From: Dinh Nguyen <dinguyen@kernel.org>
To: niravkumar.l.rabara@intel.com
Cc: devicetree@vger.kernel.org, krzysztof.kozlowski+dt@linaro.org,
linux-kernel@vger.kernel.org, robh+dt@kernel.org
Subject: Re: [PATCHv3] arm64: dts: altera: socfpga_stratix10: move clocks out of soc node
Date: Fri, 24 Jun 2022 17:47:09 -0500 [thread overview]
Message-ID: <e07e2591-6913-cb51-021b-125c3c60b2fc@kernel.org> (raw)
In-Reply-To: <20220624162159.3403541-1-niravkumar.l.rabara@intel.com>
On 6/24/22 11:21, niravkumar.l.rabara@intel.com wrote:
> From: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
>
> The clocks are not part of the SoC but provided on the board
> (external oscillators). Moving them out of soc node.
>
> Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
> ---
> .../boot/dts/altera/socfpga_stratix10.dtsi | 56 +++++++++----------
> .../dts/altera/socfpga_stratix10_socdk.dts | 10 ++--
> .../altera/socfpga_stratix10_socdk_nand.dts | 10 ++--
> 3 files changed, 36 insertions(+), 40 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
> index aa2bba75265f..5c7d926d18f7 100644
> --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
> +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
> @@ -97,6 +97,34 @@ intc: interrupt-controller@fffc1000 {
> <0x0 0xfffc6000 0x0 0x2000>;
> };
>
> + clocks {
> + cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + };
> +
> + cb_intosc_ls_clk: cb-intosc-ls-clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + };
> +
> + f2s_free_clk: f2s-free-clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + };
> +
> + osc1: osc1 {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + };
> +
> + qspi_clk: qspi-clk {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <200000000>;
> + };
> + };
> +
> soc {
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -119,34 +147,6 @@ clkmgr: clock-controller@ffd10000 {
> #clock-cells = <1>;
> };
>
> - clocks {
> - cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - };
> -
> - cb_intosc_ls_clk: cb-intosc-ls-clk {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - };
> -
> - f2s_free_clk: f2s-free-clk {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - };
> -
> - osc1: osc1 {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - };
> -
> - qspi_clk: qspi-clk {
> - #clock-cells = <0>;
> - compatible = "fixed-clock";
> - clock-frequency = <200000000>;
> - };
> - };
> -
> gmac0: ethernet@ff800000 {
> compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
> reg = <0xff800000 0x2000>;
> diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
> index 5159cd5771dc..48424e459f12 100644
> --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
> +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
> @@ -52,12 +52,6 @@ ref_033v: regulator-v-ref {
> };
>
> soc {
> - clocks {
> - osc1 {
> - clock-frequency = <25000000>;
> - };
> - };
> -
> eccmgr {
> sdmmca-ecc@ff8c8c00 {
> compatible = "altr,socfpga-s10-sdmmc-ecc",
> @@ -113,6 +107,10 @@ &mmc {
> bus-width = <4>;
> };
>
> +&osc1 {
> + clock-frequency = <25000000>;
> +};
> +
> &uart0 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
> index 0ab676c639a1..847a7c01f5af 100644
> --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
> +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
> @@ -52,12 +52,6 @@ ref_033v: regulator-v-ref {
> };
>
> soc {
> - clocks {
> - osc1 {
> - clock-frequency = <25000000>;
> - };
> - };
> -
> eccmgr {
> sdmmca-ecc@ff8c8c00 {
> compatible = "altr,socfpga-s10-sdmmc-ecc",
> @@ -126,6 +120,10 @@ partition@200000 {
> };
> };
>
> +&osc1 {
> + clock-frequency = <25000000>;
> +};
> +
> &uart0 {
> status = "okay";
> };
Applied!
Thanks,
Dinh
prev parent reply other threads:[~2022-06-24 22:47 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-23 2:42 [PATCH] arm64: dts: altera: socfpga_stratix10: move clocks out of soc node niravkumar.l.rabara
2022-06-23 16:16 ` Dinh Nguyen
2022-06-23 19:07 ` Dinh Nguyen
2022-06-24 3:10 ` niravkumar.l.rabara
2022-06-24 11:59 ` niravkumar.l.rabara
2022-06-24 14:49 ` Dinh Nguyen
2022-06-24 16:21 ` [PATCHv3] " niravkumar.l.rabara
2022-06-24 22:47 ` Dinh Nguyen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e07e2591-6913-cb51-021b-125c3c60b2fc@kernel.org \
--to=dinguyen@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=niravkumar.l.rabara@intel.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox