgroup/test_cpu.c | 33 +++++++++++++++++++++--
> 1 file changed, 31 insertions(+), 2 deletions(-)
>
> diff --git a/tools/testing/selftests/cgroup/test_cpu.c b/tools/testing/selftests/cgroup/test_cpu.c
> index 7a40d76b9548..65e09555309f 100644
> --- a/tools/testing/selftests/cgroup/test_cpu.c
> +++ b/tools/testing/selftests/cgroup/test_cpu.c
> @@ -639,6 +639,29 @@ test_cpucg_nested_weight_underprovisioned(const char *root)
> return run_cpucg_nested_weight_test(root, false);
> }
>
> +/*
> + * Best effort attempt to get the kernel's HZ value from the config.
> + * Return the HZ value if found otherwise return -1 to indicate failure.
> + */
> +static long
> +_get_config_hz(void)
> +{
> + long hz = -1;
> + FILE *f;
> + char cmd[256] = "zcat /proc/config.gz 2>/dev/null | grep '^CONFIG_HZ='";
> +
> + f = popen(cmd, "r");
> +
> + if (!f)
> + goto out;
> +
> + fscanf(f, "CONFIG_HZ=%ld", &hz);
> +
> +out:
> + pclose(f);
> + return hz;
> +}
> +
> /*
> * This test creates a cgroup with some maximum value within a period, and
> * verifies that a process in the cgroup is not overscheduled.
> @@ -646,7 +669,8 @@ test_cpucg_nested_weight_underprovisioned(const char *root)
> static int test_cpucg_max(const char *root)
> {
> int ret = KSFT_FAIL;
> - long quota_usec = 1000;
> + long hz = _get_config_hz();
> + long quota_usec;
> long default_period_usec = 100000; /* cpu.max's default period */
> long duration_seconds = 1;
>
> @@ -655,6 +679,8 @@ static int test_cpucg_max(const char *root)
> char *cpucg;
> char quota_buf[32];
>
> + quota_usec = hz != -1 ? USEC_PER_SEC / hz : 1000;
> +
> snprintf(quota_buf, sizeof(quota_buf), "%ld", quota_usec);
>
> cpucg = cg_name(root, "cpucg_test");
> @@ -710,7 +736,8 @@ static int test_cpucg_max(const char *root)
> static int test_cpucg_max_nested(const char *root)
> {
> int ret = KSFT_FAIL;
> - long quota_usec = 1000;
> + long quota_usec;
> + long hz = _get_config_hz();
> long default_period_usec = 100000; /* cpu.max's default period */
> long duration_seconds = 1;
>
> @@ -719,6 +746,8 @@ static int test_cpucg_max_nested(const char *root)
> char *parent, *child;
> char quota_buf[32];
>
> + quota_usec = hz != -1 ? USEC_PER_SEC / hz : 1000;
> +
> snprintf(quota_buf, sizeof(quota_buf), "%ld", quota_usec);
>
> parent = cg_name(root, "cpucg_parent");
next prev parent reply other threads:[~2026-06-23 5:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-22 19:43 [PATCH v2] selftests/cgroup: Adjust cpu.max quota based on HZ Joe Simmons-Talbott
2026-06-23 5:32 ` Tao Cui [this message]
2026-06-23 11:51 ` Joe Simmons-Talbott
2026-06-23 13:52 ` Michal Koutný
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d8bdf9ef-a393-4734-8639-308ac3eaa05c@linux.dev \
--to=cui.tao@linux.dev \
--cc=cgroups@vger.kernel.org \
--cc=hannes@cmpxchg.org \
--cc=joest@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=mkoutny@suse.com \
--cc=shuah@kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox