Re: [PATCH v2 2/4] net: phy: Initialize mdio clock at probe function

[Florian Fainelli <f.fainelli@gmail.com>]

On 01/17/2017 08:14 AM, Yendapally Reddy Dhananjaya Reddy wrote:
> Initialize mdio clock divisor in probe function. The ext bus
> bit available in the same register will be used by mdio mux
> to enable external mdio.
> 
> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>

David, this patch should go through your tree (but we forgot to CC you),
patch in patchwork is here:

http://patchwork.ozlabs.org/patch/716281/

Thanks!

> ---
>  drivers/net/phy/mdio-bcm-iproc.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/phy/mdio-bcm-iproc.c b/drivers/net/phy/mdio-bcm-iproc.c
> index c0b4e65..46fe1ae 100644
> --- a/drivers/net/phy/mdio-bcm-iproc.c
> +++ b/drivers/net/phy/mdio-bcm-iproc.c
> @@ -81,8 +81,6 @@ static int iproc_mdio_read(struct mii_bus *bus, int phy_id, int reg)
>  	if (rc)
>  		return rc;
>  
> -	iproc_mdio_config_clk(priv->base);
> -
>  	/* Prepare the read operation */
>  	cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
>  		(reg << MII_DATA_RA_SHIFT) |
> @@ -112,8 +110,6 @@ static int iproc_mdio_write(struct mii_bus *bus, int phy_id,
>  	if (rc)
>  		return rc;
>  
> -	iproc_mdio_config_clk(priv->base);
> -
>  	/* Prepare the write operation */
>  	cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
>  		(reg << MII_DATA_RA_SHIFT) |
> @@ -163,6 +159,8 @@ static int iproc_mdio_probe(struct platform_device *pdev)
>  	bus->read = iproc_mdio_read;
>  	bus->write = iproc_mdio_write;
>  
> +	iproc_mdio_config_clk(priv->base);
> +
>  	rc = of_mdiobus_register(bus, pdev->dev.of_node);
>  	if (rc) {
>  		dev_err(&pdev->dev, "MDIO bus registration failed\n");
> 


-- 
Florian