public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Can Guo <cang@codeaurora.org>
To: Avri Altman <avri.altman@wdc.com>
Cc: "James E . J . Bottomley" <jejb@linux.vnet.ibm.com>,
	"Martin K . Petersen" <martin.petersen@oracle.com>,
	linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org,
	gregkh@linuxfoundation.org, Bart Van Assche <bvanassche@acm.org>,
	yongmyung lee <ymhungry.lee@samsung.com>,
	Daejun Park <daejun7.park@samsung.com>,
	alim.akhtar@samsung.com, asutoshd@codeaurora.org,
	Zang Leigang <zangleigang@hisilicon.com>,
	Avi Shchislowski <avi.shchislowski@wdc.com>,
	Bean Huo <beanhuo@micron.com>,
	stanley.chu@mediatek.com
Subject: Re: [PATCH v5 07/10] scsi: ufshpb: Add "Cold" regions timer
Date: Mon, 15 Mar 2021 09:37:16 +0800	[thread overview]
Message-ID: <f42b0c8c424a448668c4903c784c2059@codeaurora.org> (raw)
In-Reply-To: <20210302132503.224670-8-avri.altman@wdc.com>

On 2021-03-02 21:25, Avri Altman wrote:
> In order not to hang on to “cold” regions, we shall inactivate a
> region that has no READ access for a predefined amount of time -
> READ_TO_MS. For that purpose we shall monitor the active regions list,
> polling it on every POLLING_INTERVAL_MS. On timeout expiry we shall add
> the region to the "to-be-inactivated" list, unless it is clean and did
> not exhaust its READ_TO_EXPIRIES - another parameter.
> 
> All this does not apply to pinned regions.
> 
> Signed-off-by: Avri Altman <avri.altman@wdc.com>
> ---
>  drivers/scsi/ufs/ufshpb.c | 65 +++++++++++++++++++++++++++++++++++++++
>  drivers/scsi/ufs/ufshpb.h |  6 ++++
>  2 files changed, 71 insertions(+)
> 
> diff --git a/drivers/scsi/ufs/ufshpb.c b/drivers/scsi/ufs/ufshpb.c
> index 0034fa03fdc6..89a930e72cff 100644
> --- a/drivers/scsi/ufs/ufshpb.c
> +++ b/drivers/scsi/ufs/ufshpb.c
> @@ -18,6 +18,9 @@
> 
>  #define ACTIVATION_THRESHOLD 4 /* 4 IOs */
>  #define EVICTION_THRESHOLD (ACTIVATION_THRESHOLD << 6) /* 256 IOs */
> +#define READ_TO_MS 1000
> +#define READ_TO_EXPIRIES 100
> +#define POLLING_INTERVAL_MS 200
> 
>  /* memory management */
>  static struct kmem_cache *ufshpb_mctx_cache;
> @@ -1024,12 +1027,61 @@ static int
> ufshpb_check_srgns_issue_state(struct ufshpb_lu *hpb,
>  	return 0;
>  }
> 
> +static void ufshpb_read_to_handler(struct work_struct *work)
> +{
> +	struct delayed_work *dwork = to_delayed_work(work);
> +	struct ufshpb_lu *hpb;

         struct ufshpb_lu *hpb = container_of(work, struct ufshpb_lu, 
ufshpb_read_to_work.work);

usually we use this to get data of a delayed work.

> +	struct victim_select_info *lru_info;

         struct victim_select_info *lru_info = &hpb->lru_info;

This can save some lines.

Thanks,
Can Guo.

> +	struct ufshpb_region *rgn;
> +	unsigned long flags;
> +	LIST_HEAD(expired_list);
> +
> +	spin_lock_irqsave(&hpb->rgn_state_lock, flags);
> +
> +	list_for_each_entry(rgn, &lru_info->lh_lru_rgn, list_lru_rgn) {
> +		bool timedout = ktime_after(ktime_get(), rgn->read_timeout);
> +
> +		if (timedout) {
> +			rgn->read_timeout_expiries--;
> +			if (is_rgn_dirty(rgn) ||
> +			    rgn->read_timeout_expiries == 0)
> +				list_add(&rgn->list_expired_rgn, &expired_list);
> +			else
> +				rgn->read_timeout = ktime_add_ms(ktime_get(),
> +							 READ_TO_MS);
> +		}
> +	}
> +
> +	spin_unlock_irqrestore(&hpb->rgn_state_lock, flags);
> +
> +	list_for_each_entry(rgn, &expired_list, list_expired_rgn) {
> +		list_del_init(&rgn->list_expired_rgn);
> +		spin_lock_irqsave(&hpb->rsp_list_lock, flags);
> +		ufshpb_update_inactive_info(hpb, rgn->rgn_idx);
> +		hpb->stats.rb_inactive_cnt++;
> +		spin_unlock_irqrestore(&hpb->rsp_list_lock, flags);
> +	}
> +
> +	ufshpb_kick_map_work(hpb);
> +
> +	schedule_delayed_work(&hpb->ufshpb_read_to_work,
> +			      msecs_to_jiffies(POLLING_INTERVAL_MS));
> +}
> +
>  static void ufshpb_add_lru_info(struct victim_select_info *lru_info,
>  				struct ufshpb_region *rgn)
>  {
>  	rgn->rgn_state = HPB_RGN_ACTIVE;
>  	list_add_tail(&rgn->list_lru_rgn, &lru_info->lh_lru_rgn);
>  	atomic_inc(&lru_info->active_cnt);
> +	if (rgn->hpb->is_hcm) {
> +		rgn->read_timeout = ktime_add_ms(ktime_get(), READ_TO_MS);
> +		rgn->read_timeout_expiries = READ_TO_EXPIRIES;
> +	}
>  }
> 
>  static void ufshpb_hit_lru_info(struct victim_select_info *lru_info,
> @@ -1813,6 +1865,7 @@ static int ufshpb_alloc_region_tbl(struct
> ufs_hba *hba, struct ufshpb_lu *hpb)
> 
>  		INIT_LIST_HEAD(&rgn->list_inact_rgn);
>  		INIT_LIST_HEAD(&rgn->list_lru_rgn);
> +		INIT_LIST_HEAD(&rgn->list_expired_rgn);
> 
>  		if (rgn_idx == hpb->rgns_per_lu - 1) {
>  			srgn_cnt = ((hpb->srgns_per_lu - 1) %
> @@ -1834,6 +1887,7 @@ static int ufshpb_alloc_region_tbl(struct
> ufs_hba *hba, struct ufshpb_lu *hpb)
>  		}
> 
>  		rgn->rgn_flags = 0;
> +		rgn->hpb = hpb;
>  	}
> 
>  	return 0;
> @@ -2053,6 +2107,8 @@ static int ufshpb_lu_hpb_init(struct ufs_hba
> *hba, struct ufshpb_lu *hpb)
>  			  ufshpb_normalization_work_handler);
>  		INIT_WORK(&hpb->ufshpb_lun_reset_work,
>  			  ufshpb_reset_work_handler);
> +		INIT_DELAYED_WORK(&hpb->ufshpb_read_to_work,
> +				  ufshpb_read_to_handler);
>  	}
> 
>  	hpb->map_req_cache = kmem_cache_create("ufshpb_req_cache",
> @@ -2087,6 +2143,10 @@ static int ufshpb_lu_hpb_init(struct ufs_hba
> *hba, struct ufshpb_lu *hpb)
>  	ufshpb_stat_init(hpb);
>  	ufshpb_param_init(hpb);
> 
> +	if (hpb->is_hcm)
> +		schedule_delayed_work(&hpb->ufshpb_read_to_work,
> +				      msecs_to_jiffies(POLLING_INTERVAL_MS));
> +
>  	return 0;
> 
>  release_pre_req_mempool:
> @@ -2154,6 +2214,7 @@ static void ufshpb_discard_rsp_lists(struct
> ufshpb_lu *hpb)
>  static void ufshpb_cancel_jobs(struct ufshpb_lu *hpb)
>  {
>  	if (hpb->is_hcm) {
> +		cancel_delayed_work_sync(&hpb->ufshpb_read_to_work);
>  		cancel_work_sync(&hpb->ufshpb_lun_reset_work);
>  		cancel_work_sync(&hpb->ufshpb_normalization_work);
>  	}
> @@ -2264,6 +2325,10 @@ void ufshpb_resume(struct ufs_hba *hba)
>  			continue;
>  		ufshpb_set_state(hpb, HPB_PRESENT);
>  		ufshpb_kick_map_work(hpb);
> +		if (hpb->is_hcm)
> +			schedule_delayed_work(&hpb->ufshpb_read_to_work,
> +				msecs_to_jiffies(POLLING_INTERVAL_MS));
> +
>  	}
>  }
> 
> diff --git a/drivers/scsi/ufs/ufshpb.h b/drivers/scsi/ufs/ufshpb.h
> index 37c1b0ea0c0a..b49e9a34267f 100644
> --- a/drivers/scsi/ufs/ufshpb.h
> +++ b/drivers/scsi/ufs/ufshpb.h
> @@ -109,6 +109,7 @@ struct ufshpb_subregion {
>  };
> 
>  struct ufshpb_region {
> +	struct ufshpb_lu *hpb;
>  	struct ufshpb_subregion *srgn_tbl;
>  	enum HPB_RGN_STATE rgn_state;
>  	int rgn_idx;
> @@ -126,6 +127,10 @@ struct ufshpb_region {
>  	/* region reads - for host mode */
>  	spinlock_t rgn_lock;
>  	unsigned int reads;
> +	/* region "cold" timer - for host mode */
> +	ktime_t read_timeout;
> +	unsigned int read_timeout_expiries;
> +	struct list_head list_expired_rgn;
>  };
> 
>  #define for_each_sub_region(rgn, i, srgn)				\
> @@ -219,6 +224,7 @@ struct ufshpb_lu {
>  	struct victim_select_info lru_info;
>  	struct work_struct ufshpb_normalization_work;
>  	struct work_struct ufshpb_lun_reset_work;
> +	struct delayed_work ufshpb_read_to_work;
> 
>  	/* pinned region information */
>  	u32 lu_pinned_start;

  reply	other threads:[~2021-03-15  1:38 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-02 13:24 [PATCH v5 00/10] Add Host control mode to HPB Avri Altman
2021-03-02 13:24 ` [PATCH v5 01/10] scsi: ufshpb: Cache HPB Control mode on init Avri Altman
2021-03-02 13:24 ` [PATCH v5 02/10] scsi: ufshpb: Add host control mode support to rsp_upiu Avri Altman
2021-03-02 13:24 ` [PATCH v5 03/10] scsi: ufshpb: Add region's reads counter Avri Altman
2021-03-11  7:52   ` Can Guo
2021-03-11  8:04     ` Avri Altman
2021-03-11  8:07       ` Can Guo
2021-03-15  3:16   ` Can Guo
2021-03-15  9:20     ` Avri Altman
2021-03-15  9:31       ` Can Guo
2021-03-17  9:19         ` Avri Altman
2021-03-15  8:40   ` Can Guo
2021-03-15  9:22     ` Avri Altman
2021-03-02 13:24 ` [PATCH v5 04/10] scsi: ufshpb: Make eviction depends on region's reads Avri Altman
2021-03-11  7:53   ` Can Guo
2021-03-11  8:06     ` Avri Altman
2021-03-15  8:30   ` Can Guo
2021-03-16  8:34     ` Avri Altman
2021-03-02 13:24 ` [PATCH v5 05/10] scsi: ufshpb: Region inactivation in host mode Avri Altman
2021-03-11  8:20   ` Can Guo
2021-03-11  9:03     ` Avri Altman
2021-03-15  4:02   ` Can Guo
2021-03-15  7:33     ` Can Guo
2021-03-16  8:30       ` Avri Altman
2021-03-17  1:23         ` Can Guo
2021-03-17  2:28         ` Daejun Park
2021-03-17  4:41           ` Can Guo
2021-03-17  5:19             ` Daejun Park
2021-03-17  5:34               ` Can Guo
2021-03-17  5:42                 ` Daejun Park
2021-03-17  7:59             ` Avri Altman
2021-03-02 13:24 ` [PATCH v5 06/10] scsi: ufshpb: Add hpb dev reset response Avri Altman
2021-03-15  1:34   ` Can Guo
2021-03-15  6:40     ` Can Guo
2021-03-15  7:42     ` Avri Altman
2021-03-17 10:56   ` Can Guo
2021-03-17 11:23     ` Avri Altman
2021-03-17 12:12       ` Can Guo
2021-03-17 12:22         ` Avri Altman
2021-03-17 13:50           ` Can Guo
2021-03-17 14:22             ` Avri Altman
2021-03-17 14:36               ` Can Guo
2021-03-17 15:46                 ` Avri Altman
2021-03-18  1:00                   ` Can Guo
2021-03-18  8:04                     ` Avri Altman
2021-03-02 13:25 ` [PATCH v5 07/10] scsi: ufshpb: Add "Cold" regions timer Avri Altman
2021-03-15  1:37   ` Can Guo [this message]
2021-03-15  7:54     ` Avri Altman
2021-03-15  9:36   ` Can Guo
2021-03-16  9:21     ` Avri Altman
2021-03-17  2:45       ` Can Guo
2021-03-17  7:55         ` Avri Altman
2021-06-01 16:22           ` Bart Van Assche
2021-03-02 13:25 ` [PATCH v5 08/10] scsi: ufshpb: Limit the number of inflight map requests Avri Altman
2021-03-15  8:31   ` Can Guo
2021-03-16  8:32     ` Avri Altman
2021-03-02 13:25 ` [PATCH v5 09/10] scsi: ufshpb: Add support for host control mode Avri Altman
2021-03-02 13:25 ` [PATCH v5 10/10] scsi: ufshpb: Make host mode parameters configurable Avri Altman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f42b0c8c424a448668c4903c784c2059@codeaurora.org \
    --to=cang@codeaurora.org \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avi.shchislowski@wdc.com \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=daejun7.park@samsung.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=stanley.chu@mediatek.com \
    --cc=ymhungry.lee@samsung.com \
    --cc=zangleigang@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox