From: Sourabh Jain <sourabhjain@linux.ibm.com>
To: Narayana Murty N <nnmlinux@linux.ibm.com>,
mahesh@linux.ibm.com, maddy@linux.ibm.com, mpe@ellerman.id.au,
christophe.leroy@csgroup.eu, gregkh@linuxfoundation.org,
oohall@gmail.com, npiggin@gmail.com
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
tyreld@linux.ibm.com, vaibhav@linux.ibm.com, sbhat@linux.ibm.com,
ganeshgr@linux.ibm.com, haren@linux.ibm.com, thuth@redhat.com
Subject: Re: [PATCH v3 5/5] powerpc/powernv/eeh: Map VFIO EEH error injection to OPAL
Date: Sun, 9 Aug 2026 17:30:59 +0530 [thread overview]
Message-ID: <da980fd2-cab1-4834-b4d5-49bdffa29726@linux.ibm.com> (raw)
In-Reply-To: <1e9ba55b-9126-419e-9dc1-c560822b11db@linux.ibm.com>
On 05/08/26 11:53, Narayana Murty N wrote:
> Hi Sourabh,
>
> On 05/08/26 12:01 AM, Sourabh Jain wrote:
>>
>>
>> As per the title this series is about RTAS-based error injection on
>> pSeries.
>>
>> Then why do we have powernv/opal patch part of this series?
>>
>> - Sourabh Jain
>>
> The guest running on povernv host also a pseries guest. VFIO will take
> care of
> translating the calls to respective platforms. So as a platform
> comparability
> the changes are made in this series.
Oh, okay. These changes are for a pSeries guest running on a PowerNV
platform.
Thanks for the clarification.
- Sourabh Jain
>
> Regards,
> Narayana.
>
>>
>> On 21/07/26 09:08, Narayana Murty N wrote:
>>> The EEH error-injection interface passes the generic userspace ABI
>>> values EEH_ERR_TYPE_32 and EEH_ERR_TYPE_64 to the platform backend.
>>>
>>> The PowerNV backend currently compares those generic values directly
>>> with OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR and
>>> OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64. Although the corresponding values
>>> are currently numerically identical, this implicitly couples the
>>> generic EEH ABI to the OPAL firmware encoding.
>>>
>>> Explicitly translate the generic EEH error types to their OPAL
>>> equivalents in pnv_eeh_err_inject(). Keep the platform-specific
>>> encoding within the PowerNV backend and reject unsupported generic
>>> types with -EINVAL.
>>>
>>> No userspace ABI values are changed.
>>>
>>> Signed-off-by: Narayana Murty N <nnmlinux@linux.ibm.com>
>>> ---
>>> arch/powerpc/platforms/powernv/eeh-powernv.c | 36
>>> +++++++++++++++++---
>>> 1 file changed, 32 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c
>>> b/arch/powerpc/platforms/powernv/eeh-powernv.c
>>> index db3370d1673c..b0bcd014a133 100644
>>> --- a/arch/powerpc/platforms/powernv/eeh-powernv.c
>>> +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c
>>> @@ -1169,11 +1169,39 @@ static int pnv_eeh_err_inject(struct eeh_pe
>>> *pe, int type, int func,
>>> struct pnv_phb *phb = hose->private_data;
>>> s64 rc;
>>> - if (type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR &&
>>> - type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64) {
>>> - pr_warn("%s: Invalid error type %d\n",
>>> + /*
>>> + * Map generic EEH error-type ABI values to OPAL-specific type
>>> codes.
>>> + * EEH_ERR_TYPE_32 and EEH_ERR_TYPE_64 are the only types
>>> supported by
>>> + * OPAL. Additional generic types defined in the UAPI header
>>> are valid
>>> + * for pSeries RTAS but unsupported here; return -EOPNOTSUPP
>>> for those.
>>> + * Unknown or invalid values return -EINVAL.
>>> + *
>>> + * Note: currently OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR == 0 ==
>>> + * EEH_ERR_TYPE_32 and OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64 == 1 ==
>>> + * EEH_ERR_TYPE_64, but the explicit switch makes the coupling
>>> + * visible and allows the values to diverge independently.
>>> + */
>>> + switch (type) {
>>> + case EEH_ERR_TYPE_32:
>>> + type = OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR;
>>> + break;
>>> + case EEH_ERR_TYPE_64:
>>> + type = OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64;
>>> + break;
>>> + case EEH_ERR_TYPE_RECOVERED_SPECIAL_EVENT:
>>> + case EEH_ERR_TYPE_CORRUPTED_PAGE:
>>> + case EEH_ERR_TYPE_CORRUPTED_DCACHE_START:
>>> + case EEH_ERR_TYPE_CORRUPTED_DCACHE_END:
>>> + case EEH_ERR_TYPE_CORRUPTED_ICACHE_START:
>>> + case EEH_ERR_TYPE_CORRUPTED_ICACHE_END:
>>> + case EEH_ERR_TYPE_CORRUPTED_TLB_START:
>>> + case EEH_ERR_TYPE_CORRUPTED_TLB_END:
>>> + pr_warn("%s: EEH error type %d not supported by OPAL\n",
>>> __func__, type);
>>> - return -ERANGE;
>>> + return -EOPNOTSUPP;
>>> + default:
>>> + pr_warn("%s: unsupported EEH error type %d\n", __func__,
>>> type);
>>> + return -EINVAL;
>>> }
>>> if (func < OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR ||
>>
>
prev parent reply other threads:[~2026-08-09 12:01 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-21 3:38 [PATCH v3 0/5] powerpc/eeh: Add RTAS-based error injection support on pSeries Narayana Murty N
2026-07-21 3:38 ` [PATCH v3 1/5] powerpc/rtas: Handle ibm,open-errinjct return format Narayana Murty N
2026-08-04 5:52 ` Sourabh Jain
2026-07-21 3:38 ` [PATCH v3 2/5] powerpc/rtas: Allocate ibm,errinjct buffer below RTAS limit Narayana Murty N
2026-08-04 7:22 ` Sourabh Jain
2026-07-21 3:38 ` [PATCH v3 3/5] powerpc/pseries/eeh: Add RTAS error validation helpers Narayana Murty N
2026-08-04 18:05 ` Sourabh Jain
2026-07-21 3:38 ` [PATCH v3 4/5] powerpc/pseries/eeh: Implement RTAS-based EEH error injection Narayana Murty N
2026-08-04 18:26 ` Sourabh Jain
2026-07-21 3:38 ` [PATCH v3 5/5] powerpc/powernv/eeh: Map VFIO EEH error injection to OPAL Narayana Murty N
2026-08-04 18:31 ` Sourabh Jain
2026-08-05 6:23 ` Narayana Murty N
2026-08-09 12:00 ` Sourabh Jain [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=da980fd2-cab1-4834-b4d5-49bdffa29726@linux.ibm.com \
--to=sourabhjain@linux.ibm.com \
--cc=christophe.leroy@csgroup.eu \
--cc=ganeshgr@linux.ibm.com \
--cc=gregkh@linuxfoundation.org \
--cc=haren@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=maddy@linux.ibm.com \
--cc=mahesh@linux.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=nnmlinux@linux.ibm.com \
--cc=npiggin@gmail.com \
--cc=oohall@gmail.com \
--cc=sbhat@linux.ibm.com \
--cc=thuth@redhat.com \
--cc=tyreld@linux.ibm.com \
--cc=vaibhav@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox