From: Jihong Min <hurryman2212@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>,
Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
Mario Limonciello <mario.limonciello@amd.com>,
Basavaraj Natikar <Basavaraj.Natikar@amd.com>,
linux-usb@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-doc@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, Jihong Min <hurryman2212@gmail.com>
Subject: [PATCH v3 1/2] usb: xhci-pci: add generic auxiliary device interface
Date: Thu, 7 May 2026 12:31:58 +0900 [thread overview]
Message-ID: <effa7bd7bef8a8ea28b9e28fe47af6a58e39edf2.1778123510.git.hurryman2212@gmail.com> (raw)
In-Reply-To: <cover.1778123510.git.hurryman2212@gmail.com>
Some xHCI PCI controllers expose controller-specific functionality that is
not part of generic xHCI operation and is better handled by optional child
drivers in other subsystems. Add a small auxiliary device registration path
for selected xHCI PCI controllers.
The initial PCI ID match table lists AMD Promontory 21 (PROM21) 1022:43fd
controllers. For matching controllers, xhci-pci creates an auxiliary
device and stores it in devres so the remove path destroys it before HCD
teardown.
Subsystem-specific child drivers can then bind to those devices through
the auxiliary bus and keep their hardware-specific logic outside xhci-pci.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
---
drivers/usb/host/Kconfig | 10 +++++
drivers/usb/host/xhci-pci.c | 83 +++++++++++++++++++++++++++++++++++++
2 files changed, 93 insertions(+)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0a277a07cf70..e0c2c7ac5c97 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -42,6 +42,16 @@ config USB_XHCI_PCI
depends on USB_PCI
default y
+config USB_XHCI_PCI_AUXDEV
+ bool "xHCI PCI auxiliary device support"
+ depends on USB_XHCI_PCI
+ select AUXILIARY_BUS
+ help
+ This enables xHCI PCI support for registering auxiliary devices
+ for selected controllers. It is used by optional child drivers
+ that bind to xHCI PCI controller-specific functionality through
+ the auxiliary bus.
+
config USB_XHCI_PCI_RENESAS
tristate "Support for additional Renesas xHCI controller with firmware"
depends on USB_XHCI_PCI
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 585b2f3117b0..618d6840e108 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -8,6 +8,8 @@
* Some code borrowed from the Linux EHCI driver.
*/
+#include <linux/auxiliary_bus.h>
+#include <linux/device/devres.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -80,6 +82,7 @@
#define PCI_DEVICE_ID_AMD_RAVEN_15E1_XHCI 0x15e1
#define PCI_DEVICE_ID_AMD_RAVEN2_XHCI 0x15e5
#define PCI_DEVICE_ID_AMD_RENOIR_XHCI 0x1639
+#define PCI_DEVICE_ID_AMD_PROM21_XHCI 0x43fd
#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb
@@ -103,6 +106,80 @@ static int xhci_pci_run(struct usb_hcd *hcd);
static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
struct usb_tt *tt, gfp_t mem_flags);
+static const struct pci_device_id pci_ids_have_aux[] = {
+ { PCI_DEVICE_DATA(AMD, PROM21_XHCI, "prom21_hwmon") },
+ { /* end: all zeroes */ }
+};
+
+struct xhci_pci_aux_devres {
+ struct auxiliary_device *auxdev;
+};
+
+static const char *xhci_pci_aux_dev_name(struct pci_dev *pdev)
+{
+ const struct pci_device_id *id;
+
+ id = pci_match_id(pci_ids_have_aux, pdev);
+ if (!id)
+ return NULL;
+
+ return (const char *)id->driver_data;
+}
+
+static void xhci_pci_aux_devres_release(struct device *dev, void *res)
+{
+ struct xhci_pci_aux_devres *devres = res;
+
+ if (devres->auxdev)
+ auxiliary_device_destroy(devres->auxdev);
+}
+
+static void xhci_pci_try_add_aux_device(struct pci_dev *pdev)
+{
+ struct xhci_pci_aux_devres *devres;
+ struct auxiliary_device *auxdev;
+ const char *aux_dev_name;
+
+ aux_dev_name = xhci_pci_aux_dev_name(pdev);
+ if (!aux_dev_name)
+ return;
+
+ devres = devres_alloc(xhci_pci_aux_devres_release, sizeof(*devres),
+ GFP_KERNEL);
+ if (!devres) {
+ dev_warn(&pdev->dev,
+ "failed to allocate auxiliary device state\n");
+ return;
+ }
+
+ auxdev = auxiliary_device_create(&pdev->dev, KBUILD_MODNAME,
+ aux_dev_name, NULL,
+ (pci_domain_nr(pdev->bus) << 16) |
+ pci_dev_id(pdev));
+ if (!auxdev) {
+ devres_free(devres);
+ dev_warn(&pdev->dev, "failed to add %s auxiliary device\n",
+ aux_dev_name);
+ return;
+ }
+
+ devres->auxdev = auxdev;
+ devres_add(&pdev->dev, devres);
+}
+
+static void xhci_pci_try_remove_aux_device(struct pci_dev *pdev)
+{
+ struct xhci_pci_aux_devres *devres;
+
+ devres = devres_find(&pdev->dev, xhci_pci_aux_devres_release, NULL,
+ NULL);
+ if (!devres || !devres->auxdev)
+ return;
+
+ auxiliary_device_destroy(devres->auxdev);
+ devres->auxdev = NULL;
+}
+
static const struct xhci_driver_overrides xhci_pci_overrides __initconst = {
.reset = xhci_pci_setup,
.start = xhci_pci_run,
@@ -677,6 +754,9 @@ int xhci_pci_common_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (device_property_read_bool(&dev->dev, "ti,pwron-active-high"))
pci_clear_and_set_config_dword(dev, 0xE0, 0, 1 << 22);
+ if (IS_ENABLED(CONFIG_USB_XHCI_PCI_AUXDEV))
+ xhci_pci_try_add_aux_device(dev);
+
return 0;
put_usb3_hcd:
@@ -713,6 +793,9 @@ void xhci_pci_remove(struct pci_dev *dev)
xhci = hcd_to_xhci(pci_get_drvdata(dev));
set_power_d3 = xhci->quirks & XHCI_SPURIOUS_WAKEUP;
+ if (IS_ENABLED(CONFIG_USB_XHCI_PCI_AUXDEV))
+ xhci_pci_try_remove_aux_device(dev);
+
xhci->xhc_state |= XHCI_STATE_REMOVING;
if (pci_choose_state(dev, PMSG_SUSPEND) == PCI_D0)
--
2.53.0
next prev parent reply other threads:[~2026-05-07 3:32 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-07 3:31 [PATCH v3 0/2] AMD Promontory 21 xHCI temperature hwmon support Jihong Min
2026-05-07 3:31 ` Jihong Min [this message]
2026-05-07 9:31 ` [PATCH v3 1/2] usb: xhci-pci: add generic auxiliary device interface Mathias Nyman
2026-05-08 7:04 ` Jihong Min
2026-05-08 13:17 ` Guenter Roeck
2026-05-08 14:22 ` Jihong Min
2026-05-07 3:31 ` [PATCH v3 2/2] hwmon: add AMD Promontory 21 xHCI temperature sensor support Jihong Min
2026-05-07 15:53 ` Guenter Roeck
2026-05-08 5:42 ` Jihong Min
2026-05-08 13:12 ` Guenter Roeck
2026-05-08 14:21 ` Jihong Min
2026-05-08 16:27 ` Mario Limonciello
2026-05-08 16:56 ` Jihong Min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=effa7bd7bef8a8ea28b9e28fe47af6a58e39edf2.1778123510.git.hurryman2212@gmail.com \
--to=hurryman2212@gmail.com \
--cc=Basavaraj.Natikar@amd.com \
--cc=corbet@lwn.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mario.limonciello@amd.com \
--cc=mathias.nyman@intel.com \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox