From: johannes.goede@oss.qualcomm.com
To: Arun T <arun.t@intel.com>
Cc: sakari.ailus@linux.intel.com, arec.kao@intel.com,
ilpo.jarvinen@linux.intel.com, dan.scally@ideasonboard.com,
platform-driver-x86@vger.kernel.org, linux-media@vger.kernel.org,
linux-kernel@vger.kernel.org, mehdi.djait@intel.com
Subject: Re: [PATCH v6 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl
Date: Sat, 28 Mar 2026 12:50:43 +0100 [thread overview]
Message-ID: <e0d704f8-180c-4167-90f0-a9052d8f85b3@oss.qualcomm.com> (raw)
In-Reply-To: <20260327181959.3528753-2-arun.t@intel.com>
Hi,
On 27-Mar-26 19:19, Arun T wrote:
> The Intel NVL platform uses IPU8 is powered by a TPS68470 PMIC,requiring board
> data to configure the GPIOs and regulators for proper camera sensor operation.
>
> Signed-off-by: Arun T <arun.t@intel.com>
> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Thanks, patch looks good to me:
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Regards,
Hans
> ---
> .../x86/intel/int3472/tps68470_board_data.c | 121 ++++++++++++++++++
> 1 file changed, 121 insertions(+)
>
> diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> index 71357a036292..f0309fd1e515 100644
> --- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> @@ -143,6 +143,20 @@ static struct regulator_consumer_supply int3479_aux2_consumer_supplies[] = {
> REGULATOR_SUPPLY("dovdd", "i2c-INT3479:00"),
> };
>
> +/* Settings for Intel NVL platform */
> +
> +static struct regulator_consumer_supply ovti13b1_core_consumer_supplies[] = {
> + REGULATOR_SUPPLY("dvdd", "i2c-OVTI13B1:01"),
> +};
> +
> +static struct regulator_consumer_supply ovti13b1_ana_consumer_supplies[] = {
> + REGULATOR_SUPPLY("avdd", "i2c-OVTI13B1:01"),
> +};
> +
> +static struct regulator_consumer_supply ovti13b1_vsio_consumer_supplies[] = {
> + REGULATOR_SUPPLY("dovdd", "i2c-OVTI13B1:01"),
> +};
> +
> static const struct regulator_init_data dell_7212_tps68470_core_reg_init_data = {
> .constraints = {
> .min_uV = 1200000,
> @@ -220,6 +234,77 @@ static const struct regulator_init_data dell_7212_tps68470_aux2_reg_init_data =
> .consumer_supplies = int3479_aux2_consumer_supplies,
> };
>
> +static const struct regulator_init_data intel_nvl_tps68470_core_reg_init_data = {
> + .constraints = {
> + .min_uV = 1200000,
> + .max_uV = 1200000,
> + .apply_uV = true,
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(ovti13b1_core_consumer_supplies),
> + .consumer_supplies = ovti13b1_core_consumer_supplies,
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_ana_reg_init_data = {
> + .constraints = {
> + .min_uV = 2815200,
> + .max_uV = 2815200,
> + .apply_uV = true,
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(ovti13b1_ana_consumer_supplies),
> + .consumer_supplies = ovti13b1_ana_consumer_supplies,
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_vcm_reg_init_data = {
> + .constraints = {
> + .min_uV = 2815200,
> + .max_uV = 2815200,
> + .apply_uV = true,
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> +
> +};
> +
> +/* Ensure the always-on VIO regulator has the same voltage as VSIO */
> +static const struct regulator_init_data intel_nvl_tps68470_vio_reg_init_data = {
> + .constraints = {
> + .min_uV = 1800600,
> + .max_uV = 1800600,
> + .apply_uV = true,
> + .always_on = true,
> + },
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_vsio_reg_init_data = {
> + .constraints = {
> + .min_uV = 1800600,
> + .max_uV = 1800600,
> + .apply_uV = true,
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(ovti13b1_vsio_consumer_supplies),
> + .consumer_supplies = ovti13b1_vsio_consumer_supplies,
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_aux1_reg_init_data = {
> + .constraints = {
> + .min_uV = 2815200,
> + .max_uV = 2815200,
> + .apply_uV = 1,
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> +};
> +
> +static const struct regulator_init_data intel_nvl_tps68470_aux2_reg_init_data = {
> + .constraints = {
> + .min_uV = 1800600,
> + .max_uV = 1800600,
> + .apply_uV = 1,
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> +};
> +
> static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata = {
> .reg_init_data = {
> [TPS68470_CORE] = &dell_7212_tps68470_core_reg_init_data,
> @@ -232,6 +317,18 @@ static const struct tps68470_regulator_platform_data dell_7212_tps68470_pdata =
> },
> };
>
> +static const struct tps68470_regulator_platform_data intel_nvl_tps68470_pdata = {
> + .reg_init_data = {
> + [TPS68470_CORE] = &intel_nvl_tps68470_core_reg_init_data,
> + [TPS68470_ANA] = &intel_nvl_tps68470_ana_reg_init_data,
> + [TPS68470_VCM] = &intel_nvl_tps68470_vcm_reg_init_data,
> + [TPS68470_VIO] = &intel_nvl_tps68470_vio_reg_init_data,
> + [TPS68470_VSIO] = &intel_nvl_tps68470_vsio_reg_init_data,
> + [TPS68470_AUX1] = &intel_nvl_tps68470_aux1_reg_init_data,
> + [TPS68470_AUX2] = &intel_nvl_tps68470_aux2_reg_init_data,
> + },
> +};
> +
> static struct gpiod_lookup_table surface_go_int347a_gpios = {
> .dev_id = "i2c-INT347A:00",
> .table = {
> @@ -258,6 +355,14 @@ static struct gpiod_lookup_table dell_7212_int3479_gpios = {
> }
> };
>
> +static struct gpiod_lookup_table intel_nvl_ovti13b1_gpios = {
> + .dev_id = "i2c-OVTI13B1:01",
> + .table = {
> + GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW),
> + { }
> + }
> +};
> +
> static const struct int3472_tps68470_board_data surface_go_tps68470_board_data = {
> .dev_name = "i2c-INT3472:05",
> .tps68470_regulator_pdata = &surface_go_tps68470_pdata,
> @@ -287,6 +392,15 @@ static const struct int3472_tps68470_board_data dell_7212_tps68470_board_data =
> },
> };
>
> +static const struct int3472_tps68470_board_data intel_nvl_tps68470_board_data = {
> + .dev_name = "i2c-INT3472:04",
> + .tps68470_regulator_pdata = &intel_nvl_tps68470_pdata,
> + .n_gpiod_lookups = 1,
> + .tps68470_gpio_lookup_tables = {
> + &intel_nvl_ovti13b1_gpios,
> + },
> +};
> +
> static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
> {
> .matches = {
> @@ -316,6 +430,13 @@ static const struct dmi_system_id int3472_tps68470_board_data_table[] = {
> },
> .driver_data = (void *)&dell_7212_tps68470_board_data,
> },
> + {
> + .matches = {
> + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"),
> + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Nova Lake Client Platform"),
> + },
> + .driver_data = (void *)&intel_nvl_tps68470_board_data,
> + },
> { }
> };
>
next prev parent reply other threads:[~2026-03-28 11:50 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-27 18:19 [PATCH v6 0/2] Add TPS68470 power supply support for ov13b10 sensor Arun T
2026-03-27 18:19 ` [PATCH v6 1/2] platform/x86: int3472: Add TPS68470 board data for Intel nvl Arun T
2026-03-28 11:50 ` johannes.goede [this message]
2026-03-31 11:26 ` Sakari Ailus
2026-04-01 6:43 ` T, Arun
2026-04-01 12:32 ` T, Arun
2026-03-27 18:19 ` [PATCH v6 2/2] media: ov13b10: Support multiple regulators Arun T
2026-03-28 11:50 ` johannes.goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e0d704f8-180c-4167-90f0-a9052d8f85b3@oss.qualcomm.com \
--to=johannes.goede@oss.qualcomm.com \
--cc=arec.kao@intel.com \
--cc=arun.t@intel.com \
--cc=dan.scally@ideasonboard.com \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mehdi.djait@intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox