From: Siddharth Gupta <sidgup@codeaurora.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: agross@kernel.org, ohad@wizery.com,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
linux-kernel@vger.kernel.org, psodagud@codeaurora.org,
rishabhb@codeaurora.org
Subject: Re: [PATCH 3/3] soc: qcom: mdt_loader: Read hash from firmware blob
Date: Wed, 13 Jan 2021 15:01:18 -0800 [thread overview]
Message-ID: <ec2a7223-d785-a9f3-d864-3c03e4965be5@codeaurora.org> (raw)
In-Reply-To: <X/elgO+66ibjeL+3@builder.lan>
On 1/7/2021 4:21 PM, Bjorn Andersson wrote:
> On Wed 06 Jan 15:23 CST 2021, Siddharth Gupta wrote:
>
>> Since the split elf blobs will always contain the hash segment, we rely on
> I think it will sounds better if we add "should" in "we should rely on..."
Sure
>
>> the blob file to get the hash rather than assume that it will be present in
>> the mdt file. This change uses the hash index to read the appropriate elf
>> blob to get the hash segment.
>>
>> Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org>
>> ---
>> drivers/remoteproc/qcom_q6v5_mss.c | 4 ++--
>> drivers/soc/qcom/mdt_loader.c | 38 +++++++++++++++++++++++++++----------
>> include/linux/soc/qcom/mdt_loader.h | 3 ++-
>> 3 files changed, 32 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
>> index 66106ba..74c0229 100644
>> --- a/drivers/remoteproc/qcom_q6v5_mss.c
>> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
>> @@ -4,7 +4,7 @@
>> *
>> * Copyright (C) 2016 Linaro Ltd.
>> * Copyright (C) 2014 Sony Mobile Communications AB
>> - * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2012-2013, 2020 The Linux Foundation. All rights reserved.
>> */
>>
>> #include <linux/clk.h>
>> @@ -828,7 +828,7 @@ static int q6v5_mpss_init_image(struct q6v5 *qproc, const struct firmware *fw)
>> void *ptr;
>> int ret;
>>
>> - metadata = qcom_mdt_read_metadata(fw, &size);
>> + metadata = qcom_mdt_read_metadata(qproc->dev, fw, qproc->hexagon_mdt_image, &size);
>> if (IS_ERR(metadata))
>> return PTR_ERR(metadata);
>>
>> diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c
>> index c9bbd8c..6876c0b 100644
>> --- a/drivers/soc/qcom/mdt_loader.c
>> +++ b/drivers/soc/qcom/mdt_loader.c
>> @@ -103,15 +103,18 @@ EXPORT_SYMBOL_GPL(qcom_mdt_get_size);
>> *
>> * Return: pointer to data, or ERR_PTR()
>> */
>> -void *qcom_mdt_read_metadata(const struct firmware *fw, size_t *data_len)
>> +void *qcom_mdt_read_metadata(struct device *dev, const struct firmware *fw, const char *firmware,
>> + size_t *data_len)
>> {
>> const struct elf32_phdr *phdrs;
>> const struct elf32_hdr *ehdr;
>> - size_t hash_offset;
>> + const struct firmware *seg_fw;
>> size_t hash_index;
>> size_t hash_size;
>> size_t ehdr_size;
>> + char *fw_name;
>> void *data;
>> + int ret;
>>
>> ehdr = (struct elf32_hdr *)fw->data;
>> phdrs = (struct elf32_phdr *)(ehdr + 1);
>> @@ -137,14 +140,29 @@ void *qcom_mdt_read_metadata(const struct firmware *fw, size_t *data_len)
>> if (!data)
>> return ERR_PTR(-ENOMEM);
>>
>> - /* Is the header and hash already packed */
>> - if (qcom_mdt_bins_are_split(fw))
>> - hash_offset = phdrs[0].p_filesz;
>> - else
>> - hash_offset = phdrs[hash_index].p_offset;
>> -
>> + /* copy elf header */
>> memcpy(data, fw->data, ehdr_size);
>> - memcpy(data + ehdr_size, fw->data + hash_offset, hash_size);
>> +
> This seems to duplicates parts of the loop in __qcom_mdt_load(), how
> about breaking this out to a separate
>
> static int mdt_load_segment(struct device *dev, const struct firmware *fw,
> int idx, void *buf, size_t len, bool is_split)
>
> Which either just memcpy from @fw or does the filename and loading
> dance, based on @is_split?
Since mdt_load_segment won't know the name of the firmware without a
global variable
(which in turn will make it non-reentrant), the idea of creating such a
function and not passing
the actual name of the firmware seemed wrong.
If we want to pass the firmware name in this function the code size will
be more or equal to
what we started with. If that is not a problem I can make the changes.
Thanks,
Sid
>
> Regards,
> Bjorn
>
>> + if (qcom_mdt_bins_are_split(fw)) {
>> + fw_name = kstrdup(firmware, GFP_KERNEL);
>> + if (!fw_name) {
>> + kfree(data);
>> + return ERR_PTR(-ENOMEM);
>> + }
>> + snprintf(fw_name + strlen(fw_name) - 3, 4, "b%02d", hash_index);
>> +
>> + ret = request_firmware_into_buf(&seg_fw, fw_name, dev, data + ehdr_size, hash_size);
>> + kfree(fw_name);
>> +
>> + if (ret) {
>> + kfree(data);
>> + return ERR_PTR(ret);
>> + }
>> +
>> + release_firmware(seg_fw);
>> + } else {
>> + memcpy(data + ehdr_size, fw->data + phdrs[hash_index].p_offset, hash_size);
>> + }
>>
>> *data_len = ehdr_size + hash_size;
>>
>> @@ -191,7 +209,7 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
>> return -ENOMEM;
>>
>> if (pas_init) {
>> - metadata = qcom_mdt_read_metadata(fw, &metadata_len);
>> + metadata = qcom_mdt_read_metadata(dev, fw, firmware, &metadata_len);
>> if (IS_ERR(metadata)) {
>> ret = PTR_ERR(metadata);
>> goto out;
>> diff --git a/include/linux/soc/qcom/mdt_loader.h b/include/linux/soc/qcom/mdt_loader.h
>> index e600bae..04ba5e8 100644
>> --- a/include/linux/soc/qcom/mdt_loader.h
>> +++ b/include/linux/soc/qcom/mdt_loader.h
>> @@ -21,6 +21,7 @@ int qcom_mdt_load_no_init(struct device *dev, const struct firmware *fw,
>> const char *fw_name, int pas_id, void *mem_region,
>> phys_addr_t mem_phys, size_t mem_size,
>> phys_addr_t *reloc_base);
>> -void *qcom_mdt_read_metadata(const struct firmware *fw, size_t *data_len);
>> +void *qcom_mdt_read_metadata(struct device *dev, const struct firmware *fw, const char *firmware,
>> + size_t *data_len);
>>
>> #endif
>> --
>> Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> a Linux Foundation Collaborative Project
>>
next prev parent reply other threads:[~2021-01-14 1:53 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-06 21:23 [PATCH 0/3] soc: qcom: mdt_loader: General improvements Siddharth Gupta
2021-01-06 21:23 ` [PATCH 1/3] soc: qcom: mdt_loader: Allow hash at any phdr Siddharth Gupta
2021-01-08 0:03 ` Bjorn Andersson
2021-01-06 21:23 ` [PATCH 2/3] soc: qcom: mdt_loader: Handle split bins correctly Siddharth Gupta
2021-01-08 0:07 ` Bjorn Andersson
2021-01-06 21:23 ` [PATCH 3/3] soc: qcom: mdt_loader: Read hash from firmware blob Siddharth Gupta
2021-01-06 23:41 ` kernel test robot
2021-01-08 0:21 ` Bjorn Andersson
2021-01-13 23:01 ` Siddharth Gupta [this message]
2021-01-14 17:46 ` Bjorn Andersson
2021-01-17 23:03 ` Siddharth Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ec2a7223-d785-a9f3-d864-3c03e4965be5@codeaurora.org \
--to=sidgup@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=ohad@wizery.com \
--cc=psodagud@codeaurora.org \
--cc=rishabhb@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox