[PATCH v4 0/2] man/man2/mremap.2: describe multiple mapping move, shrink

[PATCH v4 0/2] man/man2/mremap.2: describe multiple mapping move, shrink

[Lorenzo Stoakes]

We have added new functionality to mremap() in Linux 6.17, permitting the
move of multiple VMAs when performing a move alone (that is - providing
MREMAP_MAYMOVE | MREMAP_FIXED flags and specifying old_size == new_size).

We document this new feature.

Additionally, we document previously undocumented behaviour around
shrinking of input VMA ranges which permits the input range to span
multiple VMAs.

v4:
* Update description of newly discovered mremap() behaviour to highlight the
  fact that, if in-place, [old_address, old_address + new_length) may span
  multiple VMAs also.
* Fix up commit message for 2/2 to correct typo on specified range.
* Added code sample to 1/2 as per Alejandro.

v3:
* Use more precise language around mremap() move description as per Jann.
* Fix some typos in commit messages.
https://lore.kernel.org/all/cover.1753795807.git.lorenzo.stoakes@oracle.com/

v2:
* Split out the two man page changes as requested by Alejandro.
https://lore.kernel.org/all/cover.1753711160.git.lorenzo.stoakes@oracle.com/

v1:
https://lore.kernel.org/all/20250723174634.75054-1-lorenzo.stoakes@oracle.com/

Lorenzo Stoakes (2):
  man/man2/mremap.2: describe multiple mapping move
  man/man2/mremap.2: describe previously undocumented shrink behaviour

 man/man2/mremap.2 | 111 +++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 100 insertions(+), 11 deletions(-)

--
2.50.1

[PATCH v4 1/2] man/man2/mremap.2: describe multiple mapping move

[Lorenzo Stoakes]

Document the new behaviour introduced in Linux 6.17 whereby it is now
possible to move multiple mappings in a single operation, as long as the
operation is purely a move, that is old_size is equal to new_size and
MREMAP_FIXED is specified.

To make things clearer, also describe this 'pure move' operation, before
expanding upon it to describe the newly introduced behaviour.

This change also explains the limitations of of this method and the
possibility of partial failure.

Finally, we pluralise language where it makes sense to so the documentation
does not contradict either this new capability nor the pre-existing edge
case.

Example code is enclosed below demonstrating the behaviour which is now
possible:

int main(void)
{
	unsigned long page_size = sysconf(_SC_PAGESIZE);
	void *ptr = mmap(NULL, 10 * page_size, PROT_READ | PROT_WRITE,
			 MAP_ANON | MAP_PRIVATE, -1, 0);
	void *tgt_ptr = mmap(NULL, 10 * page_size, PROT_NONE,
			     MAP_ANON | MAP_PRIVATE, -1, 0);
	int i;

	if (ptr == MAP_FAILED || tgt_ptr == MAP_FAILED) {
		perror("mmap");
		return EXIT_FAILURE;
	}

	/* Unmap every other page. */
	for (i = 1; i < 10; i += 2)
		munmap(ptr + i * page_size, page_size);

	/* Now move all 5 distinct mappings to tgt_ptr. */
	ptr = mremap(ptr, 10 * page_size, 10 * page_size,
		     MREMAP_MAYMOVE | MREMAP_FIXED, tgt_ptr);
	if (ptr == MAP_FAILED) {
		perror("mremap");
		return EXIT_FAILURE;
	}

	return EXIT_SUCCESS;
}

Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
---
 man/man2/mremap.2 | 84 ++++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 73 insertions(+), 11 deletions(-)

diff --git a/man/man2/mremap.2 b/man/man2/mremap.2
index 2168ca728..6ba51310c 100644
--- a/man/man2/mremap.2
+++ b/man/man2/mremap.2
@@ -25,18 +25,47 @@ moving it at the same time (controlled by the
 argument and
 the available virtual address space).
 .P
+Mappings can also simply be moved
+(without any resizing)
+by specifying equal
+.I old_size
+and
+.I new_size
+and using the
+.B MREMAP_FIXED
+flag
+(see below).
+Since Linux 6.17,
+while
+.I old_address
+must reside within a mapping,
+.I old_size
+may span multiple mappings
+which do not have to be
+adjacent to one another when
+performing a move like this.
+The
+.B MREMAP_DONTUNMAP
+flag may be specified.
+.P
+If the operation is not
+simply moving mappings,
+then
+.I old_size
+must span only a single mapping.
+.P
 .I old_address
-is the old address of the virtual memory block that you
-want to expand (or shrink).
+is the old address of the first virtual memory block that you
+want to expand, shrink, and/or move.
 Note that
 .I old_address
 has to be page aligned.
 .I old_size
-is the old size of the
-virtual memory block.
+is the size of the range containing
+virtual memory blocks to be manipulated.
 .I new_size
 is the requested size of the
-virtual memory block after the resize.
+virtual memory blocks after the resize.
 An optional fifth argument,
 .IR new_address ,
 may be provided; see the description of
@@ -105,13 +134,43 @@ If
 is specified, then
 .B MREMAP_MAYMOVE
 must also be specified.
+.IP
+Since Linux 6.17,
+if
+.I old_size
+is equal to
+.I new_size
+and
+.B MREMAP_FIXED
+is specified, then
+.I old_size
+may span beyond the mapping in which
+.I old_address
+resides.
+In this case,
+gaps between mappings in the original range
+are maintained in the new range.
+The whole operation is performed atomically
+unless an error arises,
+in which case the operation may be partially
+completed,
+that is,
+some mappings may be moved and others not.
+.IP
+
+Moving multiple mappings is not permitted if
+any of those mappings have either
+been registered with
+.BR userfaultfd (2) ,
+or map drivers that
+specify their own custom address mapping logic.
 .TP
 .BR MREMAP_DONTUNMAP " (since Linux 5.7)"
 .\" commit e346b3813067d4b17383f975f197a9aa28a3b077
 This flag, which must be used in conjunction with
 .BR MREMAP_MAYMOVE ,
-remaps a mapping to a new address but does not unmap the mapping at
-.IR old_address .
+remaps mappings to a new address but does not unmap them
+from their original address.
 .IP
 The
 .B MREMAP_DONTUNMAP
@@ -149,13 +208,13 @@ mapped.
 See NOTES for some possible applications of
 .BR MREMAP_DONTUNMAP .
 .P
-If the memory segment specified by
+If the memory segments specified by
 .I old_address
 and
 .I old_size
-is locked (using
+are locked (using
 .BR mlock (2)
-or similar), then this lock is maintained when the segment is
+or similar), then this lock is maintained when the segments are
 resized and/or relocated.
 As a consequence, the amount of memory locked by the process may change.
 .SH RETURN VALUE
@@ -188,7 +247,10 @@ virtual memory address for this process.
 You can also get
 .B EFAULT
 even if there exist mappings that cover the
-whole address space requested, but those mappings are of different types.
+whole address space requested, but those mappings are of different types,
+and the
+.BR mremap ()
+operation being performed does not support this.
 .TP
 .B EINVAL
 An invalid argument was given.
-- 
2.50.1

[PATCH v4 2/2] man/man2/mremap.2: describe previously undocumented shrink behaviour

[Lorenzo Stoakes]

There is pre-existing logic that appears to be undocumented for an mremap()
shrink operation, where it turns out that the usual 'input range must span
a single mapping' requirement no longer applies.

In fact, it turns out that the input range specified by [old_address,
old_address + old_size) may span any number of mappings.

If shrinking in-place (that is, neither the MREMAP_FIXED nor
MREMAP_DONTUNMAP flags are specified), then the new span may also span any
number of VMAs - [old_address, old_address + new_size).

If shrinking and moving, the range specified by [old_address, old_address +
new_size) must span a single VMA.

There must be at least one VMA contained within the [old_address,
old_address + old_size) range, and old_address must be within the range of
a VMA.

Explicitly document this.

Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
---
 man/man2/mremap.2 | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)

diff --git a/man/man2/mremap.2 b/man/man2/mremap.2
index 6ba51310c..631c835b8 100644
--- a/man/man2/mremap.2
+++ b/man/man2/mremap.2
@@ -48,8 +48,35 @@ The
 .B MREMAP_DONTUNMAP
 flag may be specified.
 .P
-If the operation is not
-simply moving mappings,
+Equally, if the operation performs a shrink,
+that is if
+.I old_size
+is greater than
+.IR new_size ,
+then
+.I old_size
+may also span multiple mappings
+which do not have to be
+adjacent to one another.
+If this shrink is performed
+in-place,
+that is,
+neither
+.BR MREMAP_FIXED ,
+nor
+.B MREMAP_DONTUNMAP
+are specified,
+.I new_size
+may also span multiple VMAs.
+However, if the range is moved,
+then
+.I new_size
+must span only a single mapping.
+.P
+If the operation is neither a
+.B MREMAP_FIXED
+move
+nor a shrink,
 then
 .I old_size
 must span only a single mapping.
-- 
2.50.1

Re: [PATCH v4 0/2] man/man2/mremap.2: describe multiple mapping move, shrink

[Lorenzo Stoakes]

On Tue, Aug 05, 2025 at 06:31:54PM +0100, Lorenzo Stoakes wrote:
> We have added new functionality to mremap() in Linux 6.17, permitting the
> move of multiple VMAs when performing a move alone (that is - providing
> MREMAP_MAYMOVE | MREMAP_FIXED flags and specifying old_size == new_size).
>
> We document this new feature.
>
> Additionally, we document previously undocumented behaviour around
> shrinking of input VMA ranges which permits the input range to span
> multiple VMAs.
>
> v4:
> * Update description of newly discovered mremap() behaviour to highlight the
>   fact that, if in-place, [old_address, old_address + new_length) may span
>   multiple VMAs also.
> * Fix up commit message for 2/2 to correct typo on specified range.
> * Added code sample to 1/2 as per Alejandro.
>
> v3:
> * Use more precise language around mremap() move description as per Jann.
> * Fix some typos in commit messages.
> https://lore.kernel.org/all/cover.1753795807.git.lorenzo.stoakes@oracle.com/
>
> v2:
> * Split out the two man page changes as requested by Alejandro.
> https://lore.kernel.org/all/cover.1753711160.git.lorenzo.stoakes@oracle.com/
>
> v1:
> https://lore.kernel.org/all/20250723174634.75054-1-lorenzo.stoakes@oracle.com/
>
> Lorenzo Stoakes (2):
>   man/man2/mremap.2: describe multiple mapping move
>   man/man2/mremap.2: describe previously undocumented shrink behaviour
>
>  man/man2/mremap.2 | 111 +++++++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 100 insertions(+), 11 deletions(-)
>
> --
> 2.50.1

Hey Alejandro,

Just wondering if this has everything you need, let me know if there's
anything I need to do here!

Cheers, Lorenzo

Re: [PATCH v4 1/2] man/man2/mremap.2: describe multiple mapping move

[Alejandro Colomar]

[-- Attachment #1: Type: text/plain, Size: 6007 bytes --]

Hi Lorenzo,

On Tue, Aug 05, 2025 at 06:31:55PM +0100, Lorenzo Stoakes wrote:
> Document the new behaviour introduced in Linux 6.17 whereby it is now
> possible to move multiple mappings in a single operation, as long as the
> operation is purely a move, that is old_size is equal to new_size and
> MREMAP_FIXED is specified.
> 
> To make things clearer, also describe this 'pure move' operation, before
> expanding upon it to describe the newly introduced behaviour.

Can we split this further into two commits?

> 
> This change also explains the limitations of of this method and the
> possibility of partial failure.
> 
> Finally, we pluralise language where it makes sense to so the documentation
> does not contradict either this new capability nor the pre-existing edge
> case.
> 
> Example code is enclosed below demonstrating the behaviour which is now
> possible:
> 
> int main(void)
> {
> 	unsigned long page_size = sysconf(_SC_PAGESIZE);
> 	void *ptr = mmap(NULL, 10 * page_size, PROT_READ | PROT_WRITE,
> 			 MAP_ANON | MAP_PRIVATE, -1, 0);
> 	void *tgt_ptr = mmap(NULL, 10 * page_size, PROT_NONE,
> 			     MAP_ANON | MAP_PRIVATE, -1, 0);
> 	int i;
> 
> 	if (ptr == MAP_FAILED || tgt_ptr == MAP_FAILED) {
> 		perror("mmap");
> 		return EXIT_FAILURE;
> 	}
> 
> 	/* Unmap every other page. */
> 	for (i = 1; i < 10; i += 2)
> 		munmap(ptr + i * page_size, page_size);
> 
> 	/* Now move all 5 distinct mappings to tgt_ptr. */
> 	ptr = mremap(ptr, 10 * page_size, 10 * page_size,
> 		     MREMAP_MAYMOVE | MREMAP_FIXED, tgt_ptr);
> 	if (ptr == MAP_FAILED) {
> 		perror("mremap");
> 		return EXIT_FAILURE;
> 	}
> 
> 	return EXIT_SUCCESS;
> }
> 
> Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
> ---
>  man/man2/mremap.2 | 84 ++++++++++++++++++++++++++++++++++++++++-------
>  1 file changed, 73 insertions(+), 11 deletions(-)
> 
> diff --git a/man/man2/mremap.2 b/man/man2/mremap.2
> index 2168ca728..6ba51310c 100644
> --- a/man/man2/mremap.2
> +++ b/man/man2/mremap.2
> @@ -25,18 +25,47 @@ moving it at the same time (controlled by the
>  argument and
>  the available virtual address space).
>  .P
> +Mappings can also simply be moved
> +(without any resizing)
> +by specifying equal
> +.I old_size
> +and
> +.I new_size
> +and using the
> +.B MREMAP_FIXED
> +flag
> +(see below).
> +Since Linux 6.17,
> +while
> +.I old_address
> +must reside within a mapping,

I don't understand this.  What does it mean that old_address must reside
within a mapping?  It's a point, not a size, so I'm not sure I
understand it.

> +.I old_size
> +may span multiple mappings
> +which do not have to be
> +adjacent to one another when
> +performing a move like this.
> +The
> +.B MREMAP_DONTUNMAP
> +flag may be specified.
> +.P
> +If the operation is not
> +simply moving mappings,
> +then
> +.I old_size
> +must span only a single mapping.
> +.P
>  .I old_address
> -is the old address of the virtual memory block that you
> -want to expand (or shrink).
> +is the old address of the first virtual memory block that you
> +want to expand, shrink, and/or move.
>  Note that
>  .I old_address
>  has to be page aligned.
>  .I old_size
> -is the old size of the
> -virtual memory block.
> +is the size of the range containing
> +virtual memory blocks to be manipulated.
>  .I new_size
>  is the requested size of the
> -virtual memory block after the resize.
> +virtual memory blocks after the resize.
>  An optional fifth argument,
>  .IR new_address ,
>  may be provided; see the description of
> @@ -105,13 +134,43 @@ If
>  is specified, then
>  .B MREMAP_MAYMOVE
>  must also be specified.
> +.IP
> +Since Linux 6.17,
> +if
> +.I old_size
> +is equal to
> +.I new_size
> +and
> +.B MREMAP_FIXED
> +is specified, then
> +.I old_size
> +may span beyond the mapping in which
> +.I old_address
> +resides.
> +In this case,
> +gaps between mappings in the original range
> +are maintained in the new range.
> +The whole operation is performed atomically
> +unless an error arises,
> +in which case the operation may be partially
> +completed,
> +that is,
> +some mappings may be moved and others not.
> +.IP
> +

Why this blank?


Cheers,
Alex

> +Moving multiple mappings is not permitted if
> +any of those mappings have either
> +been registered with
> +.BR userfaultfd (2) ,
> +or map drivers that
> +specify their own custom address mapping logic.
>  .TP
>  .BR MREMAP_DONTUNMAP " (since Linux 5.7)"
>  .\" commit e346b3813067d4b17383f975f197a9aa28a3b077
>  This flag, which must be used in conjunction with
>  .BR MREMAP_MAYMOVE ,
> -remaps a mapping to a new address but does not unmap the mapping at
> -.IR old_address .
> +remaps mappings to a new address but does not unmap them
> +from their original address.
>  .IP
>  The
>  .B MREMAP_DONTUNMAP
> @@ -149,13 +208,13 @@ mapped.
>  See NOTES for some possible applications of
>  .BR MREMAP_DONTUNMAP .
>  .P
> -If the memory segment specified by
> +If the memory segments specified by
>  .I old_address
>  and
>  .I old_size
> -is locked (using
> +are locked (using
>  .BR mlock (2)
> -or similar), then this lock is maintained when the segment is
> +or similar), then this lock is maintained when the segments are
>  resized and/or relocated.
>  As a consequence, the amount of memory locked by the process may change.
>  .SH RETURN VALUE
> @@ -188,7 +247,10 @@ virtual memory address for this process.
>  You can also get
>  .B EFAULT
>  even if there exist mappings that cover the
> -whole address space requested, but those mappings are of different types.
> +whole address space requested, but those mappings are of different types,
> +and the
> +.BR mremap ()
> +operation being performed does not support this.
>  .TP
>  .B EINVAL
>  An invalid argument was given.
> -- 
> 2.50.1
> 

-- 
<https://www.alejandro-colomar.es/>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v4 2/2] man/man2/mremap.2: describe previously undocumented shrink behaviour

[Alejandro Colomar]

[-- Attachment #1: Type: text/plain, Size: 2334 bytes --]

Hi Lorenzo,

On Tue, Aug 05, 2025 at 06:31:56PM +0100, Lorenzo Stoakes wrote:
> There is pre-existing logic that appears to be undocumented for an mremap()
> shrink operation, where it turns out that the usual 'input range must span
> a single mapping' requirement no longer applies.
> 
> In fact, it turns out that the input range specified by [old_address,
> old_address + old_size) may span any number of mappings.
> 
> If shrinking in-place (that is, neither the MREMAP_FIXED nor
> MREMAP_DONTUNMAP flags are specified), then the new span may also span any
> number of VMAs - [old_address, old_address + new_size).
> 
> If shrinking and moving, the range specified by [old_address, old_address +
> new_size) must span a single VMA.
> 
> There must be at least one VMA contained within the [old_address,
> old_address + old_size) range, and old_address must be within the range of
> a VMA.
> 
> Explicitly document this.
> 
> Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>

Since this is documenting old behavior, could we have this patch before
the patch documenting new behavior?  Or do you prefer it in this order?


Cheers,
Alex

> ---
>  man/man2/mremap.2 | 31 +++++++++++++++++++++++++++++--
>  1 file changed, 29 insertions(+), 2 deletions(-)
> 
> diff --git a/man/man2/mremap.2 b/man/man2/mremap.2
> index 6ba51310c..631c835b8 100644
> --- a/man/man2/mremap.2
> +++ b/man/man2/mremap.2
> @@ -48,8 +48,35 @@ The
>  .B MREMAP_DONTUNMAP
>  flag may be specified.
>  .P
> -If the operation is not
> -simply moving mappings,
> +Equally, if the operation performs a shrink,
> +that is if
> +.I old_size
> +is greater than
> +.IR new_size ,
> +then
> +.I old_size
> +may also span multiple mappings
> +which do not have to be
> +adjacent to one another.
> +If this shrink is performed
> +in-place,
> +that is,
> +neither
> +.BR MREMAP_FIXED ,
> +nor
> +.B MREMAP_DONTUNMAP
> +are specified,
> +.I new_size
> +may also span multiple VMAs.
> +However, if the range is moved,
> +then
> +.I new_size
> +must span only a single mapping.
> +.P
> +If the operation is neither a
> +.B MREMAP_FIXED
> +move
> +nor a shrink,
>  then
>  .I old_size
>  must span only a single mapping.
> -- 
> 2.50.1
> 

-- 
<https://www.alejandro-colomar.es/>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v4 1/2] man/man2/mremap.2: describe multiple mapping move

[Lorenzo Stoakes]

On Sat, Aug 09, 2025 at 04:25:18PM +0200, Alejandro Colomar wrote:
> Hi Lorenzo,
>
> On Tue, Aug 05, 2025 at 06:31:55PM +0100, Lorenzo Stoakes wrote:
> > Document the new behaviour introduced in Linux 6.17 whereby it is now
> > possible to move multiple mappings in a single operation, as long as the
> > operation is purely a move, that is old_size is equal to new_size and
> > MREMAP_FIXED is specified.
> >
> > To make things clearer, also describe this 'pure move' operation, before
> > expanding upon it to describe the newly introduced behaviour.
>
> Can we split this further into two commits?

OK can do.

>
> >
> > This change also explains the limitations of of this method and the
> > possibility of partial failure.
> >
> > Finally, we pluralise language where it makes sense to so the documentation
> > does not contradict either this new capability nor the pre-existing edge
> > case.
> >
> > Example code is enclosed below demonstrating the behaviour which is now
> > possible:
> >
> > int main(void)
> > {
> > 	unsigned long page_size = sysconf(_SC_PAGESIZE);
> > 	void *ptr = mmap(NULL, 10 * page_size, PROT_READ | PROT_WRITE,
> > 			 MAP_ANON | MAP_PRIVATE, -1, 0);
> > 	void *tgt_ptr = mmap(NULL, 10 * page_size, PROT_NONE,
> > 			     MAP_ANON | MAP_PRIVATE, -1, 0);
> > 	int i;
> >
> > 	if (ptr == MAP_FAILED || tgt_ptr == MAP_FAILED) {
> > 		perror("mmap");
> > 		return EXIT_FAILURE;
> > 	}
> >
> > 	/* Unmap every other page. */
> > 	for (i = 1; i < 10; i += 2)
> > 		munmap(ptr + i * page_size, page_size);
> >
> > 	/* Now move all 5 distinct mappings to tgt_ptr. */
> > 	ptr = mremap(ptr, 10 * page_size, 10 * page_size,
> > 		     MREMAP_MAYMOVE | MREMAP_FIXED, tgt_ptr);
> > 	if (ptr == MAP_FAILED) {
> > 		perror("mremap");
> > 		return EXIT_FAILURE;
> > 	}
> >
> > 	return EXIT_SUCCESS;
> > }
> >
> > Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
> > ---
> >  man/man2/mremap.2 | 84 ++++++++++++++++++++++++++++++++++++++++-------
> >  1 file changed, 73 insertions(+), 11 deletions(-)
> >
> > diff --git a/man/man2/mremap.2 b/man/man2/mremap.2
> > index 2168ca728..6ba51310c 100644
> > --- a/man/man2/mremap.2
> > +++ b/man/man2/mremap.2
> > @@ -25,18 +25,47 @@ moving it at the same time (controlled by the
> >  argument and
> >  the available virtual address space).
> >  .P
> > +Mappings can also simply be moved
> > +(without any resizing)
> > +by specifying equal
> > +.I old_size
> > +and
> > +.I new_size
> > +and using the
> > +.B MREMAP_FIXED
> > +flag
> > +(see below).
> > +Since Linux 6.17,
> > +while
> > +.I old_address
> > +must reside within a mapping,
>
> I don't understand this.  What does it mean that old_address must reside
> within a mapping?  It's a point, not a size, so I'm not sure I
> understand it.

I think if it were a size it would be more confusing no?

It's an address, the address must be located within an existing memory mapping.

Will replace with 'located' for clarity.

>
> > +.I old_size
> > +may span multiple mappings
> > +which do not have to be
> > +adjacent to one another when
> > +performing a move like this.
> > +The
> > +.B MREMAP_DONTUNMAP
> > +flag may be specified.
> > +.P
> > +If the operation is not
> > +simply moving mappings,
> > +then
> > +.I old_size
> > +must span only a single mapping.
> > +.P
> >  .I old_address
> > -is the old address of the virtual memory block that you
> > -want to expand (or shrink).
> > +is the old address of the first virtual memory block that you
> > +want to expand, shrink, and/or move.
> >  Note that
> >  .I old_address
> >  has to be page aligned.
> >  .I old_size
> > -is the old size of the
> > -virtual memory block.
> > +is the size of the range containing
> > +virtual memory blocks to be manipulated.
> >  .I new_size
> >  is the requested size of the
> > -virtual memory block after the resize.
> > +virtual memory blocks after the resize.
> >  An optional fifth argument,
> >  .IR new_address ,
> >  may be provided; see the description of
> > @@ -105,13 +134,43 @@ If
> >  is specified, then
> >  .B MREMAP_MAYMOVE
> >  must also be specified.
> > +.IP
> > +Since Linux 6.17,
> > +if
> > +.I old_size
> > +is equal to
> > +.I new_size
> > +and
> > +.B MREMAP_FIXED
> > +is specified, then
> > +.I old_size
> > +may span beyond the mapping in which
> > +.I old_address
> > +resides.
> > +In this case,
> > +gaps between mappings in the original range
> > +are maintained in the new range.
> > +The whole operation is performed atomically
> > +unless an error arises,
> > +in which case the operation may be partially
> > +completed,
> > +that is,
> > +some mappings may be moved and others not.
> > +.IP
> > +
>
> Why this blank?

Oops that was a mistake, will fix on respin.

>
>
> Cheers,
> Alex
>
> > +Moving multiple mappings is not permitted if
> > +any of those mappings have either
> > +been registered with
> > +.BR userfaultfd (2) ,
> > +or map drivers that
> > +specify their own custom address mapping logic.
> >  .TP
> >  .BR MREMAP_DONTUNMAP " (since Linux 5.7)"
> >  .\" commit e346b3813067d4b17383f975f197a9aa28a3b077
> >  This flag, which must be used in conjunction with
> >  .BR MREMAP_MAYMOVE ,
> > -remaps a mapping to a new address but does not unmap the mapping at
> > -.IR old_address .
> > +remaps mappings to a new address but does not unmap them
> > +from their original address.
> >  .IP
> >  The
> >  .B MREMAP_DONTUNMAP
> > @@ -149,13 +208,13 @@ mapped.
> >  See NOTES for some possible applications of
> >  .BR MREMAP_DONTUNMAP .
> >  .P
> > -If the memory segment specified by
> > +If the memory segments specified by
> >  .I old_address
> >  and
> >  .I old_size
> > -is locked (using
> > +are locked (using
> >  .BR mlock (2)
> > -or similar), then this lock is maintained when the segment is
> > +or similar), then this lock is maintained when the segments are
> >  resized and/or relocated.
> >  As a consequence, the amount of memory locked by the process may change.
> >  .SH RETURN VALUE
> > @@ -188,7 +247,10 @@ virtual memory address for this process.
> >  You can also get
> >  .B EFAULT
> >  even if there exist mappings that cover the
> > -whole address space requested, but those mappings are of different types.
> > +whole address space requested, but those mappings are of different types,
> > +and the
> > +.BR mremap ()
> > +operation being performed does not support this.
> >  .TP
> >  .B EINVAL
> >  An invalid argument was given.
> > --
> > 2.50.1
> >
>
> --
> <https://www.alejandro-colomar.es/>

Re: [PATCH v4 2/2] man/man2/mremap.2: describe previously undocumented shrink behaviour

[Lorenzo Stoakes]

On Sat, Aug 09, 2025 at 04:33:12PM +0200, Alejandro Colomar wrote:
> Hi Lorenzo,
>
> On Tue, Aug 05, 2025 at 06:31:56PM +0100, Lorenzo Stoakes wrote:
> > There is pre-existing logic that appears to be undocumented for an mremap()
> > shrink operation, where it turns out that the usual 'input range must span
> > a single mapping' requirement no longer applies.
> >
> > In fact, it turns out that the input range specified by [old_address,
> > old_address + old_size) may span any number of mappings.
> >
> > If shrinking in-place (that is, neither the MREMAP_FIXED nor
> > MREMAP_DONTUNMAP flags are specified), then the new span may also span any
> > number of VMAs - [old_address, old_address + new_size).
> >
> > If shrinking and moving, the range specified by [old_address, old_address +
> > new_size) must span a single VMA.
> >
> > There must be at least one VMA contained within the [old_address,
> > old_address + old_size) range, and old_address must be within the range of
> > a VMA.
> >
> > Explicitly document this.
> >
> > Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
>
> Since this is documenting old behavior, could we have this patch before
> the patch documenting new behavior?  Or do you prefer it in this order?

I think it's fine in this order, it's more convenient for me as it'd be a pain
to re-order otherwise, and we've waited ~20 years (or longer?) to document this
so a delay in ordering is probably fine :P

Cheers, Lorenzo

>
>
> Cheers,
> Alex
>
> > ---
> >  man/man2/mremap.2 | 31 +++++++++++++++++++++++++++++--
> >  1 file changed, 29 insertions(+), 2 deletions(-)
> >
> > diff --git a/man/man2/mremap.2 b/man/man2/mremap.2
> > index 6ba51310c..631c835b8 100644
> > --- a/man/man2/mremap.2
> > +++ b/man/man2/mremap.2
> > @@ -48,8 +48,35 @@ The
> >  .B MREMAP_DONTUNMAP
> >  flag may be specified.
> >  .P
> > -If the operation is not
> > -simply moving mappings,
> > +Equally, if the operation performs a shrink,
> > +that is if
> > +.I old_size
> > +is greater than
> > +.IR new_size ,
> > +then
> > +.I old_size
> > +may also span multiple mappings
> > +which do not have to be
> > +adjacent to one another.
> > +If this shrink is performed
> > +in-place,
> > +that is,
> > +neither
> > +.BR MREMAP_FIXED ,
> > +nor
> > +.B MREMAP_DONTUNMAP
> > +are specified,
> > +.I new_size
> > +may also span multiple VMAs.
> > +However, if the range is moved,
> > +then
> > +.I new_size
> > +must span only a single mapping.
> > +.P
> > +If the operation is neither a
> > +.B MREMAP_FIXED
> > +move
> > +nor a shrink,
> >  then
> >  .I old_size
> >  must span only a single mapping.
> > --
> > 2.50.1
> >
>
> --
> <https://www.alejandro-colomar.es/>

Re: [PATCH v4 1/2] man/man2/mremap.2: describe multiple mapping move

[Alejandro Colomar]

[-- Attachment #1: Type: text/plain, Size: 1212 bytes --]

Hi Lorenzo,

On Mon, Aug 11, 2025 at 06:30:38AM +0100, Lorenzo Stoakes wrote:
> > > +Mappings can also simply be moved
> > > +(without any resizing)
> > > +by specifying equal
> > > +.I old_size
> > > +and
> > > +.I new_size
> > > +and using the
> > > +.B MREMAP_FIXED
> > > +flag
> > > +(see below).
> > > +Since Linux 6.17,
> > > +while
> > > +.I old_address
> > > +must reside within a mapping,
> >
> > I don't understand this.  What does it mean that old_address must reside
> > within a mapping?  It's a point, not a size, so I'm not sure I
> > understand it.
> 
> I think if it were a size it would be more confusing no?
> 
> It's an address, the address must be located within an existing memory mapping.

What I don't understand is: how could you not comply with that?  Could
you pass some old_address that is in two mappings?  Being a single
address, that would be impossible, right?

> Will replace with 'located' for clarity.
> 
> >
> > > +.I old_size
> > > +may span multiple mappings
> > > +which do not have to be
> > > +adjacent to one another when
> > > +performing a move like this.


Have a lovely day!
Alex

-- 
<https://www.alejandro-colomar.es/>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v4 2/2] man/man2/mremap.2: describe previously undocumented shrink behaviour

[Alejandro Colomar]

[-- Attachment #1: Type: text/plain, Size: 552 bytes --]

On Mon, Aug 11, 2025 at 06:31:25AM +0100, Lorenzo Stoakes wrote:
> > Since this is documenting old behavior, could we have this patch before
> > the patch documenting new behavior?  Or do you prefer it in this order?
> 
> I think it's fine in this order, it's more convenient for me as it'd be a pain
> to re-order otherwise, and we've waited ~20 years (or longer?) to document this
> so a delay in ordering is probably fine :P
> 
> Cheers, Lorenzo

Okay, that's fine.  Thanks!


Cheers,
Alex

-- 
<https://www.alejandro-colomar.es/>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v4 1/2] man/man2/mremap.2: describe multiple mapping move

[Lorenzo Stoakes]

On Mon, Aug 11, 2025 at 11:20:05AM +0200, Alejandro Colomar wrote:
> Hi Lorenzo,
>
> On Mon, Aug 11, 2025 at 06:30:38AM +0100, Lorenzo Stoakes wrote:
> > > > +Mappings can also simply be moved
> > > > +(without any resizing)
> > > > +by specifying equal
> > > > +.I old_size
> > > > +and
> > > > +.I new_size
> > > > +and using the
> > > > +.B MREMAP_FIXED
> > > > +flag
> > > > +(see below).
> > > > +Since Linux 6.17,
> > > > +while
> > > > +.I old_address
> > > > +must reside within a mapping,
> > >
> > > I don't understand this.  What does it mean that old_address must reside
> > > within a mapping?  It's a point, not a size, so I'm not sure I
> > > understand it.
> >
> > I think if it were a size it would be more confusing no?
> >
> > It's an address, the address must be located within an existing memory mapping.
>
> What I don't understand is: how could you not comply with that?  Could
> you pass some old_address that is in two mappings?  Being a single
> address, that would be impossible, right?

It can be in an unmapped area. It's either in an unmapped area or a mapped one.

I could simply reword this as 'old_address must be mapped'?

>
> > Will replace with 'located' for clarity.
> >
> > >
> > > > +.I old_size
> > > > +may span multiple mappings
> > > > +which do not have to be
> > > > +adjacent to one another when
> > > > +performing a move like this.
>
>
> Have a lovely day!
> Alex
>
> --
> <https://www.alejandro-colomar.es/>

Re: [PATCH v4 1/2] man/man2/mremap.2: describe multiple mapping move

[Alejandro Colomar]

[-- Attachment #1: Type: text/plain, Size: 1766 bytes --]

On Mon, Aug 11, 2025 at 10:25:56AM +0100, Lorenzo Stoakes wrote:
> On Mon, Aug 11, 2025 at 11:20:05AM +0200, Alejandro Colomar wrote:
> > Hi Lorenzo,
> >
> > On Mon, Aug 11, 2025 at 06:30:38AM +0100, Lorenzo Stoakes wrote:
> > > > > +Mappings can also simply be moved
> > > > > +(without any resizing)
> > > > > +by specifying equal
> > > > > +.I old_size
> > > > > +and
> > > > > +.I new_size
> > > > > +and using the
> > > > > +.B MREMAP_FIXED
> > > > > +flag
> > > > > +(see below).
> > > > > +Since Linux 6.17,
> > > > > +while
> > > > > +.I old_address
> > > > > +must reside within a mapping,
> > > >
> > > > I don't understand this.  What does it mean that old_address must reside
> > > > within a mapping?  It's a point, not a size, so I'm not sure I
> > > > understand it.
> > >
> > > I think if it were a size it would be more confusing no?
> > >
> > > It's an address, the address must be located within an existing memory mapping.
> >
> > What I don't understand is: how could you not comply with that?  Could
> > you pass some old_address that is in two mappings?  Being a single
> > address, that would be impossible, right?
> 
> It can be in an unmapped area. It's either in an unmapped area or a mapped one.
> 
> I could simply reword this as 'old_address must be mapped'?

Yup, that seems better.  Thanks!

Cheers,
Alex

> > > Will replace with 'located' for clarity.
> > >
> > > >
> > > > > +.I old_size
> > > > > +may span multiple mappings
> > > > > +which do not have to be
> > > > > +adjacent to one another when
> > > > > +performing a move like this.
> >
> >
> > Have a lovely day!
> > Alex
> >
> > --
> > <https://www.alejandro-colomar.es/>

-- 
<https://www.alejandro-colomar.es/>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]