From: "Ioan Ionita" <opslynx@gmail.com>
To: "Alan Cox" <alan@lxorguk.ukuu.org.uk>
Cc: "Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
htejun@gmail.com
Subject: Re: More JMicron troubles with 2.6.21
Date: Wed, 2 May 2007 15:29:52 -0400 [thread overview]
Message-ID: <df47b87a0705021229o6fb42d06ka8e37d1fdc32520a@mail.gmail.com> (raw)
In-Reply-To: <20070502201511.4c8085e9@the-village.bc.nu>
On 5/2/07, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> This is almost certainly a problem outside of the IDE handling in that
> case. The jmicron controllers are smart, there is basically no code to
> the IDE driver to go wrong (especially in the case of using the old IDE
> for the PATA port where you basically use zero code that hasn't been
> tested for years).
Could this be a hardware problem then? The CD-ROM is recognized by
BIOS and I'm able to boot bootable CDs fine.
Could it be a setting in BIOS? I did try to switch from Enhanced to
Compatible mode, but problem persists.
With the ide driver, the device is recognized, but when I attempt to
mount it, il times out, gets reset and my machine locks up at times.
>
> Do you get the odd timeout or continuous timeouts ?
With the pata_jmicron, the device is not recognized. I get the
timeouts only during the probing during the boot phase.
next prev parent reply other threads:[~2007-05-02 19:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-02 17:37 More JMicron troubles with 2.6.21 Ioan Ionita
2007-05-02 19:15 ` Alan Cox
2007-05-02 19:29 ` Ioan Ionita [this message]
2007-05-02 21:49 ` Mark Lord
2007-05-02 22:58 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=df47b87a0705021229o6fb42d06ka8e37d1fdc32520a@mail.gmail.com \
--to=opslynx@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=htejun@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox