Fwd: Kernel 6.5.2 Causes Marvell Technology Group 88SE9128 PCIe SATA to Constantly Reset

[Bagas Sanjaya <bagasdotme@gmail.com>]

Hi,

I notice a regression report on Bugzilla [1]. Quoting from it:

> After upgrading to 6.5.2 from 6.4.12 I keep getting the following kernel messages around three times per second:
> 
> [ 9683.269830] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 9683.270399] ata16.00: configured for UDMA/66
> 
> So I've tracked the offending device:
> 
> ll /sys/class/ata_port/ata16
> lrwxrwxrwx 1 root root 0 Sep 10 21:51 /sys/class/ata_port/ata16 -> ../../devices/pci0000:00/0000:00:1c.7/0000:0a:00.0/ata16/ata_port/ata16
> 
> cat /sys/bus/pci/devices/0000:0a:00.0/uevent
> DRIVER=ahci
> PCI_CLASS=10601
> PCI_ID=1B4B:9130
> PCI_SUBSYS_ID=1043:8438
> PCI_SLOT_NAME=0000:0a:00.0
> MODALIAS=pci:v00001B4Bd00009130sv00001043sd00008438bc01sc06i01
> 
> lspci | grep 0a:00.0
> 0a:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9128 PCIe SATA 6 Gb/s RAID controller with HyperDuo (rev 11)
> 
> I am not using the 88SE9128, so I have no way of knowing whether it works or not. It may simply be getting reset a couple of times per second or it may not function at all.

See Bugzilla for the full thread.

patenteng: I have asked you to bisect this regression. Any conclusion?

Anyway, I'm adding this regression to regzbot:

#regzbot: introduced: v6.4..v6.5 https://bugzilla.kernel.org/show_bug.cgi?id=217902

Thanks.

[1]: https://bugzilla.kernel.org/show_bug.cgi?id=217902

-- 
An old man doll... just what I always wanted! - Clara