public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Steven Price <steven.price@arm.com>
To: AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>,
	boris.brezillon@collabora.com
Cc: robh@kernel.org, maarten.lankhorst@linux.intel.com,
	mripard@kernel.org, tzimmermann@suse.de, airlied@gmail.com,
	daniel@ffwll.ch, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org, wenst@chromium.org,
	kernel@collabora.com
Subject: Re: [PATCH v3 6/6] drm/panfrost: Set regulators on/off during system sleep on MediaTek SoCs
Date: Fri, 10 Nov 2023 14:11:14 +0000	[thread overview]
Message-ID: <e44eb89f-2c72-4e0e-81f5-e39f1d734f46@arm.com> (raw)
In-Reply-To: <20231109102543.42971-7-angelogioacchino.delregno@collabora.com>

On 09/11/2023 10:25, AngeloGioacchino Del Regno wrote:
> All of the MediaTek SoCs supported by Panfrost can completely cut power
> to the GPU during full system sleep without any user-noticeable delay
> in the resume operation, as shown by measurements taken on multiple
> MediaTek SoCs (MT8183/86/92/95).
> 
> As an example, for MT8195 - a "before" with only runtime PM operations
> (so, without turning on/off regulators), and an "after" executing both
> the system sleep .resume() handler and .runtime_resume() (so the time
> refers to T_Resume + T_Runtime_Resume):
> 
> Average Panfrost-only system sleep resume time, before: ~33500ns
> Average Panfrost-only system sleep resume time, after:  ~336200ns
> 
> Keep in mind that this additional ~308200 nanoseconds delay happens only
> in resume from a full system suspend, and not in runtime PM operations,
> hence it is acceptable.
> 
> Measurements were also taken on MT8186, showing a delay of ~312000 ns.
> 
> Testing of this happened on all of the aforementioned MediaTek SoCs, but:
> MT8183 got tested only by KernelCI with <=10 suspend/resume cycles
> MT8186, MT8192, MT8195 were tested manually with over 100 suspend/resume
> cycles with GNOME DE (Mutter + Wayland).
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Reviewed-by: Steven Price <steven.price@arm.com>

> ---
>  drivers/gpu/drm/panfrost/panfrost_drv.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
> index 82f3c5fe9c58..f63382d9ab04 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_drv.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
> @@ -734,7 +734,7 @@ static const struct panfrost_compatible mediatek_mt8183_b_data = {
>  	.supply_names = mediatek_mt8183_b_supplies,
>  	.num_pm_domains = ARRAY_SIZE(mediatek_mt8183_pm_domains),
>  	.pm_domain_names = mediatek_mt8183_pm_domains,
> -	.pm_features = BIT(GPU_PM_CLK_DIS),
> +	.pm_features = BIT(GPU_PM_CLK_DIS) | BIT(GPU_PM_VREG_OFF),
>  };
>  
>  static const char * const mediatek_mt8186_pm_domains[] = { "core0", "core1" };
> @@ -743,7 +743,7 @@ static const struct panfrost_compatible mediatek_mt8186_data = {
>  	.supply_names = mediatek_mt8183_b_supplies,
>  	.num_pm_domains = ARRAY_SIZE(mediatek_mt8186_pm_domains),
>  	.pm_domain_names = mediatek_mt8186_pm_domains,
> -	.pm_features = BIT(GPU_PM_CLK_DIS),
> +	.pm_features = BIT(GPU_PM_CLK_DIS) | BIT(GPU_PM_VREG_OFF),
>  };
>  
>  static const char * const mediatek_mt8192_supplies[] = { "mali", NULL };
> @@ -754,7 +754,7 @@ static const struct panfrost_compatible mediatek_mt8192_data = {
>  	.supply_names = mediatek_mt8192_supplies,
>  	.num_pm_domains = ARRAY_SIZE(mediatek_mt8192_pm_domains),
>  	.pm_domain_names = mediatek_mt8192_pm_domains,
> -	.pm_features = BIT(GPU_PM_CLK_DIS),
> +	.pm_features = BIT(GPU_PM_CLK_DIS) | BIT(GPU_PM_VREG_OFF),
>  };
>  
>  static const struct of_device_id dt_match[] = {


  reply	other threads:[~2023-11-10 18:19 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-09 10:25 [PATCH v3 0/6] drm/panfrost: Turn off clocks and regulators in PM AngeloGioacchino Del Regno
2023-11-09 10:25 ` [PATCH v3 1/6] drm/panfrost: Perform hard reset to recover GPU if soft reset fails AngeloGioacchino Del Regno
2023-11-10 14:03   ` Steven Price
2023-11-09 10:25 ` [PATCH v3 2/6] drm/panfrost: Tighten polling for soft reset and power on AngeloGioacchino Del Regno
2023-11-09 10:25 ` [PATCH v3 3/6] drm/panfrost: Implement ability to turn on/off GPU clocks in suspend AngeloGioacchino Del Regno
2023-11-10 14:07   ` Steven Price
2023-11-09 10:25 ` [PATCH v3 4/6] drm/panfrost: Set clocks on/off during system sleep on MediaTek SoCs AngeloGioacchino Del Regno
2023-11-09 10:25 ` [PATCH v3 5/6] drm/panfrost: Implement ability to turn on/off regulators in suspend AngeloGioacchino Del Regno
2023-11-10 14:08   ` Steven Price
2023-11-09 10:25 ` [PATCH v3 6/6] drm/panfrost: Set regulators on/off during system sleep on MediaTek SoCs AngeloGioacchino Del Regno
2023-11-10 14:11   ` Steven Price [this message]
2023-11-10 14:31 ` [PATCH v3 0/6] drm/panfrost: Turn off clocks and regulators in PM Steven Price

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e44eb89f-2c72-4e0e-81f5-e39f1d734f46@arm.com \
    --to=steven.price@arm.com \
    --cc=airlied@gmail.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=boris.brezillon@collabora.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kernel@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=mripard@kernel.org \
    --cc=robh@kernel.org \
    --cc=tzimmermann@suse.de \
    --cc=wenst@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox