From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: James Alexander <opensource@inspiredexperts.com>
Cc: Daniel Scally <dan.scally@ideasonboard.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Hans de Goede <hansg@kernel.org>,
platform-driver-x86@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] platform/x86: int3472: add HP Spectre handshake delay
Date: Tue, 18 Aug 2026 13:15:12 +0300 (EEST) [thread overview]
Message-ID: <efd97842-f8af-e2eb-c2ea-2e5a13f57040@linux.intel.com> (raw)
In-Reply-To: <20260816204247.2844986-1-opensource@inspiredexperts.com>
On Sun, 16 Aug 2026, James Alexander wrote:
> The OVTI08F4 sensor on an HP Spectre x360 14-eu0xxx failed to read its
> chip ID with error -121 when the existing 45 ms handshake delay was used.
> Increasing the delay to 150 ms allowed the sensor to probe.
>
> Keep the existing delay for other OVTI08F4 systems. Add a reusable
> handshake-delay field to the discrete-device quirks and set it only for the
> affected HP Spectre family through DMI matching.
>
> Compile-tested against Linux base fd923b32d761. Hardware-tested with the
> full patch set across 25 consecutive reboots on the affected laptop running
> Ubuntu 7.0.0-29-generic; the sensor probed successfully on every boot.
>
> Signed-off-by: James Alexander <opensource@inspiredexperts.com>
> ---
> diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
> index 115bb3757..80efeb452 100644
> --- a/drivers/platform/x86/intel/int3472/discrete.c
> +++ b/drivers/platform/x86/intel/int3472/discrete.c
> @@ -193,6 +193,9 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3
> GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;
> *con_id = int3472_gpio_map[i].con_id;
> *enable_time_us = int3472_gpio_map[i].enable_time_us;
> + if (int3472_gpio_map[i].type_to == INT3472_GPIO_TYPE_HANDSHAKE &&
> + int3472->quirks.handshake_enable_time_us)
> + *enable_time_us = int3472->quirks.handshake_enable_time_us;
> return;
> }
>
> diff --git a/drivers/platform/x86/intel/int3472/discrete_quirks.c b/drivers/platform/x86/intel/int3472/discrete_quirks.c
> index 552869ef9..d31f7c764 100644
> --- a/drivers/platform/x86/intel/int3472/discrete_quirks.c
> +++ b/drivers/platform/x86/intel/int3472/discrete_quirks.c
> @@ -8,6 +8,10 @@ static const struct int3472_discrete_quirks lenovo_miix_510_quirks = {
> .avdd_second_sensor = "i2c-OVTI2680:00",
> };
>
> +static const struct int3472_discrete_quirks hp_spectre_14_eu0xxx_quirks = {
> + .handshake_enable_time_us = 150 * USEC_PER_MSEC,
Hi,
Please add include for USEC_PER_MSEC.
--
i.
> +};
> +
> const struct dmi_system_id skl_int3472_discrete_quirks[] = {
> {
> /* Lenovo Miix 510-12IKB */
> @@ -17,5 +21,14 @@ const struct dmi_system_id skl_int3472_discrete_quirks[] = {
> },
> .driver_data = (void *)&lenovo_miix_510_quirks,
> },
> + {
> + /* HP Spectre x360 2-in-1 Laptop 14-eu0xxx */
> + .matches = {
> + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "HP"),
> + DMI_EXACT_MATCH(DMI_PRODUCT_NAME,
> + "HP Spectre x360 2-in-1 Laptop 14-eu0xxx"),
> + },
> + .driver_data = (void *)&hp_spectre_14_eu0xxx_quirks,
> + },
> { }
> };
> diff --git a/include/linux/platform_data/x86/int3472.h b/include/linux/platform_data/x86/int3472.h
> index a73841dfa..797694aa8 100644
> --- a/include/linux/platform_data/x86/int3472.h
> +++ b/include/linux/platform_data/x86/int3472.h
> @@ -96,6 +96,8 @@ struct int3472_cldb {
> struct int3472_discrete_quirks {
> /* For models where AVDD GPIO is shared between sensors */
> const char *avdd_second_sensor;
> + /* Override the default delay for handshake GPIO regulators */
> + unsigned int handshake_enable_time_us;
> };
>
> struct int3472_gpio_regulator {
>
next prev parent reply other threads:[~2026-08-18 10:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-16 20:42 [PATCH] platform/x86: int3472: add HP Spectre handshake delay James Alexander
2026-08-18 10:15 ` Ilpo Järvinen [this message]
2026-08-18 10:43 ` Hans de Goede
2026-08-18 11:00 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=efd97842-f8af-e2eb-c2ea-2e5a13f57040@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=dan.scally@ideasonboard.com \
--cc=hansg@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=opensource@inspiredexperts.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox