Re: [PATCH v2 5/6] arm64: dts: qcom: qcs8300: Add gpu and gmu nodes

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 2/27/25 9:07 PM, Akhil P Oommen wrote:
> From: Jie Zhang <quic_jiezh@quicinc.com>
> 
> Add gpu and gmu nodes for qcs8300 chipset.
> 
> Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com>
> Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
> ---

[...]

> +		gmu: gmu@3d6a000 {
> +			compatible = "qcom,adreno-gmu-623.0", "qcom,adreno-gmu";
> +			reg = <0x0 0x03d6a000 0x0 0x34000>,

size = 0x26000 so that it doesn't leak into GPU_CC

> +			      <0x0 0x03de0000 0x0 0x10000>,
> +			      <0x0 0x0b290000 0x0 0x10000>;
> +			reg-names = "gmu", "rscc", "gmu_pdc";
> +			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hfi", "gmu";
> +			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
> +				 <&gpucc GPU_CC_CXO_CLK>,
> +				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
> +				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
> +				 <&gpucc GPU_CC_AHB_CLK>,
> +				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
> +				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;

This should only be bound to the SMMU

> +			clock-names = "gmu",
> +				      "cxo",
> +				      "axi",
> +				      "memnoc",
> +				      "ahb",
> +				      "hub",
> +				      "smmu_vote";
> +			power-domains = <&gpucc GPU_CC_CX_GDSC>,
> +					<&gpucc GPU_CC_GX_GDSC>;
> +			power-domain-names = "cx",
> +					     "gx";
> +			iommus = <&adreno_smmu 5 0xc00>;
> +			operating-points-v2 = <&gmu_opp_table>;
> +
> +			gmu_opp_table: opp-table {
> +				compatible = "operating-points-v2";
> +
> +				opp-200000000 {
> +					opp-hz = /bits/ 64 <200000000>;

It looks like this clock only has a 500 Mhz rate 

Konrad