RE: [PATCH v1 4/5] wifi: rtw88: rtw8822b: Implement RTL8822BS (SDIO) efuse parsing

[Ping-Ke Shih <pkshih@realtek.com>]

> -----Original Message-----
> From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Sent: Wednesday, February 15, 2023 5:14 AM
> To: linux-wireless@vger.kernel.org
> Cc: tony0620emma@gmail.com; kvalo@kernel.org; netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Neo
> Jou <neojou@gmail.com>; Jernej Skrabec <jernej.skrabec@gmail.com>; Ping-Ke Shih <pkshih@realtek.com>;
> Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Subject: [PATCH v1 4/5] wifi: rtw88: rtw8822b: Implement RTL8822BS (SDIO) efuse parsing
> 
> The efuse of the SDIO RTL8822BS chip has only one known member: the mac
> address is at offset 0x11a. Add a struct rtw8822bs_efuse describing this
> and use it for copying the mac address when the SDIO bus is used.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  drivers/net/wireless/realtek/rtw88/rtw8822b.c | 10 ++++++++++
>  drivers/net/wireless/realtek/rtw88/rtw8822b.h |  6 ++++++
>  2 files changed, 16 insertions(+)
> 
> diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.c
> b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
> index 74dfb89b2c94..4ed5b98fab23 100644
> --- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c
> +++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
> @@ -26,10 +26,17 @@ static void rtw8822be_efuse_parsing(struct rtw_efuse *efuse,
>         ether_addr_copy(efuse->addr, map->e.mac_addr);
>  }
> 
> +static void rtw8822bs_efuse_parsing(struct rtw_efuse *efuse,
> +                                   struct rtw8822b_efuse *map)
> +{
> +       ether_addr_copy(efuse->addr, map->s.mac_addr);
> +}
> +
>  static void rtw8822bu_efuse_parsing(struct rtw_efuse *efuse,
>                                     struct rtw8822b_efuse *map)
>  {
>         ether_addr_copy(efuse->addr, map->u.mac_addr);
> +

Don't need to stir USB code.

>  }
> 
>  static int rtw8822b_read_efuse(struct rtw_dev *rtwdev, u8 *log_map)
> @@ -62,6 +69,9 @@ static int rtw8822b_read_efuse(struct rtw_dev *rtwdev, u8 *log_map)
>         case RTW_HCI_TYPE_PCIE:
>                 rtw8822be_efuse_parsing(efuse, map);
>                 break;
> +       case RTW_HCI_TYPE_SDIO:
> +               rtw8822bs_efuse_parsing(efuse, map);
> +               break;
>         case RTW_HCI_TYPE_USB:
>                 rtw8822bu_efuse_parsing(efuse, map);
>                 break;
> diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.h
> b/drivers/net/wireless/realtek/rtw88/rtw8822b.h
> index 01d3644e0c94..8d05805c046c 100644
> --- a/drivers/net/wireless/realtek/rtw88/rtw8822b.h
> +++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.h
> @@ -65,6 +65,11 @@ struct rtw8822be_efuse {
>         u8 res7;
>  };
> 
> +struct rtw8822bs_efuse {
> +       u8 res4[0x4a];                  /* 0xd0 */
> +       u8 mac_addr[ETH_ALEN];          /* 0x11a */
> +} __packed;
> +
>  struct rtw8822b_efuse {
>         __le16 rtl_id;
>         u8 res0[0x0e];
> @@ -94,6 +99,7 @@ struct rtw8822b_efuse {
>         union {
>                 struct rtw8822bu_efuse u;
>                 struct rtw8822be_efuse e;
> +               struct rtw8822bs_efuse s;

No obvious problem in whole patchset. Only a nit about the order of PCIE-USB-SDIO.
Can we have them in consistent order?

Here, the order is USB-PCIE-SDIO, but patch 3/5 and 5/5 in different order.
It seems like we messed up the order when adding USB, but we can correct them
along with this patch. My prefer order is PCIE-USB-SDIO after adding SDIO,
because the order of existing code of 'switch...case' is PCIE-USB.

Apply this rule not only here also 'switch...case' and 'efuse parser'.

Ping-Ke