From: <Claudiu.Beznea@microchip.com>
To: <robert.hancock@calian.com>, <Nicolas.Ferre@microchip.com>,
<davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <richardcochran@gmail.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH net] net: macb: fix PTP TX timestamp failure due to packet padding
Date: Wed, 18 Jan 2023 09:39:28 +0000 [thread overview]
Message-ID: <e5960c25-1243-e9cf-2421-acddbf17b8e5@microchip.com> (raw)
In-Reply-To: <20230116214133.1834364-1-robert.hancock@calian.com>
On 16.01.2023 23:41, Robert Hancock wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> PTP TX timestamp handling was observed to be broken with this driver
> when using the raw Layer 2 PTP encapsulation. ptp4l was not receiving
> the expected TX timestamp after transmitting a packet, causing it to
> enter a failure state.
>
> The problem appears to be due to the way that the driver pads packets
> which are smaller than the Ethernet minimum of 60 bytes. If headroom
> space was available in the SKB, this caused the driver to move the data
> back to utilize it. However, this appears to cause other data references
> in the SKB to become inconsistent. In particular, this caused the
> ptp_one_step_sync function to later (in the TX completion path) falsely
> detect the packet as a one-step SYNC packet, even when it was not, which
> caused the TX timestamp to not be processed when it should be.
>
> Using the headroom for this purpose seems like an unnecessary complexity
> as this is not a hot path in the driver, and in most cases it appears
> that there is sufficient tailroom to not require using the headroom
> anyway. Remove this usage of headroom to prevent this inconsistency from
> occurring and causing other problems.
>
> Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation")
> Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> # on SAMA7G5
> ---
> drivers/net/ethernet/cadence/macb_main.c | 9 +--------
> 1 file changed, 1 insertion(+), 8 deletions(-)
>
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index 95667b979fab..72e42820713d 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -2187,7 +2187,6 @@ static int macb_pad_and_fcs(struct sk_buff **skb, struct net_device *ndev)
> bool cloned = skb_cloned(*skb) || skb_header_cloned(*skb) ||
> skb_is_nonlinear(*skb);
> int padlen = ETH_ZLEN - (*skb)->len;
> - int headroom = skb_headroom(*skb);
> int tailroom = skb_tailroom(*skb);
> struct sk_buff *nskb;
> u32 fcs;
> @@ -2201,9 +2200,6 @@ static int macb_pad_and_fcs(struct sk_buff **skb, struct net_device *ndev)
> /* FCS could be appeded to tailroom. */
> if (tailroom >= ETH_FCS_LEN)
> goto add_fcs;
> - /* FCS could be appeded by moving data to headroom. */
> - else if (!cloned && headroom + tailroom >= ETH_FCS_LEN)
> - padlen = 0;
> /* No room for FCS, need to reallocate skb. */
> else
> padlen = ETH_FCS_LEN;
> @@ -2212,10 +2208,7 @@ static int macb_pad_and_fcs(struct sk_buff **skb, struct net_device *ndev)
> padlen += ETH_FCS_LEN;
> }
>
> - if (!cloned && headroom + tailroom >= padlen) {
> - (*skb)->data = memmove((*skb)->head, (*skb)->data, (*skb)->len);
> - skb_set_tail_pointer(*skb, (*skb)->len);
> - } else {
> + if (cloned || tailroom < padlen) {
> nskb = skb_copy_expand(*skb, 0, padlen, GFP_ATOMIC);
> if (!nskb)
> return -ENOMEM;
> --
> 2.39.0
>
next prev parent reply other threads:[~2023-01-18 10:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-16 21:41 [PATCH net] net: macb: fix PTP TX timestamp failure due to packet padding Robert Hancock
2023-01-18 0:07 ` Jacob Keller
2023-01-18 9:39 ` Claudiu.Beznea [this message]
2023-01-18 9:39 ` Claudiu.Beznea
2023-01-18 14:30 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e5960c25-1243-e9cf-2421-acddbf17b8e5@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=robert.hancock@calian.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox