[PATCH v3 0/5] PM / devfreq: Various Fixes to cpufreq based passive governor

[PATCH v3 0/5] PM / devfreq: Various Fixes to cpufreq based passive governor

[Christian 'Ansuel' Marangi]

While developing a krait cache scaling devfreq driver I encounter tons
of panics and errors with using the new cpufreq passive governor
functions. While the krait cache scaling is still WIP and required some
testing I would like to push all the fixes to make the new
implementation wroking since currently with a the governor
PROBE_DEFERRing all sort of things happen from kernel panic from invalid
address access to freq_table getting corrupted.

With the following fixes my WIP driver works correctly without any
warning/problems. 

v3:
- Fix compilation error for list_for_each_entry_safe (i'm stupid -.-''')
v2:
- Fix wrong list_for_each_entry reported by Dan Carpenter

Christian 'Ansuel' Marangi (5):
  PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER
  PM / devfreq: Fix kernel warning with cpufreq passive register fail
  PM / devfreq: Fix kernel panic with cpu based scaling to passive gov
  PM / devfreq: Rework freq_table to be local to devfreq struct
  PM / devfreq: Mute warning on governor PROBE_DEFER

 drivers/devfreq/devfreq.c          | 75 ++++++++++++++----------------
 drivers/devfreq/governor_passive.c | 41 ++++++----------
 include/linux/devfreq.h            |  4 ++
 3 files changed, 54 insertions(+), 66 deletions(-)

-- 
2.36.1

[PATCH v3 1/5] PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER

[Christian 'Ansuel' Marangi]

With the passive governor, the cpu based scaling can PROBE_DEFER due to
the fact that CPU policy are not ready.
The cpufreq passive unregister notifier is called both from the
GOV_START errors and for the GOV_STOP and assume the notifier is
successfully registred every time. With GOV_START failing it's wrong to
loop over each possible CPU since the register path has failed for
some CPU policy not ready. Change the logic and unregister the notifer
based on the current allocated parent_cpu_data list to correctly handle
errors and the governor unregister path.

Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
---
 drivers/devfreq/governor_passive.c | 23 ++++++-----------------
 1 file changed, 6 insertions(+), 17 deletions(-)

diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
index 72c67979ebe1..0188c32f5198 100644
--- a/drivers/devfreq/governor_passive.c
+++ b/drivers/devfreq/governor_passive.c
@@ -222,8 +222,8 @@ static int cpufreq_passive_unregister_notifier(struct devfreq *devfreq)
 {
 	struct devfreq_passive_data *p_data
 			= (struct devfreq_passive_data *)devfreq->data;
-	struct devfreq_cpu_data *parent_cpu_data;
-	int cpu, ret = 0;
+	struct devfreq_cpu_data *parent_cpu_data, *tmp;
+	int ret;
 
 	if (p_data->nb.notifier_call) {
 		ret = cpufreq_unregister_notifier(&p_data->nb,
@@ -232,27 +232,16 @@ static int cpufreq_passive_unregister_notifier(struct devfreq *devfreq)
 			return ret;
 	}
 
-	for_each_possible_cpu(cpu) {
-		struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
-		if (!policy) {
-			ret = -EINVAL;
-			continue;
-		}
-
-		parent_cpu_data = get_parent_cpu_data(p_data, policy);
-		if (!parent_cpu_data) {
-			cpufreq_cpu_put(policy);
-			continue;
-		}
-
+	list_for_each_entry_safe(parent_cpu_data, tmp, &p_data->cpu_data_list, node) {
 		list_del(&parent_cpu_data->node);
+
 		if (parent_cpu_data->opp_table)
 			dev_pm_opp_put_opp_table(parent_cpu_data->opp_table);
+
 		kfree(parent_cpu_data);
-		cpufreq_cpu_put(policy);
 	}
 
-	return ret;
+	return 0;
 }
 
 static int cpufreq_passive_register_notifier(struct devfreq *devfreq)
-- 
2.36.1

Re: [PATCH v3 1/5] PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER

[Chanwoo Choi]

On 22. 6. 14. 20:06, Christian 'Ansuel' Marangi wrote:
> With the passive governor, the cpu based scaling can PROBE_DEFER due to
> the fact that CPU policy are not ready.
> The cpufreq passive unregister notifier is called both from the
> GOV_START errors and for the GOV_STOP and assume the notifier is
> successfully registred every time. With GOV_START failing it's wrong to
> loop over each possible CPU since the register path has failed for
> some CPU policy not ready. Change the logic and unregister the notifer
> based on the current allocated parent_cpu_data list to correctly handle
> errors and the governor unregister path.
> 
> Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
> Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
> ---
>  drivers/devfreq/governor_passive.c | 23 ++++++-----------------
>  1 file changed, 6 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
> index 72c67979ebe1..0188c32f5198 100644
> --- a/drivers/devfreq/governor_passive.c
> +++ b/drivers/devfreq/governor_passive.c
> @@ -222,8 +222,8 @@ static int cpufreq_passive_unregister_notifier(struct devfreq *devfreq)
>  {
>  	struct devfreq_passive_data *p_data
>  			= (struct devfreq_passive_data *)devfreq->data;
> -	struct devfreq_cpu_data *parent_cpu_data;
> -	int cpu, ret = 0;
> +	struct devfreq_cpu_data *parent_cpu_data, *tmp;
> +	int ret;
>  
>  	if (p_data->nb.notifier_call) {
>  		ret = cpufreq_unregister_notifier(&p_data->nb,
> @@ -232,27 +232,16 @@ static int cpufreq_passive_unregister_notifier(struct devfreq *devfreq)
>  			return ret;
>  	}
>  
> -	for_each_possible_cpu(cpu) {
> -		struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
> -		if (!policy) {
> -			ret = -EINVAL;
> -			continue;
> -		}
> -
> -		parent_cpu_data = get_parent_cpu_data(p_data, policy);
> -		if (!parent_cpu_data) {
> -			cpufreq_cpu_put(policy);
> -			continue;
> -		}
> -
> +	list_for_each_entry_safe(parent_cpu_data, tmp, &p_data->cpu_data_list, node) {
>  		list_del(&parent_cpu_data->node);
> +
>  		if (parent_cpu_data->opp_table)
>  			dev_pm_opp_put_opp_table(parent_cpu_data->opp_table);
> +
>  		kfree(parent_cpu_data);
> -		cpufreq_cpu_put(policy);
>  	}

I agree this patch. Just, I'd like to make the separate function
to handle the removing of parent_cpu_data.

Please add new delete_parent_cpu_data() function under get_parent_cpu_data()
implementation and then call delete_parent_cpu_data()
in cpufreq_passive_unregister_notifier().

>  
> -	return ret;
> +	return 0;
>  }
>  
>  static int cpufreq_passive_register_notifier(struct devfreq *devfreq)


-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

Re: [PATCH v3 1/5] PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER

[Ansuel Smith]

On Wed, Jun 15, 2022 at 07:58:16AM +0900, Chanwoo Choi wrote:
> On 22. 6. 14. 20:06, Christian 'Ansuel' Marangi wrote:
> > With the passive governor, the cpu based scaling can PROBE_DEFER due to
> > the fact that CPU policy are not ready.
> > The cpufreq passive unregister notifier is called both from the
> > GOV_START errors and for the GOV_STOP and assume the notifier is
> > successfully registred every time. With GOV_START failing it's wrong to
> > loop over each possible CPU since the register path has failed for
> > some CPU policy not ready. Change the logic and unregister the notifer
> > based on the current allocated parent_cpu_data list to correctly handle
> > errors and the governor unregister path.
> > 
> > Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
> > Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
> > ---
> >  drivers/devfreq/governor_passive.c | 23 ++++++-----------------
> >  1 file changed, 6 insertions(+), 17 deletions(-)
> > 
> > diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
> > index 72c67979ebe1..0188c32f5198 100644
> > --- a/drivers/devfreq/governor_passive.c
> > +++ b/drivers/devfreq/governor_passive.c
> > @@ -222,8 +222,8 @@ static int cpufreq_passive_unregister_notifier(struct devfreq *devfreq)
> >  {
> >  	struct devfreq_passive_data *p_data
> >  			= (struct devfreq_passive_data *)devfreq->data;
> > -	struct devfreq_cpu_data *parent_cpu_data;
> > -	int cpu, ret = 0;
> > +	struct devfreq_cpu_data *parent_cpu_data, *tmp;
> > +	int ret;
> >  
> >  	if (p_data->nb.notifier_call) {
> >  		ret = cpufreq_unregister_notifier(&p_data->nb,
> > @@ -232,27 +232,16 @@ static int cpufreq_passive_unregister_notifier(struct devfreq *devfreq)
> >  			return ret;
> >  	}
> >  
> > -	for_each_possible_cpu(cpu) {
> > -		struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
> > -		if (!policy) {
> > -			ret = -EINVAL;
> > -			continue;
> > -		}
> > -
> > -		parent_cpu_data = get_parent_cpu_data(p_data, policy);
> > -		if (!parent_cpu_data) {
> > -			cpufreq_cpu_put(policy);
> > -			continue;
> > -		}
> > -
> > +	list_for_each_entry_safe(parent_cpu_data, tmp, &p_data->cpu_data_list, node) {
> >  		list_del(&parent_cpu_data->node);
> > +
> >  		if (parent_cpu_data->opp_table)
> >  			dev_pm_opp_put_opp_table(parent_cpu_data->opp_table);
> > +
> >  		kfree(parent_cpu_data);
> > -		cpufreq_cpu_put(policy);
> >  	}
> 
> I agree this patch. Just, I'd like to make the separate function
> to handle the removing of parent_cpu_data.
> 
> Please add new delete_parent_cpu_data() function under get_parent_cpu_data()
> implementation and then call delete_parent_cpu_data()
> in cpufreq_passive_unregister_notifier().
>

Ok just to make sure I understand this correctly.
A dedicated function with just the list_for_each_entry_safe function
correct?

> >  
> > -	return ret;
> > +	return 0;
> >  }
> >  
> >  static int cpufreq_passive_register_notifier(struct devfreq *devfreq)
> 
> 
> -- 
> Best Regards,
> Samsung Electronics
> Chanwoo Choi

-- 
	Ansuel

Re: [PATCH v3 1/5] PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER

[Chanwoo Choi]

On 22. 6. 15. 07:07, Ansuel Smith wrote:
> On Wed, Jun 15, 2022 at 07:58:16AM +0900, Chanwoo Choi wrote:
>> On 22. 6. 14. 20:06, Christian 'Ansuel' Marangi wrote:
>>> With the passive governor, the cpu based scaling can PROBE_DEFER due to
>>> the fact that CPU policy are not ready.
>>> The cpufreq passive unregister notifier is called both from the
>>> GOV_START errors and for the GOV_STOP and assume the notifier is
>>> successfully registred every time. With GOV_START failing it's wrong to
>>> loop over each possible CPU since the register path has failed for
>>> some CPU policy not ready. Change the logic and unregister the notifer
>>> based on the current allocated parent_cpu_data list to correctly handle
>>> errors and the governor unregister path.
>>>
>>> Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
>>> Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
>>> ---
>>>  drivers/devfreq/governor_passive.c | 23 ++++++-----------------
>>>  1 file changed, 6 insertions(+), 17 deletions(-)
>>>
>>> diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
>>> index 72c67979ebe1..0188c32f5198 100644
>>> --- a/drivers/devfreq/governor_passive.c
>>> +++ b/drivers/devfreq/governor_passive.c
>>> @@ -222,8 +222,8 @@ static int cpufreq_passive_unregister_notifier(struct devfreq *devfreq)
>>>  {
>>>  	struct devfreq_passive_data *p_data
>>>  			= (struct devfreq_passive_data *)devfreq->data;
>>> -	struct devfreq_cpu_data *parent_cpu_data;
>>> -	int cpu, ret = 0;
>>> +	struct devfreq_cpu_data *parent_cpu_data, *tmp;
>>> +	int ret;
>>>  
>>>  	if (p_data->nb.notifier_call) {
>>>  		ret = cpufreq_unregister_notifier(&p_data->nb,
>>> @@ -232,27 +232,16 @@ static int cpufreq_passive_unregister_notifier(struct devfreq *devfreq)
>>>  			return ret;
>>>  	}
>>>  
>>> -	for_each_possible_cpu(cpu) {
>>> -		struct cpufreq_policy *policy = cpufreq_cpu_get(cpu);
>>> -		if (!policy) {
>>> -			ret = -EINVAL;
>>> -			continue;
>>> -		}
>>> -
>>> -		parent_cpu_data = get_parent_cpu_data(p_data, policy);
>>> -		if (!parent_cpu_data) {
>>> -			cpufreq_cpu_put(policy);
>>> -			continue;
>>> -		}
>>> -
>>> +	list_for_each_entry_safe(parent_cpu_data, tmp, &p_data->cpu_data_list, node) {
>>>  		list_del(&parent_cpu_data->node);
>>> +
>>>  		if (parent_cpu_data->opp_table)
>>>  			dev_pm_opp_put_opp_table(parent_cpu_data->opp_table);
>>> +
>>>  		kfree(parent_cpu_data);
>>> -		cpufreq_cpu_put(policy);
>>>  	}
>>
>> I agree this patch. Just, I'd like to make the separate function
>> to handle the removing of parent_cpu_data.
>>
>> Please add new delete_parent_cpu_data() function under get_parent_cpu_data()
>> implementation and then call delete_parent_cpu_data()
>> in cpufreq_passive_unregister_notifier().
>>
> 
> Ok just to make sure I understand this correctly.
> A dedicated function with just the list_for_each_entry_safe function
> correct?

Yes to remove the parent_cpu_data with list_for_each_entry_safe.

> 
>>>  
>>> -	return ret;
>>> +	return 0;
>>>  }
>>>  
>>>  static int cpufreq_passive_register_notifier(struct devfreq *devfreq)
>>
>>
>> -- 
>> Best Regards,
>> Samsung Electronics
>> Chanwoo Choi
> 


-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

[PATCH v3 2/5] PM / devfreq: Fix kernel warning with cpufreq passive register fail

[Christian 'Ansuel' Marangi]

When the cpufreq passive register path from the passive governor fails,
the cpufreq_passive_unregister is called and a kernel WARNING is always
reported.
This is caused by the fact that the devfreq driver already call the
governor unregister with the GOV_STOP, for this reason the second
cpufreq_passive_unregister always return error and a WARN is printed
from the WARN_ON function.
Remove the unregister call from the error handling of the cpufreq register
notifier as it's fundamentally wrong and already handled by the devfreq
core code.

Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
---
 drivers/devfreq/governor_passive.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
index 0188c32f5198..3c3322adea03 100644
--- a/drivers/devfreq/governor_passive.c
+++ b/drivers/devfreq/governor_passive.c
@@ -325,7 +325,6 @@ static int cpufreq_passive_register_notifier(struct devfreq *devfreq)
 err_put_policy:
 	cpufreq_cpu_put(policy);
 err:
-	WARN_ON(cpufreq_passive_unregister_notifier(devfreq));
 
 	return ret;
 }
-- 
2.36.1

[PATCH v3 3/5] PM / devfreq: Fix kernel panic with cpu based scaling to passive gov

[Christian 'Ansuel' Marangi]

The cpufreq passive register notifier can PROBE_DEFER and the devfreq
struct is freed and then reallocaed on probe retry.
The current logic assume that the code can't PROBE_DEFER so the devfreq
struct in the this variable in devfreq_passive_data is assumed to be
(if already set) always correct.
This cause kernel panic as the code try to access the wrong address.
To correctly handle this, update the this variable in
devfreq_passive_data to the devfreq reallocated struct.

Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
---
 drivers/devfreq/governor_passive.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
index 3c3322adea03..be8aa6830413 100644
--- a/drivers/devfreq/governor_passive.c
+++ b/drivers/devfreq/governor_passive.c
@@ -395,8 +395,7 @@ static int devfreq_passive_event_handler(struct devfreq *devfreq,
 	if (!p_data)
 		return -EINVAL;
 
-	if (!p_data->this)
-		p_data->this = devfreq;
+	p_data->this = devfreq;
 
 	switch (event) {
 	case DEVFREQ_GOV_START:
-- 
2.36.1

Re: [PATCH v3 3/5] PM / devfreq: Fix kernel panic with cpu based scaling to passive gov

[Chanwoo Choi]

On 22. 6. 14. 20:06, Christian 'Ansuel' Marangi wrote:
> The cpufreq passive register notifier can PROBE_DEFER and the devfreq
> struct is freed and then reallocaed on probe retry.
> The current logic assume that the code can't PROBE_DEFER so the devfreq
> struct in the this variable in devfreq_passive_data is assumed to be
> (if already set) always correct.
> This cause kernel panic as the code try to access the wrong address.
> To correctly handle this, update the this variable in
> devfreq_passive_data to the devfreq reallocated struct.
> 
> Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
> Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
> ---
>  drivers/devfreq/governor_passive.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
> index 3c3322adea03..be8aa6830413 100644
> --- a/drivers/devfreq/governor_passive.c
> +++ b/drivers/devfreq/governor_passive.c
> @@ -395,8 +395,7 @@ static int devfreq_passive_event_handler(struct devfreq *devfreq,
>  	if (!p_data)
>  		return -EINVAL;
>  
> -	if (!p_data->this)
> -		p_data->this = devfreq;
> +	p_data->this = devfreq;
>  
>  	switch (event) {
>  	case DEVFREQ_GOV_START:

Applied it to devfreq-fixes. Thanks.

-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

[PATCH v3 4/5] PM / devfreq: Rework freq_table to be local to devfreq struct

[Christian 'Ansuel' Marangi]

Currently we reference the freq_table to the profile defined one and we
make changes on it. Devfreq never supported PROBE_DEFER before the cpu
based scaling support to the passive governor and assumed that a devfreq
device could only had error and be done with it.
Now that a device can PROBE_DEFER a rework to the freq_table logic is
required.

If a device PROBE_DEFER on the GOV_START, the freq_table is already set
in the device profile struct and its init is skipped. This is due to the
fact that it's common for devs to declare this kind of struct static.
This cause the devfreq logic to find a freq table declared (freq_table
not NULL) with random data and poiting to the old addrs freed by devm.

This problem CAN be solved by devs by clearing the freq_table in their
profile struct on driver exit path but it should not be trusted and it
looks to use a flawed logic.

A better solution is to move the freq_table and max_state to the
devfreq struct and never change the profile struct.
This permit to correctly handle PROBE_DEFER since the devfreq struct is
reallocated and contains new values.
Also the profile struct should only be used to init the driver and should
not be used by the devfreq to write the freq_table if it's not provided
by the driver.

Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
---
 drivers/devfreq/devfreq.c          | 71 ++++++++++++++----------------
 drivers/devfreq/governor_passive.c | 14 +++---
 include/linux/devfreq.h            |  4 ++
 3 files changed, 45 insertions(+), 44 deletions(-)

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 01474daf4548..2e2b3b414d67 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -123,7 +123,7 @@ void devfreq_get_freq_range(struct devfreq *devfreq,
 			    unsigned long *min_freq,
 			    unsigned long *max_freq)
 {
-	unsigned long *freq_table = devfreq->profile->freq_table;
+	unsigned long *freq_table = devfreq->freq_table;
 	s32 qos_min_freq, qos_max_freq;
 
 	lockdep_assert_held(&devfreq->lock);
@@ -133,11 +133,11 @@ void devfreq_get_freq_range(struct devfreq *devfreq,
 	 * The devfreq drivers can initialize this in either ascending or
 	 * descending order and devfreq core supports both.
 	 */
-	if (freq_table[0] < freq_table[devfreq->profile->max_state - 1]) {
+	if (freq_table[0] < freq_table[devfreq->max_state - 1]) {
 		*min_freq = freq_table[0];
-		*max_freq = freq_table[devfreq->profile->max_state - 1];
+		*max_freq = freq_table[devfreq->max_state - 1];
 	} else {
-		*min_freq = freq_table[devfreq->profile->max_state - 1];
+		*min_freq = freq_table[devfreq->max_state - 1];
 		*max_freq = freq_table[0];
 	}
 
@@ -169,8 +169,8 @@ static int devfreq_get_freq_level(struct devfreq *devfreq, unsigned long freq)
 {
 	int lev;
 
-	for (lev = 0; lev < devfreq->profile->max_state; lev++)
-		if (freq == devfreq->profile->freq_table[lev])
+	for (lev = 0; lev < devfreq->max_state; lev++)
+		if (freq == devfreq->freq_table[lev])
 			return lev;
 
 	return -EINVAL;
@@ -178,7 +178,6 @@ static int devfreq_get_freq_level(struct devfreq *devfreq, unsigned long freq)
 
 static int set_freq_table(struct devfreq *devfreq)
 {
-	struct devfreq_dev_profile *profile = devfreq->profile;
 	struct dev_pm_opp *opp;
 	unsigned long freq;
 	int i, count;
@@ -188,25 +187,22 @@ static int set_freq_table(struct devfreq *devfreq)
 	if (count <= 0)
 		return -EINVAL;
 
-	profile->max_state = count;
-	profile->freq_table = devm_kcalloc(devfreq->dev.parent,
-					profile->max_state,
-					sizeof(*profile->freq_table),
-					GFP_KERNEL);
-	if (!profile->freq_table) {
-		profile->max_state = 0;
+	devfreq->max_state = count;
+	devfreq->freq_table = devm_kcalloc(devfreq->dev.parent,
+					   devfreq->max_state,
+					   sizeof(*devfreq->freq_table),
+					   GFP_KERNEL);
+	if (!devfreq->freq_table)
 		return -ENOMEM;
-	}
 
-	for (i = 0, freq = 0; i < profile->max_state; i++, freq++) {
+	for (i = 0, freq = 0; i < devfreq->max_state; i++, freq++) {
 		opp = dev_pm_opp_find_freq_ceil(devfreq->dev.parent, &freq);
 		if (IS_ERR(opp)) {
-			devm_kfree(devfreq->dev.parent, profile->freq_table);
-			profile->max_state = 0;
+			devm_kfree(devfreq->dev.parent, devfreq->freq_table);
 			return PTR_ERR(opp);
 		}
 		dev_pm_opp_put(opp);
-		profile->freq_table[i] = freq;
+		devfreq->freq_table[i] = freq;
 	}
 
 	return 0;
@@ -246,7 +242,7 @@ int devfreq_update_status(struct devfreq *devfreq, unsigned long freq)
 
 	if (lev != prev_lev) {
 		devfreq->stats.trans_table[
-			(prev_lev * devfreq->profile->max_state) + lev]++;
+			(prev_lev * devfreq->max_state) + lev]++;
 		devfreq->stats.total_trans++;
 	}
 
@@ -835,6 +831,9 @@ struct devfreq *devfreq_add_device(struct device *dev,
 		if (err < 0)
 			goto err_dev;
 		mutex_lock(&devfreq->lock);
+	} else {
+		devfreq->freq_table = devfreq->profile->freq_table;
+		devfreq->max_state = devfreq->profile->max_state;
 	}
 
 	devfreq->scaling_min_freq = find_available_min_freq(devfreq);
@@ -870,8 +869,8 @@ struct devfreq *devfreq_add_device(struct device *dev,
 
 	devfreq->stats.trans_table = devm_kzalloc(&devfreq->dev,
 			array3_size(sizeof(unsigned int),
-				    devfreq->profile->max_state,
-				    devfreq->profile->max_state),
+				    devfreq->max_state,
+				    devfreq->max_state),
 			GFP_KERNEL);
 	if (!devfreq->stats.trans_table) {
 		mutex_unlock(&devfreq->lock);
@@ -880,7 +879,7 @@ struct devfreq *devfreq_add_device(struct device *dev,
 	}
 
 	devfreq->stats.time_in_state = devm_kcalloc(&devfreq->dev,
-			devfreq->profile->max_state,
+			devfreq->max_state,
 			sizeof(*devfreq->stats.time_in_state),
 			GFP_KERNEL);
 	if (!devfreq->stats.time_in_state) {
@@ -1665,9 +1664,9 @@ static ssize_t available_frequencies_show(struct device *d,
 
 	mutex_lock(&df->lock);
 
-	for (i = 0; i < df->profile->max_state; i++)
+	for (i = 0; i < df->max_state; i++)
 		count += scnprintf(&buf[count], (PAGE_SIZE - count - 2),
-				"%lu ", df->profile->freq_table[i]);
+				"%lu ", df->freq_table[i]);
 
 	mutex_unlock(&df->lock);
 	/* Truncate the trailing space */
@@ -1690,7 +1689,7 @@ static ssize_t trans_stat_show(struct device *dev,
 
 	if (!df->profile)
 		return -EINVAL;
-	max_state = df->profile->max_state;
+	max_state = df->max_state;
 
 	if (max_state == 0)
 		return sprintf(buf, "Not Supported.\n");
@@ -1707,19 +1706,17 @@ static ssize_t trans_stat_show(struct device *dev,
 	len += sprintf(buf + len, "           :");
 	for (i = 0; i < max_state; i++)
 		len += sprintf(buf + len, "%10lu",
-				df->profile->freq_table[i]);
+				df->freq_table[i]);
 
 	len += sprintf(buf + len, "   time(ms)\n");
 
 	for (i = 0; i < max_state; i++) {
-		if (df->profile->freq_table[i]
-					== df->previous_freq) {
+		if (df->freq_table[i] == df->previous_freq)
 			len += sprintf(buf + len, "*");
-		} else {
+		else
 			len += sprintf(buf + len, " ");
-		}
-		len += sprintf(buf + len, "%10lu:",
-				df->profile->freq_table[i]);
+
+		len += sprintf(buf + len, "%10lu:", df->freq_table[i]);
 		for (j = 0; j < max_state; j++)
 			len += sprintf(buf + len, "%10u",
 				df->stats.trans_table[(i * max_state) + j]);
@@ -1743,7 +1740,7 @@ static ssize_t trans_stat_store(struct device *dev,
 	if (!df->profile)
 		return -EINVAL;
 
-	if (df->profile->max_state == 0)
+	if (df->max_state == 0)
 		return count;
 
 	err = kstrtoint(buf, 10, &value);
@@ -1751,11 +1748,11 @@ static ssize_t trans_stat_store(struct device *dev,
 		return -EINVAL;
 
 	mutex_lock(&df->lock);
-	memset(df->stats.time_in_state, 0, (df->profile->max_state *
+	memset(df->stats.time_in_state, 0, (df->max_state *
 					sizeof(*df->stats.time_in_state)));
 	memset(df->stats.trans_table, 0, array3_size(sizeof(unsigned int),
-					df->profile->max_state,
-					df->profile->max_state));
+					df->max_state,
+					df->max_state));
 	df->stats.total_trans = 0;
 	df->stats.last_update = get_jiffies_64();
 	mutex_unlock(&df->lock);
diff --git a/drivers/devfreq/governor_passive.c b/drivers/devfreq/governor_passive.c
index be8aa6830413..4ae880e171bc 100644
--- a/drivers/devfreq/governor_passive.c
+++ b/drivers/devfreq/governor_passive.c
@@ -131,18 +131,18 @@ static int get_target_freq_with_devfreq(struct devfreq *devfreq,
 		goto out;
 
 	/* Use interpolation if required opps is not available */
-	for (i = 0; i < parent_devfreq->profile->max_state; i++)
-		if (parent_devfreq->profile->freq_table[i] == *freq)
+	for (i = 0; i < parent_devfreq->max_state; i++)
+		if (parent_devfreq->freq_table[i] == *freq)
 			break;
 
-	if (i == parent_devfreq->profile->max_state)
+	if (i == parent_devfreq->max_state)
 		return -EINVAL;
 
-	if (i < devfreq->profile->max_state) {
-		child_freq = devfreq->profile->freq_table[i];
+	if (i < devfreq->max_state) {
+		child_freq = devfreq->freq_table[i];
 	} else {
-		count = devfreq->profile->max_state;
-		child_freq = devfreq->profile->freq_table[count - 1];
+		count = devfreq->max_state;
+		child_freq = devfreq->freq_table[count - 1];
 	}
 
 out:
diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h
index dc10bee75a72..770a7532655c 100644
--- a/include/linux/devfreq.h
+++ b/include/linux/devfreq.h
@@ -185,6 +185,10 @@ struct devfreq {
 	struct notifier_block nb;
 	struct delayed_work work;
 
+	/* devfreq local freq_table */
+	unsigned long *freq_table;
+	unsigned int max_state;
+
 	unsigned long previous_freq;
 	struct devfreq_dev_status last_status;
 
-- 
2.36.1

[PATCH v3 5/5] PM / devfreq: Mute warning on governor PROBE_DEFER

[Christian 'Ansuel' Marangi]

Don't print warning when a governor PROBE_DEFER as it's not a real
GOV_START fail.

Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
---
 drivers/devfreq/devfreq.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 2e2b3b414d67..df6972bb0ce8 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -931,8 +931,8 @@ struct devfreq *devfreq_add_device(struct device *dev,
 	err = devfreq->governor->event_handler(devfreq, DEVFREQ_GOV_START,
 						NULL);
 	if (err) {
-		dev_err(dev, "%s: Unable to start governor for the device\n",
-			__func__);
+		dev_err_probe(dev, -EPROBE_DEFER, "%s: Unable to start governor for the device\n",
+			      __func__);
 		goto err_init;
 	}
 	create_sysfs_files(devfreq, devfreq->governor);
-- 
2.36.1

Re: [PATCH v3 5/5] PM / devfreq: Mute warning on governor PROBE_DEFER

[Chanwoo Choi]

On 22. 6. 14. 20:07, Christian 'Ansuel' Marangi wrote:
> Don't print warning when a governor PROBE_DEFER as it's not a real
> GOV_START fail.
> 
> Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
> Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
> ---
>  drivers/devfreq/devfreq.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
> index 2e2b3b414d67..df6972bb0ce8 100644
> --- a/drivers/devfreq/devfreq.c
> +++ b/drivers/devfreq/devfreq.c
> @@ -931,8 +931,8 @@ struct devfreq *devfreq_add_device(struct device *dev,
>  	err = devfreq->governor->event_handler(devfreq, DEVFREQ_GOV_START,
>  						NULL);
>  	if (err) {
> -		dev_err(dev, "%s: Unable to start governor for the device\n",
> -			__func__);
> +		dev_err_probe(dev, -EPROBE_DEFER, "%s: Unable to start governor for the device\n",
> +			      __func__);

Should use 'err' instead of -EPROBE_DEFER and please this line
as following in order to keep the 80 line indentation.

+               dev_err_probe(dev, err,
+                       "%s: Unable to start governor for the device\n",
+                       __func__)



>  		goto err_init;
>  	}
>  	create_sysfs_files(devfreq, devfreq->governor);


-- 
Best Regards,
Samsung Electronics
Chanwoo Choi