[PATCH v3 00/13] Enable display support for STM32MP25

[PATCH v3 00/13] Enable display support for STM32MP25

[Raphael Gallais-Pou]

This series aims to add and enable sufficient LVDS display support for
STM32MP257F-EV1 board.

LVDS is the default use case to drive a display panel on STM32MP257F-EV,
even though DSI panels will be supported in the near future.

The LTDC needs a pixel rate in sync with the bridge currently in use.
For that both DSI and LVDS bridges need to declare an internal clock and
become clock provider to the mux. The mux then selects the reference
clock for the LTDC pixel rate generation.

For now this mux is handled internally in the LTDC, while waiting for
the STM32 clock framework to merge a 'clk-mux' based on the SYSCFG.
This explains the link done in the patch [7/8] between the LVDS,
providing the reference clock for the LTDC internals.

  +----------+              |\
  |  DSI PHY |------------->| \           +------------+
  |          |ck_dsi_phy    |  |          |            |
  +----------+              |  |--------->|    LTDC    |
  +----------+              |  |pixel_clk |            |
  | LVDS PHY |------------->|  |          +------------+
  |          |clk_pix_lvds  |  |
  +----------+              |  |
                            |  |
   ck_ker_ltdc ------------>| /
                            |/|
                              └- SYSCFG

Clock selection applies as follow:
- 0b00: Selects ck_dsi_phy
- 0b01: Selects clk_pix_lvds
- 0b10: Selects ck_ker_ltdc (for parallel or DSI display).
- 0b11: Reserved

The reset value of the register controlling the mux is 0b01, meaning
that the default clock assigned is the clk_pix_lvds.  This causes two
things:

- In order to get basic display on the LVDS encoder, like intended,
nothing has to be done on this mux within the LTDC driver (which for now
explains the unused syscfg phandle on the LTDC node in the device-tree).

- 'pixel_clk' is dependent from 'clk_pix_lvds' because of the LTDC clock
domains.  They also need to be sync to get a coherent pixel rate though
the display clock tree (which explains the LVDS phandle on the LTDC node
in the device-tree).

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
Changes in v3:
- Rebased on latest drm-misc-next
- Documentation:
  - LTDC: Clamp correctly min/maxItems value
  - LVDS: Remove second 'items' keyword
- Add Krzysztof's trailer where relevant
- Link to v2: https://lore.kernel.org/r/20250812-drm-misc-next-v2-0-132fd84463d7@foss.st.com

Changes in v2:
- Documentation:
  - Add support for new compatible "st,stm32mp255-lvds"
  - Change LTDC compatible for SoC compliant one
  - Make clearer LTDC clock-names property
- Devicetree:
  - Change compatible according to the documentation
  - Change clock and clock-names order to match documentation (and avoid
    warnings)
- Drivers:
  - Change LTDC compatible
- Add Rob's trailer where relevant
- Link to v1: https://lore.kernel.org/r/20250725-drm-misc-next-v1-0-a59848e62cf9@foss.st.com

---
Raphael Gallais-Pou (11):
      dt-bindings: display: st: add new compatible to LTDC device
      dt-bindings: display: st,stm32-ltdc: add access-controllers property
      dt-bindings: display: st: add new compatible to LVDS device
      dt-bindings: display: st,stm32mp25-lvds: add access-controllers property
      dt-bindings: display: st,stm32mp25-lvds: add power-domains property
      dt-bindings: arm: stm32: add required #clock-cells property
      arm64: dts: st: add ltdc support on stm32mp251
      arm64: dts: st: add lvds support on stm32mp255
      arm64: dts: st: add clock-cells to syscfg node on stm32mp251
      arm64: dts: st: enable display support on stm32mp257f-ev1 board
      arm64: dts: st: add loopback clocks on LTDC node

Yannick Fertre (2):
      drm/stm: ltdc: support new hardware version for STM32MP25 SoC
      drm/stm: ltdc: handle lvds pixel clock

 .../bindings/arm/stm32/st,stm32-syscon.yaml        | 31 ++++++---
 .../devicetree/bindings/display/st,stm32-ltdc.yaml | 33 ++++++++-
 .../bindings/display/st,stm32mp25-lvds.yaml        | 13 +++-
 arch/arm64/boot/dts/st/stm32mp251.dtsi             | 19 ++++++
 arch/arm64/boot/dts/st/stm32mp255.dtsi             | 19 +++++-
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts         | 79 ++++++++++++++++++++++
 drivers/gpu/drm/stm/drv.c                          | 11 ++-
 drivers/gpu/drm/stm/ltdc.c                         | 57 +++++++++++++++-
 drivers/gpu/drm/stm/ltdc.h                         |  6 ++
 9 files changed, 250 insertions(+), 18 deletions(-)
---
base-commit: c8cea4371e5eca30cda8660aabb337747dabc51d
change-id: 20250617-drm-misc-next-4af406c1c45f

Best regards,
-- 
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>

[PATCH v3 01/13] dt-bindings: display: st: add new compatible to LTDC device

[Raphael Gallais-Pou]

The new STMicroelectronics SoC features a display controller similar to
the one used in previous SoCs.  Because there is additional registers,
it is incompatible with existing IPs.

Add the new name to the list of compatible string.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 .../devicetree/bindings/display/st,stm32-ltdc.yaml | 30 ++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
index d6ea4d62a2cfae26353c9f20a326a4329fed3a2f..4a227799717637df882170ec08c0a8e88ac430ab 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -12,7 +12,9 @@ maintainers:
 
 properties:
   compatible:
-    const: st,stm32-ltdc
+    enum:
+      - st,stm32-ltdc
+      - st,stm32mp251-ltdc
 
   reg:
     maxItems: 1
@@ -24,11 +26,16 @@ properties:
     minItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 4
 
   clock-names:
     items:
       - const: lcd
+      - const: bus
+      - const: ref
+      - const: lvds
+    minItems: 1
 
   resets:
     maxItems: 1
@@ -51,6 +58,25 @@ required:
   - resets
   - port
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - st,stm32-ltdc
+then:
+  properties:
+    clocks:
+      maxItems: 1
+    clock-names:
+      maxItems: 1
+else:
+  properties:
+    clocks:
+      minItems: 4
+    clock-names:
+      minItems: 4
+
 additionalProperties: false
 
 examples:

-- 
2.25.1

Re: [PATCH v3 01/13] dt-bindings: display: st: add new compatible to LTDC device

[Rob Herring (Arm)]

On Tue, 19 Aug 2025 11:15:54 +0200, Raphael Gallais-Pou wrote:
> The new STMicroelectronics SoC features a display controller similar to
> the one used in previous SoCs.  Because there is additional registers,
> it is incompatible with existing IPs.
> 
> Add the new name to the list of compatible string.
> 
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> ---
>  .../devicetree/bindings/display/st,stm32-ltdc.yaml | 30 ++++++++++++++++++++--
>  1 file changed, 28 insertions(+), 2 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250819-drm-misc-next-v3-1-04153978ebdb@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v3 01/13] dt-bindings: display: st: add new compatible to LTDC device

[Raphael Gallais-Pou]

On 8/19/25 13:01, Rob Herring (Arm) wrote:
> On Tue, 19 Aug 2025 11:15:54 +0200, Raphael Gallais-Pou wrote:
>> The new STMicroelectronics SoC features a display controller similar to
>> the one used in previous SoCs.  Because there is additional registers,
>> it is incompatible with existing IPs.
>>
>> Add the new name to the list of compatible string.
>>
>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>> ---
>>  .../devicetree/bindings/display/st,stm32-ltdc.yaml | 30 ++++++++++++++++++++--
>>  1 file changed, 28 insertions(+), 2 deletions(-)

Hi Rob,

It seems several patches of this series triggered your bot without
warnings/errors messages.

Did I missed something or is it just a glitch in the matrix ? :)

Best regards,
Raphaël
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
>
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250819-drm-misc-next-v3-1-04153978ebdb@foss.st.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>

Re: [PATCH v3 01/13] dt-bindings: display: st: add new compatible to LTDC device

[Rob Herring]

On Tue, Aug 19, 2025 at 03:17:46PM +0200, Raphael Gallais-Pou wrote:
> 
> 
> On 8/19/25 13:01, Rob Herring (Arm) wrote:
> > On Tue, 19 Aug 2025 11:15:54 +0200, Raphael Gallais-Pou wrote:
> >> The new STMicroelectronics SoC features a display controller similar to
> >> the one used in previous SoCs.  Because there is additional registers,
> >> it is incompatible with existing IPs.
> >>
> >> Add the new name to the list of compatible string.
> >>
> >> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> >> ---
> >>  .../devicetree/bindings/display/st,stm32-ltdc.yaml | 30 ++++++++++++++++++++--
> >>  1 file changed, 28 insertions(+), 2 deletions(-)
> 
> Hi Rob,
> 
> It seems several patches of this series triggered your bot without
> warnings/errors messages.
> 
> Did I missed something or is it just a glitch in the matrix ? :)

'make dt_binding_check' is broken in linux-next which is used if the 
base commit is not specified or not found. The latter was the case here. 
Should be fixed in tomorrow's linux-next.

Rob

Re: [PATCH v3 01/13] dt-bindings: display: st: add new compatible to LTDC device

[Raphael Gallais-Pou]

On 8/19/25 15:58, Rob Herring wrote:
> On Tue, Aug 19, 2025 at 03:17:46PM +0200, Raphael Gallais-Pou wrote:
>>
>> On 8/19/25 13:01, Rob Herring (Arm) wrote:
>>> On Tue, 19 Aug 2025 11:15:54 +0200, Raphael Gallais-Pou wrote:
>>>> The new STMicroelectronics SoC features a display controller similar to
>>>> the one used in previous SoCs.  Because there is additional registers,
>>>> it is incompatible with existing IPs.
>>>>
>>>> Add the new name to the list of compatible string.
>>>>
>>>> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
>>>> ---
>>>>  .../devicetree/bindings/display/st,stm32-ltdc.yaml | 30 ++++++++++++++++++++--
>>>>  1 file changed, 28 insertions(+), 2 deletions(-)
>> Hi Rob,
>>
>> It seems several patches of this series triggered your bot without
>> warnings/errors messages.
>>
>> Did I missed something or is it just a glitch in the matrix ? :)
> 'make dt_binding_check' is broken in linux-next which is used if the 
> base commit is not specified or not found. The latter was the case here. 
> Should be fixed in tomorrow's linux-next.

Indeed, I am based on latest drm-misc-next, which explains the not found base
commit.

Thanks for this info

Raphaël
>
> Rob

Re: [PATCH v3 01/13] dt-bindings: display: st: add new compatible to LTDC device

[Rob Herring (Arm)]

On Tue, 19 Aug 2025 11:15:54 +0200, Raphael Gallais-Pou wrote:
> The new STMicroelectronics SoC features a display controller similar to
> the one used in previous SoCs.  Because there is additional registers,
> it is incompatible with existing IPs.
> 
> Add the new name to the list of compatible string.
> 
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> ---
>  .../devicetree/bindings/display/st,stm32-ltdc.yaml | 30 ++++++++++++++++++++--
>  1 file changed, 28 insertions(+), 2 deletions(-)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH v3 02/13] dt-bindings: display: st,stm32-ltdc: add access-controllers property

[Raphael Gallais-Pou]

access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).

This property is added when the peripheral is under the STM32 firewall
controller.  It allows an accurate representation of the hardware, where
the peripheral is connected to a firewall bus.  The firewall can then check
the peripheral accesses before allowing its device to probe.

Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
index 4a227799717637df882170ec08c0a8e88ac430ab..d432983a8b20b6e482b411ad0254884d92848d8c 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -40,6 +40,9 @@ properties:
   resets:
     maxItems: 1
 
+  access-controllers:
+    maxItems: 1
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     description: |

-- 
2.25.1

Re: [PATCH v3 02/13] dt-bindings: display: st,stm32-ltdc: add access-controllers property

[Rob Herring (Arm)]

On Tue, 19 Aug 2025 11:15:55 +0200, Raphael Gallais-Pou wrote:
> access-controllers is an optional property that allows a peripheral to
> refer to one or more domain access controller(s).
> 
> This property is added when the peripheral is under the STM32 firewall
> controller.  It allows an accurate representation of the hardware, where
> the peripheral is connected to a firewall bus.  The firewall can then check
> the peripheral accesses before allowing its device to probe.
> 
> Acked-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> ---
>  Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250819-drm-misc-next-v3-2-04153978ebdb@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

[PATCH v3 03/13] dt-bindings: display: st: add new compatible to LVDS device

[Raphael Gallais-Pou]

Update the compatible to accept both "st,stm32mp255-lvds" and
st,stm32mp25-lvds" respectively.  Default will fall back to
"st,stm32mp25-lvds".

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
index 6736f93256b5cebb558cda5250369ec4b1b3033c..74e61d95370c299130410cdaae833514324c3e8f 100644
--- a/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
@@ -31,7 +31,12 @@ description: |
 
 properties:
   compatible:
-    const: st,stm32mp25-lvds
+    oneOf:
+      - items:
+          - enum:
+              - st,stm32mp255-lvds
+          - const: st,stm32mp25-lvds
+      - const: st,stm32mp25-lvds
 
   "#clock-cells":
     const: 0

-- 
2.25.1

Re: [PATCH v3 03/13] dt-bindings: display: st: add new compatible to LVDS device

[Rob Herring (Arm)]

On Tue, 19 Aug 2025 11:15:56 +0200, Raphael Gallais-Pou wrote:
> Update the compatible to accept both "st,stm32mp255-lvds" and
> st,stm32mp25-lvds" respectively.  Default will fall back to
> "st,stm32mp25-lvds".
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> ---
>  Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250819-drm-misc-next-v3-3-04153978ebdb@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

[PATCH v3 04/13] dt-bindings: display: st,stm32mp25-lvds: add access-controllers property

[Raphael Gallais-Pou]

access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).

This property is added when the peripheral is under the STM32 firewall
controller.  It allows an accurate representation of the hardware, where
the peripheral is connected to a firewall bus.  The firewall can then
check the peripheral accesses before allowing its device to probe.

Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
index 74e61d95370c299130410cdaae833514324c3e8f..05a73bbc246a8994b6aabf7c2cd9dca773232be4 100644
--- a/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
@@ -59,6 +59,9 @@ properties:
   resets:
     maxItems: 1
 
+  access-controllers:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 

-- 
2.25.1

Re: [PATCH v3 04/13] dt-bindings: display: st,stm32mp25-lvds: add access-controllers property

[Rob Herring (Arm)]

On Tue, 19 Aug 2025 11:15:57 +0200, Raphael Gallais-Pou wrote:
> access-controllers is an optional property that allows a peripheral to
> refer to one or more domain access controller(s).
> 
> This property is added when the peripheral is under the STM32 firewall
> controller.  It allows an accurate representation of the hardware, where
> the peripheral is connected to a firewall bus.  The firewall can then
> check the peripheral accesses before allowing its device to probe.
> 
> Acked-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> ---
>  Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250819-drm-misc-next-v3-4-04153978ebdb@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

[PATCH v3 05/13] dt-bindings: display: st,stm32mp25-lvds: add power-domains property

[Raphael Gallais-Pou]

STM32 LVDS peripheral may be in a power domain.  Allow an optional
single 'power-domains' entry for STM32 LVDS devices.

Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
index 05a73bbc246a8994b6aabf7c2cd9dca773232be4..14e042156179cb2f2d906422eaff6840da3c91ea 100644
--- a/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml
@@ -62,6 +62,9 @@ properties:
   access-controllers:
     maxItems: 1
 
+  power-domains:
+    maxItems: 1
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 

-- 
2.25.1

Re: [PATCH v3 05/13] dt-bindings: display: st,stm32mp25-lvds: add power-domains property

[Rob Herring (Arm)]

On Tue, 19 Aug 2025 11:15:58 +0200, Raphael Gallais-Pou wrote:
> STM32 LVDS peripheral may be in a power domain.  Allow an optional
> single 'power-domains' entry for STM32 LVDS devices.
> 
> Acked-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> ---
>  Documentation/devicetree/bindings/display/st,stm32mp25-lvds.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250819-drm-misc-next-v3-5-04153978ebdb@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

[PATCH v3 06/13] dt-bindings: arm: stm32: add required #clock-cells property

[Raphael Gallais-Pou]

On STM32MP25 SoC, the syscfg peripheral provides a clock to the display
subsystem through a multiplexer.  Since it only provides a single clock,
the cell value is 0.

Doing so allows the clock consumers to reach the peripheral and gate the
clock accordingly.

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 .../bindings/arm/stm32/st,stm32-syscon.yaml        | 31 +++++++++++++++-------
 1 file changed, 21 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index ed97652c84922813e94b1818c07fe8714891c089..95d2319afe235fa86974d80f89c9deeae2275232 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -36,20 +36,31 @@ properties:
   clocks:
     maxItems: 1
 
+  "#clock-cells":
+    const: 0
+
 required:
   - compatible
   - reg
 
-if:
-  properties:
-    compatible:
-      contains:
-        enum:
-          - st,stm32mp157-syscfg
-          - st,stm32f4-gcan
-then:
-  required:
-    - clocks
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - st,stm32mp157-syscfg
+              - st,stm32f4-gcan
+    then:
+      required:
+        - clocks
+  - if:
+      properties:
+        compatible:
+          const: st,stm32mp25-syscfg
+    then:
+      required:
+        - "#clock-cells"
 
 additionalProperties: false
 

-- 
2.25.1

Re: [PATCH v3 06/13] dt-bindings: arm: stm32: add required #clock-cells property

[Rob Herring (Arm)]

On Tue, 19 Aug 2025 11:15:59 +0200, Raphael Gallais-Pou wrote:
> On STM32MP25 SoC, the syscfg peripheral provides a clock to the display
> subsystem through a multiplexer.  Since it only provides a single clock,
> the cell value is 0.
> 
> Doing so allows the clock consumers to reach the peripheral and gate the
> clock accordingly.
> 
> Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
> Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
> ---
>  .../bindings/arm/stm32/st,stm32-syscon.yaml        | 31 +++++++++++++++-------
>  1 file changed, 21 insertions(+), 10 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250819-drm-misc-next-v3-6-04153978ebdb@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

[PATCH v3 07/13] drm/stm: ltdc: support new hardware version for STM32MP25 SoC

[Raphael Gallais-Pou]

From: Yannick Fertre <yannick.fertre@foss.st.com>

STM32MP25 SoC features a new version of the LTDC IP.  Add its compatible
to the list of device to probe and implement its quirks.

This hardware supports a pad frequency of 150MHz and a peripheral bus
clock.

Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 drivers/gpu/drm/stm/drv.c  | 11 ++++++++++-
 drivers/gpu/drm/stm/ltdc.c | 37 ++++++++++++++++++++++++++++++++++---
 drivers/gpu/drm/stm/ltdc.h |  5 +++++
 3 files changed, 49 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
index 8ebcaf953782d806a738d5a41ff1f428b0ccff78..8bfdeb486862a95df77427d25ce373e69e886c01 100644
--- a/drivers/gpu/drm/stm/drv.c
+++ b/drivers/gpu/drm/stm/drv.c
@@ -236,8 +236,17 @@ static void stm_drm_platform_shutdown(struct platform_device *pdev)
 	drm_atomic_helper_shutdown(platform_get_drvdata(pdev));
 }
 
+static struct ltdc_plat_data stm_drm_plat_data = {
+	.pad_max_freq_hz = 90000000,
+};
+
+static struct ltdc_plat_data stm_drm_plat_data_mp25 = {
+	.pad_max_freq_hz = 150000000,
+};
+
 static const struct of_device_id drv_dt_ids[] = {
-	{ .compatible = "st,stm32-ltdc"},
+	{ .compatible = "st,stm32-ltdc", .data = &stm_drm_plat_data, },
+	{ .compatible = "st,stm32mp251-ltdc", .data = &stm_drm_plat_data_mp25, },
 	{ /* end node */ },
 };
 MODULE_DEVICE_TABLE(of, drv_dt_ids);
diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index ba315c66a04d72758b9d3cfcd842432877f66d3a..74e93f076b62a46e7835985d9d330ba66d990e58 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -14,6 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/media-bus-format.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/of_graph.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
@@ -51,6 +52,7 @@
 #define HWVER_10300 0x010300
 #define HWVER_20101 0x020101
 #define HWVER_40100 0x040100
+#define HWVER_40101 0x040101
 
 /*
  * The address of some registers depends on the HW version: such registers have
@@ -1779,6 +1781,7 @@ static int ltdc_get_caps(struct drm_device *ddev)
 {
 	struct ltdc_device *ldev = ddev->dev_private;
 	u32 bus_width_log2, lcr, gc2r;
+	const struct ltdc_plat_data *pdata = of_device_get_match_data(ddev->dev);
 
 	/*
 	 * at least 1 layer must be managed & the number of layers
@@ -1794,6 +1797,8 @@ static int ltdc_get_caps(struct drm_device *ddev)
 	ldev->caps.bus_width = 8 << bus_width_log2;
 	regmap_read(ldev->regmap, LTDC_IDR, &ldev->caps.hw_version);
 
+	ldev->caps.pad_max_freq_hz = pdata->pad_max_freq_hz;
+
 	switch (ldev->caps.hw_version) {
 	case HWVER_10200:
 	case HWVER_10300:
@@ -1811,7 +1816,6 @@ static int ltdc_get_caps(struct drm_device *ddev)
 		 * does not work on 2nd layer.
 		 */
 		ldev->caps.non_alpha_only_l1 = true;
-		ldev->caps.pad_max_freq_hz = 90000000;
 		if (ldev->caps.hw_version == HWVER_10200)
 			ldev->caps.pad_max_freq_hz = 65000000;
 		ldev->caps.nb_irq = 2;
@@ -1842,6 +1846,7 @@ static int ltdc_get_caps(struct drm_device *ddev)
 		ldev->caps.fifo_threshold = false;
 		break;
 	case HWVER_40100:
+	case HWVER_40101:
 		ldev->caps.layer_ofs = LAY_OFS_1;
 		ldev->caps.layer_regs = ltdc_layer_regs_a2;
 		ldev->caps.pix_fmt_hw = ltdc_pix_fmt_a2;
@@ -1849,7 +1854,6 @@ static int ltdc_get_caps(struct drm_device *ddev)
 		ldev->caps.pix_fmt_nb = ARRAY_SIZE(ltdc_drm_fmt_a2);
 		ldev->caps.pix_fmt_flex = true;
 		ldev->caps.non_alpha_only_l1 = false;
-		ldev->caps.pad_max_freq_hz = 90000000;
 		ldev->caps.nb_irq = 2;
 		ldev->caps.ycbcr_input = true;
 		ldev->caps.ycbcr_output = true;
@@ -1872,6 +1876,8 @@ void ltdc_suspend(struct drm_device *ddev)
 
 	DRM_DEBUG_DRIVER("\n");
 	clk_disable_unprepare(ldev->pixel_clk);
+	if (ldev->bus_clk)
+		clk_disable_unprepare(ldev->bus_clk);
 }
 
 int ltdc_resume(struct drm_device *ddev)
@@ -1887,7 +1893,13 @@ int ltdc_resume(struct drm_device *ddev)
 		return ret;
 	}
 
-	return 0;
+	if (ldev->bus_clk) {
+		ret = clk_prepare_enable(ldev->bus_clk);
+		if (ret)
+			drm_err(ddev, "failed to enable bus clock (%d)\n", ret);
+	}
+
+	return ret;
 }
 
 int ltdc_load(struct drm_device *ddev)
@@ -1922,6 +1934,19 @@ int ltdc_load(struct drm_device *ddev)
 		return -ENODEV;
 	}
 
+	if (of_device_is_compatible(np, "st,stm32mp251-ltdc")) {
+		ldev->bus_clk = devm_clk_get(dev, "bus");
+		if (IS_ERR(ldev->bus_clk))
+			return dev_err_probe(dev, PTR_ERR(ldev->bus_clk),
+					     "Unable to get bus clock\n");
+
+		ret = clk_prepare_enable(ldev->bus_clk);
+		if (ret) {
+			drm_err(ddev, "Unable to prepare bus clock\n");
+			return ret;
+		}
+	}
+
 	/* Get endpoints if any */
 	for (i = 0; i < nb_endpoints; i++) {
 		ret = drm_of_find_panel_or_bridge(np, 0, i, &panel, &bridge);
@@ -2034,6 +2059,9 @@ int ltdc_load(struct drm_device *ddev)
 
 	clk_disable_unprepare(ldev->pixel_clk);
 
+	if (ldev->bus_clk)
+		clk_disable_unprepare(ldev->bus_clk);
+
 	pinctrl_pm_select_sleep_state(ddev->dev);
 
 	pm_runtime_enable(ddev->dev);
@@ -2042,6 +2070,9 @@ int ltdc_load(struct drm_device *ddev)
 err:
 	clk_disable_unprepare(ldev->pixel_clk);
 
+	if (ldev->bus_clk)
+		clk_disable_unprepare(ldev->bus_clk);
+
 	return ret;
 }
 
diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h
index 9d488043ffdbc652deeede71c9d57d45fb89d3c6..ddfa8ae61a7ba5dc446fae647562d0ec8e6953e1 100644
--- a/drivers/gpu/drm/stm/ltdc.h
+++ b/drivers/gpu/drm/stm/ltdc.h
@@ -40,10 +40,15 @@ struct fps_info {
 	ktime_t last_timestamp;
 };
 
+struct ltdc_plat_data {
+	int pad_max_freq_hz;	/* max frequency supported by pad */
+};
+
 struct ltdc_device {
 	void __iomem *regs;
 	struct regmap *regmap;
 	struct clk *pixel_clk;	/* lcd pixel clock */
+	struct clk *bus_clk;	/* bus clock */
 	struct mutex err_lock;	/* protecting error_status */
 	struct ltdc_caps caps;
 	u32 irq_status;

-- 
2.25.1

[PATCH v3 08/13] drm/stm: ltdc: handle lvds pixel clock

[Raphael Gallais-Pou]

From: Yannick Fertre <yannick.fertre@foss.st.com>

Handle LVDS pixel clock.

The LTDC operates with multiple clock domains for register access,
requiring all clocks to be provided during read/write operations.  This
imposes a dependency between the LVDS and LTDC to access correctly all
LTDC registers.  And because both IPs' pixel rates must be synchronized,
the LTDC has to handle the LVDS clock.

Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 drivers/gpu/drm/stm/ltdc.c | 22 +++++++++++++++++++++-
 drivers/gpu/drm/stm/ltdc.h |  1 +
 2 files changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 74e93f076b62a46e7835985d9d330ba66d990e58..a4c2a1e960fbe426bf5dd2b3f0a88ccff927d041 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -837,6 +837,12 @@ ltdc_crtc_mode_valid(struct drm_crtc *crtc,
 	int target_max = target + CLK_TOLERANCE_HZ;
 	int result;
 
+	if (ldev->lvds_clk) {
+		result = clk_round_rate(ldev->lvds_clk, target);
+		drm_dbg_driver(crtc->dev, "lvds pixclk rate target %d, available %d\n",
+			       target, result);
+	}
+
 	result = clk_round_rate(ldev->pixel_clk, target);
 
 	DRM_DEBUG_DRIVER("clk rate target %d, available %d\n", target, result);
@@ -1878,6 +1884,8 @@ void ltdc_suspend(struct drm_device *ddev)
 	clk_disable_unprepare(ldev->pixel_clk);
 	if (ldev->bus_clk)
 		clk_disable_unprepare(ldev->bus_clk);
+	if (ldev->lvds_clk)
+		clk_disable_unprepare(ldev->lvds_clk);
 }
 
 int ltdc_resume(struct drm_device *ddev)
@@ -1895,8 +1903,16 @@ int ltdc_resume(struct drm_device *ddev)
 
 	if (ldev->bus_clk) {
 		ret = clk_prepare_enable(ldev->bus_clk);
-		if (ret)
+		if (ret) {
 			drm_err(ddev, "failed to enable bus clock (%d)\n", ret);
+			return ret;
+		}
+	}
+
+	if (ldev->lvds_clk) {
+		ret = clk_prepare_enable(ldev->lvds_clk);
+		if (ret)
+			drm_err(ddev, "failed to prepare lvds clock\n");
 	}
 
 	return ret;
@@ -1980,6 +1996,10 @@ int ltdc_load(struct drm_device *ddev)
 		}
 	}
 
+	ldev->lvds_clk = devm_clk_get(dev, "lvds");
+	if (IS_ERR(ldev->lvds_clk))
+		ldev->lvds_clk = NULL;
+
 	rstc = devm_reset_control_get_exclusive(dev, NULL);
 
 	mutex_init(&ldev->err_lock);
diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h
index ddfa8ae61a7ba5dc446fae647562d0ec8e6953e1..17b51a7ce28eee5de6d24ca943ca3b1f48695dfd 100644
--- a/drivers/gpu/drm/stm/ltdc.h
+++ b/drivers/gpu/drm/stm/ltdc.h
@@ -48,6 +48,7 @@ struct ltdc_device {
 	void __iomem *regs;
 	struct regmap *regmap;
 	struct clk *pixel_clk;	/* lcd pixel clock */
+	struct clk *lvds_clk;	/* lvds pixel clock */
 	struct clk *bus_clk;	/* bus clock */
 	struct mutex err_lock;	/* protecting error_status */
 	struct ltdc_caps caps;

-- 
2.25.1

[PATCH v3 09/13] arm64: dts: st: add ltdc support on stm32mp251

[Raphael Gallais-Pou]

The LCD-TFT Display Controller (LTDC) handles display composition,
scaling and rotation.  It provides a parallel digital RGB flow to be
used by display interfaces.

Add the LTDC node.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp251.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 303abf915b8e489671b51a8c832041c14a42ecb8..372a99d9cc5c3730e8fbeddeb6134a3b18d938b6 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -1576,6 +1576,18 @@ dcmipp: dcmipp@48030000 {
 				status = "disabled";
 			};
 
+			ltdc: display-controller@48010000 {
+				compatible = "st,stm32mp251-ltdc";
+				reg = <0x48010000 0x400>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LTDC>, <&rcc CK_BUS_LTDC>;
+				clock-names = "lcd", "bus";
+				resets = <&rcc LTDC_R>;
+				access-controllers = <&rifsc 80>;
+				status = "disabled";
+			};
+
 			combophy: phy@480c0000 {
 				compatible = "st,stm32mp25-combophy";
 				reg = <0x480c0000 0x1000>;

-- 
2.25.1

[PATCH v3 10/13] arm64: dts: st: add lvds support on stm32mp255

[Raphael Gallais-Pou]

The LVDS is used on STM32MP2 as a display interface.

Add the LVDS node.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp255.dtsi | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/st/stm32mp255.dtsi b/arch/arm64/boot/dts/st/stm32mp255.dtsi
index f689b47c5010033120146cf1954d6624c0270045..a3b5ae25d28c83ade12c2ff69b82c9cccfd29b00 100644
--- a/arch/arm64/boot/dts/st/stm32mp255.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp255.dtsi
@@ -6,6 +6,18 @@
 #include "stm32mp253.dtsi"
 
 &rifsc {
+	lvds: lvds@48060000 {
+		compatible = "st,stm32mp255-lvds", "st,stm32mp25-lvds";
+		#clock-cells = <0>;
+		reg = <0x48060000 0x2000>;
+		clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>;
+		clock-names = "pclk", "ref";
+		resets = <&rcc LVDS_R>;
+		access-controllers = <&rifsc 84>;
+		power-domains = <&CLUSTER_PD>;
+		status = "disabled";
+	};
+
 	vdec: vdec@480d0000 {
 		compatible = "st,stm32mp25-vdec";
 		reg = <0x480d0000 0x3c8>;
@@ -22,4 +34,4 @@ venc: venc@480e0000 {
 		clocks = <&rcc CK_BUS_VENC>;
 		access-controllers = <&rifsc 90>;
 	};
-};
\ No newline at end of file
+};

-- 
2.25.1

[PATCH v3 11/13] arm64: dts: st: add clock-cells to syscfg node on stm32mp251

[Raphael Gallais-Pou]

Make the syscfg node a clock provider so clock consumers can reach child
clocks through device-tree.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp251.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 372a99d9cc5c3730e8fbeddeb6134a3b18d938b6..6d9c0a430a8cc82542029f18b8a1a954a7c4fddb 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -1868,6 +1868,7 @@ exti1: interrupt-controller@44220000 {
 		syscfg: syscon@44230000 {
 			compatible = "st,stm32mp25-syscfg", "syscon";
 			reg = <0x44230000 0x10000>;
+			#clock-cells = <0>;
 		};
 
 		pinctrl: pinctrl@44240000 {

-- 
2.25.1

[PATCH v3 12/13] arm64: dts: st: enable display support on stm32mp257f-ev1 board

[Raphael Gallais-Pou]

Enable the following IPs on stm32mp257f-ev1 in order to get display:
   * LTDC
   * LVDS
   * WSVGA LVDS panel (1024x600)
   * Panel LVDS backlight as GPIO backlight
   * ILI2511 i2c touchscreen

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp257f-ev1.dts | 79 ++++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 836b1958ce65fb72c99d634a92af3efaf9844d76..2958ad413b0675575d84942e193a16f80197b88e 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -86,6 +86,43 @@ mm_ospi1: mm-ospi@60000000 {
 			no-map;
 		};
 	};
+
+	panel_lvds: display {
+		compatible = "edt,etml0700z9ndha", "panel-lvds";
+		enable-gpios = <&gpiog 15 GPIO_ACTIVE_HIGH>;
+		backlight = <&panel_lvds_backlight>;
+		power-supply = <&scmi_v3v3>;
+		status = "okay";
+
+		width-mm = <156>;
+		height-mm = <92>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			clock-frequency = <54000000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <150>;
+			hback-porch = <150>;
+			hsync-len = <21>;
+			vfront-porch = <24>;
+			vback-porch = <24>;
+			vsync-len = <21>;
+		};
+
+		port {
+			lvds_panel_in: endpoint {
+				remote-endpoint = <&lvds_out0>;
+			};
+		};
+	};
+
+	panel_lvds_backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
 };
 
 &arm_wdt {
@@ -183,6 +220,15 @@ imx335_ep: endpoint {
 			};
 		};
 	};
+
+	ili2511: ili2511@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		interrupt-parent = <&gpioi>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpiog 14 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
 };
 
 &i2c8 {
@@ -230,6 +276,39 @@ timer {
 	};
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint {
+			remote-endpoint = <&lvds_in>;
+		};
+	};
+};
+
+&lvds {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			lvds_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			lvds_out0: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+};
+
 &rtc {
 	status = "okay";
 };

-- 
2.25.1

[PATCH v3 13/13] arm64: dts: st: add loopback clocks on LTDC node

[Raphael Gallais-Pou]

ck_ker_ltdc has the CLK_SET_RATE_PARENT flag.  While having this flag is
semantically correct, it for now leads to an improper setting of the
clock rate.  The ck_ker_ltdc parent clock is the flexgen 27, which does
not support changing rates yet.  To overcome this issue, a fixed clock
can be used for the kernel clock.

Add the clocks needed for the LTDC to work.

Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
---
 arch/arm64/boot/dts/st/stm32mp251.dtsi | 6 ++++++
 arch/arm64/boot/dts/st/stm32mp255.dtsi | 5 +++++
 2 files changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 6d9c0a430a8cc82542029f18b8a1a954a7c4fddb..24823bbfee31f15e813573ad1a0c4f67a125ce51 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -52,6 +52,12 @@ clk_rcbsec: clk-rcbsec {
 			compatible = "fixed-clock";
 			clock-frequency = <64000000>;
 		};
+
+		clk_flexgen_27_fixed: clk-54000000 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <54000000>;
+		};
 	};
 
 	firmware {
diff --git a/arch/arm64/boot/dts/st/stm32mp255.dtsi b/arch/arm64/boot/dts/st/stm32mp255.dtsi
index a3b5ae25d28c83ade12c2ff69b82c9cccfd29b00..07c200470b2cedde771ae987f2267d6097ea78f0 100644
--- a/arch/arm64/boot/dts/st/stm32mp255.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp255.dtsi
@@ -5,6 +5,11 @@
  */
 #include "stm32mp253.dtsi"
 
+&ltdc {
+	clocks = <&clk_flexgen_27_fixed>, <&rcc CK_BUS_LTDC>, <&syscfg>, <&lvds>;
+	clock-names = "lcd", "bus", "ref", "lvds";
+};
+
 &rifsc {
 	lvds: lvds@48060000 {
 		compatible = "st,stm32mp255-lvds", "st,stm32mp25-lvds";

-- 
2.25.1