linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: bbhatt@codeaurora.org
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
	jhugo@codeaurora.org, linux-kernel@vger.kernel.org,
	linux-kernel-owner@vger.kernel.org
Subject: Re: [PATCH v3 0/7] Introduce features and debugfs/sysfs entries for MHI
Date: Thu, 21 May 2020 12:33:46 -0700	[thread overview]
Message-ID: <dd9e53f10b2bcf5e022c4eb5d7dca824@codeaurora.org> (raw)
In-Reply-To: <20200521132318.GA3797@Mani-XPS-13-9360>

On 2020-05-21 06:23, Manivannan Sadhasivam wrote:
> Hi,
> 
> On Mon, May 18, 2020 at 01:03:54PM -0700, Bhaumik Bhatt wrote:
>> Introduce independent bus and device voting mechanism for clients and 
>> save
>> hardware information from BHI.
>> Allow reading and modifying some MHI variables for debug, test, and
>> informational purposes using debugfs.
>> Read values for device specific hardware information to be used by 
>> OEMs in
>> factory testing such as serial number and PK hash using sysfs.
>> 
> 
> I think this series is not yet ready. So will not merge any patches in 
> this
> series for 5.8.
> 
> Or let me know if there are any independent patches which should get 
> merged.
> I'm planning to send the final 5.8 series to Greg by Friday.
> 
> Thanks,
> Mani
> 
>> This set of patches was tested on arm64 and x86.
>> 
>> v3:
>> -Add patch to check for pending packets in suspend as a dependency for 
>> the
>> independent voting mechanism introduction
>> -Include register dump entry for debugfs to dump MHI, BHI, and BHIe 
>> registers
>> -Update commit message for the debugfs patch
>> -Updated Documentation/ABI with the required info for sysfs
>> -Updated debugfs patch to include a new KConfig entry and dependencies
>> -Updated reviewed-by for some patches
>> 
>> v2:
>> -Added a new debugfs.c file for specific debugfs entries and code
>> -Updated commit text and addressed some comments for voting change
>> -Made sure sysfs is only used for serial number and OEM PK hash usage
>> 
>> Bhaumik Bhatt (7):
>>   bus: mhi: core: Abort suspends due to outgoing pending packets
>>   bus: mhi: core: Introduce independent voting mechanism
>>   bus: mhi: core: Use generic name field for an MHI device
>>   bus: mhi: core: Introduce helper function to check device state
>>   bus: mhi: core: Introduce debugfs entries and counters for MHI
>>   bus: mhi: core: Read and save device hardware information from BHI
>>   bus: mhi: core: Introduce sysfs entries for MHI
>> 
>>  Documentation/ABI/stable/sysfs-bus-mhi |  25 ++
>>  MAINTAINERS                            |   1 +
>>  drivers/bus/mhi/Kconfig                |   8 +
>>  drivers/bus/mhi/core/Makefile          |   5 +-
>>  drivers/bus/mhi/core/boot.c            |  17 +-
>>  drivers/bus/mhi/core/debugfs.c         | 501 
>> +++++++++++++++++++++++++++++++++
>>  drivers/bus/mhi/core/init.c            |  80 +++++-
>>  drivers/bus/mhi/core/internal.h        |  29 ++
>>  drivers/bus/mhi/core/main.c            |   6 +-
>>  drivers/bus/mhi/core/pm.c              |  79 ++++--
>>  include/linux/mhi.h                    |  39 ++-
>>  11 files changed, 745 insertions(+), 45 deletions(-)
>>  create mode 100644 Documentation/ABI/stable/sysfs-bus-mhi
>>  create mode 100644 drivers/bus/mhi/core/debugfs.c
>> 
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>> a Linux Foundation Collaborative Project
Hi Mani,

These are patches already reviewed, small and important and good to go:

bus: mhi: core: Abort suspends due to outgoing pending packets
bus: mhi: core: Use generic name field for an MHI device
bus: mhi: core: Introduce helper function to check device state
bus: mhi: core: Read and save device hardware information from BHI

Please let us know if you have any concerns.

Thanks,
Bhaumik

      parent reply	other threads:[~2020-05-21 19:34 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-18 20:03 [PATCH v3 0/7] Introduce features and debugfs/sysfs entries for MHI Bhaumik Bhatt
2020-05-18 20:03 ` [PATCH v3 1/7] bus: mhi: core: Abort suspends due to outgoing pending packets Bhaumik Bhatt
2020-05-20 16:48   ` Jeffrey Hugo
2020-05-18 20:03 ` [PATCH v3 2/7] bus: mhi: core: Introduce independent voting mechanism Bhaumik Bhatt
2020-05-20 16:54   ` Jeffrey Hugo
2020-05-20 18:43     ` bbhatt
2020-05-20 19:06       ` Jeffrey Hugo
2020-05-20 19:44         ` bbhatt
2020-05-20 20:41           ` Jeffrey Hugo
2020-05-18 20:03 ` [PATCH v3 3/7] bus: mhi: core: Use generic name field for an MHI device Bhaumik Bhatt
2020-05-18 20:03 ` [PATCH v3 4/7] bus: mhi: core: Introduce helper function to check device state Bhaumik Bhatt
2020-05-18 20:03 ` [PATCH v3 5/7] bus: mhi: core: Introduce debugfs entries and counters for MHI Bhaumik Bhatt
2020-05-25  6:35   ` Greg KH
2020-05-18 20:04 ` [PATCH v3 6/7] bus: mhi: core: Read and save device hardware information from BHI Bhaumik Bhatt
2020-05-18 20:04 ` [PATCH v3 7/7] bus: mhi: core: Introduce sysfs entries for MHI Bhaumik Bhatt
2020-05-21 13:23 ` [PATCH v3 0/7] Introduce features and debugfs/sysfs " Manivannan Sadhasivam
2020-05-21 15:32   ` Manivannan Sadhasivam
2020-05-21 19:33   ` bbhatt [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=dd9e53f10b2bcf5e022c4eb5d7dca824@codeaurora.org \
    --to=bbhatt@codeaurora.org \
    --cc=hemantk@codeaurora.org \
    --cc=jhugo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel-owner@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).