From: Zenghui Yu <zenghui.yu@linux.dev>
To: "David Hildenbrand (Arm)" <david@kernel.org>
Cc: Zenghui Yu <yuzenghui@huawei.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org, jgg@ziepe.ca,
leon@kernel.org, Andrew Morton <akpm@linux-foundation.org>,
ljs@kernel.org, liam@infradead.org, vbabka@kernel.org,
rppt@kernel.org, surenb@google.com, mhocko@suse.com,
Alistair Popple <apopple@nvidia.com>
Subject: Re: "alloc_tag was not set" when running mm/ksft_hmm.sh
Date: Tue, 12 May 2026 00:38:36 +0800 [thread overview]
Message-ID: <dff84fe1-ae17-410a-93a2-c5fb921e7f8f@linux.dev> (raw)
In-Reply-To: <c16350fa-2f74-4517-8d97-4772def97b78@kernel.org>
Hi David,
On 5/11/26 8:47 PM, David Hildenbrand (Arm) wrote:
> On 5/11/26 14:19, Zenghui Yu wrote:
> > On 2026/5/8 19:53, David Hildenbrand (Arm) wrote:
> > > On 5/6/26 17:42, Zenghui Yu wrote:
> > > > Hi all,
> > > >
> > > > Running mm/ksft_hmm.sh triggers the following splat:
> > > >
> > > > ------------[ cut here ]------------
> > > > alloc_tag was not set
> > > > WARNING: ./include/linux/alloc_tag.h:164 at ___free_pages+0x2a0/0x2d0, CPU#5: hmm-tests/2020
> > > > Modules linked in: test_hmm rfkill drm backlight fuse
> > > > CPU: 5 UID: 0 PID: 2020 Comm: hmm-tests Kdump: loaded Not tainted 7.1.0-rc2-00099-gadc1e5c6203c-dirty #285 PREEMPT
> > > > Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-stable202408-prebuilt.qemu.org 08/13/2024
> > > > pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
> > > > pc : ___free_pages+0x2a0/0x2d0
> > > > lr : ___free_pages+0x2a0/0x2d0
> > > > sp : ffff80008345b530
> > > > x29: ffff80008345b530 x28: ffff80008345b700 x27: ffffffffbfff8040
> > > > x26: ffff0000c41cb360 x25: ffff0000c0c64008 x24: ffff800081aae400
> > > > x23: 05ffff0000000200 x22: 0000000000000000 x21: 0000000000000000
> > > > x20: fffffdffc5f20040 x19: 0000000000000000 x18: fffffffffffe7c78
> > > > x17: 0000000000000000 x16: 0000000000000000 x15: fffffffffffe7c98
> > > > x14: 00000000000001d1 x13: ffff8000818f3d58 x12: 0000000000000573
> > > > x11: fffffffffffe7c98 x10: ffff80008194bd58 x9 : 3ffffffffffff000
> > > > x8 : ffff8000818f3d58 x7 : ffff80008194bd58 x6 : 0000000000000000
> > > > x5 : ffff0001fedb1088 x4 : 0000000000000001 x3 : 0000000000000000
> > > > x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c7f58000
> > > > Call trace:
> > > > ___free_pages+0x2a0/0x2d0 (P)
> > > > __free_pages+0x14/0x20
> > > > dmirror_devmem_free+0x13c/0x158 [test_hmm]
> > > > free_zone_device_folio+0x144/0x1e4
> > > > __folio_put+0x124/0x130
> > > > free_folio_and_swap_cache+0xa8/0xcc
> > > > __folio_split+0x664/0x7fc
> > > > split_folio_to_list+0x50/0x5c
> > > > migrate_vma_split_folio+0x13c/0x25c
> > > > migrate_vma_collect_pmd+0xed4/0xf68
> > > > walk_pgd_range+0x598/0x9a0
> > > > __walk_page_range+0x90/0x1a0
> > > > walk_page_range_mm_unsafe+0x194/0x20c
> > > > walk_page_range+0x20/0x2c
> > > > migrate_vma_setup+0x18c/0x224
> > > > dmirror_devmem_fault+0x188/0x2b8 [test_hmm]
> > > > do_swap_page+0x1458/0x185c
> > > > __handle_mm_fault+0x85c/0x1ba0
> > > > handle_mm_fault+0xb0/0x290
> > > > do_page_fault+0x1f8/0x6f8
> > > > do_translation_fault+0x60/0x6c
> > > > do_mem_abort+0x44/0x94
> > > > el0_da+0x30/0xdc
> > > > el0t_64_sync_handler+0xd0/0xe4
> > > > el0t_64_sync+0x198/0x19c
> > > > ---[ end trace 0000000000000000 ]---
> > > > lib/test_hmm.c:705 module test_hmm func:dmirror_devmem_alloc_page has 16744448 allocated at module unload
> > > >
> > > >
> > > > It was tested on kernel built with arm64's virt.config and
> > > >
> > > > +CONFIG_ZONE_DEVICE=y
> > > > +CONFIG_DEVICE_PRIVATE=y
> > > > +CONFIG_TEST_HMM=m
> > > > +CONFIG_MEM_ALLOC_PROFILING=y
> > > > +CONFIG_MEM_ALLOC_PROFILING_DEBUG=y
> > >
> > > I assume there is a weird interaction between alloc tags and simulated
> > > ZONE_DEVICE memory in test_hmm.c
> >
> > FYI this can be reproduced by running the migrate_partial_unmap_fault
> > test case.
> >
> > TEST_F(hmm, migrate_partial_unmap_fault)
> > {
> > buffer->mirror = malloc(TWOMEG);
> > buffer->ptr = map; // points to a THP
> >
> > /* Initialize buffer in system memory. */
> > for (i = 0, ptr = buffer->ptr; i < TWOMEG / sizeof(*ptr); ++i)
> > ptr[i] = i;
> >
> > ret = hmm_migrate_sys_to_dev(self->fd, buffer, npages);
> >
> > munmap(buffer->ptr, ONEMEG);
> >
> > /* Fault pages back to system memory and check them. */
> > for (i = 0, ptr = buffer->ptr; i < TWOMEG / sizeof(*ptr); ++i)
> > if (i * sizeof(int) < 0 ||
> > i * sizeof(int) >= ONEMEG)
> > ASSERT_EQ(ptr[i], i); // triggers a fault ->
> >
> >
> > dmirror_devmem_fault()
> > migrate_vma_setup()
> > migrate_vma_collect_pmd()
> > // !pte_present(pte) && folio_test_large(folio)
> > migrate_vma_split_folio()
> > split_folio()
> > [...]
> >
> > __folio_split() {
> > unmap_folio();
> >
> > __folio_freeze_and_split_unmapped() {
> > __split_unmapped_folio();
> >
> > for (...) {
> > zone_device_private_split_cb(.., new_folio);
> > // -> dmirror_devmem_folio_split() which doesn't
> > // set alloc tag for the backing system memory
> > // page being split, i.e., rpage_tail
> > }
> >
> > zone_device_private_split_cb(.., NULL);
> > }
> >
> > remap_page();
> >
> > for (...)
> > free_folio_and_swap_cache(new_folio);
> > // -> dmirror_devmem_free()/__free_page() which warns if
> > // the page being freed doesn't have alloc tag set, in
> > // alloc_tag_sub_check().
> > }
> >
> > The WARN disappears with the following diff. But I'm not sure if I've
> > missed more important points (which is likely to happen ;-) ).
> >
> > diff --git a/lib/alloc_tag.c b/lib/alloc_tag.c
> > index ed1bdcf1f8ab..eefa2a739917 100644
> > --- a/lib/alloc_tag.c
> > +++ b/lib/alloc_tag.c
> > @@ -191,6 +191,7 @@ void pgalloc_tag_split(struct folio *folio, int old_order, int new_order)
> > }
> > }
> > }
> > +EXPORT_SYMBOL(pgalloc_tag_split);
> >
> > void pgalloc_tag_swap(struct folio *new, struct folio *old)
> > {
> > diff --git a/lib/test_hmm.c b/lib/test_hmm.c
> > index 213504915737..3bec51828916 100644
> > --- a/lib/test_hmm.c
> > +++ b/lib/test_hmm.c
> > @@ -1713,6 +1713,7 @@ static void dmirror_devmem_folio_split(struct folio *head, struct folio *tail)
> > rfolio = page_folio(rpage);
> >
> > if (tail == NULL) {
> > + pgalloc_tag_split(rfolio, folio_order(rfolio), 0);
> > folio_reset_order(rfolio);
> > rfolio->mapping = NULL;
> > folio_set_count(rfolio, 1);
>
>
> zone_device_private_split_cb(), that ends up calling ->folio_split().
>
> We do have a call to pgalloc_tag_split() in __split_unmapped_folio(), invoked in
> __folio_freeze_and_split_unmapped() before calling
> zone_device_private_split_cb() when iterating the folios.
If I read the code correctly, pgalloc_tag_split() in
__split_unmapped_folio() deals with device private pages' alloc tag. But
what alloc_tag_sub_check() warns on are real system memory pages (device
page's backing page), which are allocated by
dmirror_devmem_alloc_page()/folio_page().
static void dmirror_devmem_folio_split(struct folio *head, struct folio
*tail)
{
struct page *rpage = BACKING_PAGE(folio_page(head, 0));
Thanks,
Zenghui
> The zone_device_private_split_cb(folio, NULL); is then called on the first folio
> after looping over the other (new) folios.
>
> I would assume that __folio_freeze_and_split_unmapped() would already do the
> right thing?
>
> Maybe the issue is the hard-coded folio_reset_order() in
> dmirror_devmem_folio_split(), where we seem to assume that we split to an
> order-0 folio?
>
prev parent reply other threads:[~2026-05-11 16:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-06 15:42 "alloc_tag was not set" when running mm/ksft_hmm.sh Zenghui Yu
2026-05-08 11:53 ` David Hildenbrand (Arm)
2026-05-08 16:35 ` Alistair Popple
2026-05-11 12:19 ` Zenghui Yu
2026-05-11 12:47 ` David Hildenbrand (Arm)
2026-05-11 16:38 ` Zenghui Yu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dff84fe1-ae17-410a-93a2-c5fb921e7f8f@linux.dev \
--to=zenghui.yu@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=apopple@nvidia.com \
--cc=david@kernel.org \
--cc=jgg@ziepe.ca \
--cc=leon@kernel.org \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=mhocko@suse.com \
--cc=rppt@kernel.org \
--cc=surenb@google.com \
--cc=vbabka@kernel.org \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox