Re: [PATCH 0/2] Add MSM8996/MSM8953 dpu catalog

[barnabas.czeman@mainlining.org]

On 2024-08-01 21:25, Dmitry Baryshkov wrote:
> On Fri, Jun 28, 2024 at 04:39:38PM GMT, Barnabás Czémán wrote:
>> This patch series add dpu support for MSM8996/MSM8953 devices.
>> 
>> Note, by default these platforms are still handled by the MDP5 driver
>> unless the `msm.prefer_mdp5=false' parameter is provided.
> 
> Could you please provide a summary of features actually tested with the
> DPU driver? Have you tested YUV output? Have you tested RGB planes?
> Which LMs have you tested?

How can i check specific feature?
I have set echo 0x32 > /sys/module/drm/parameters/debug 
DRIVER+ATOMIC+VERBOSE ATOMIC log is pretty verbose and big this way.
For lm i have found this kind of message in log: [ 1027.577132] 
[drm:_dpu_crtc_blend_setup [msm]] lm 0, op_mode 0x2, ctl 0
> 
>> Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
>> ---
>> Dmitry Baryshkov (1):
>>       drm/msm/dpu: add support for MSM8953
>> 
>> Konrad Dybcio (1):
>>       drm/msm/dpu: Add MSM8996 support
>> 
>>  .../drm/msm/disp/dpu1/catalog/dpu_1_16_msm8953.h   | 218 
>> +++++++++++++
>>  .../drm/msm/disp/dpu1/catalog/dpu_1_7_msm8996.h    | 348 
>> +++++++++++++++++++++
>>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     | 106 +++++++
>>  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h     |   2 +
>>  drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            |   2 +
>>  drivers/gpu/drm/msm/msm_drv.c                      |   2 +
>>  6 files changed, 678 insertions(+)
>> ---
>> base-commit: df9574a57d02b265322e77fb8628d4d33641dda9
>> change-id: 20240528-dpu-msm8953-msm8996-5d0fb7e387b8
>> 
>> Best regards,
>> --
>> Barnabás Czémán <barnabas.czeman@mainlining.org>
>>