public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Eva Rachel Retuya <eraretuya@gmail.com>,
	linux-iio@vger.kernel.org, devel@driverdev.osuosl.org,
	linux-kernel@vger.kernel.org
Cc: lars@metafoo.de, Michael.Hennerich@analog.com, knaack.h@gmx.de,
	pmeerw@pmeerw.net, gregkh@linuxfoundation.org
Subject: Re: [PATCH v3] staging: iio: cdc: ad7746: add additional config defines
Date: Sun, 30 Oct 2016 17:41:32 +0000	[thread overview]
Message-ID: <f59b10dc-e273-d147-611c-0fca52ee8bc0@kernel.org> (raw)
In-Reply-To: <1477643212-7200-1-git-send-email-eraretuya@gmail.com>

On 28/10/16 09:26, Eva Rachel Retuya wrote:
> Introduce defines for shifting and mask under the config register for
> better readability. Also, introduce helper variables for index
> calculation.
> 
> Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Looks good to me.

Lars could you sanity check this one as well?

Thanks,

Jonathan
> ---
> This patch might cause a conflict with this patch:
> staging: iio: cdc/ad7746: fix missing return value
> https://marc.info/?l=linux-driver-devel&m=147741283722806&w=2
> I am waiting to rebase to the branch where this commit is present but
> I was told it was not yet pushed to kernel.org
> 
> Changes in v3:
> * Make commit message more detailed.
> * Fix incorrect use of GENMASK.
> * Drop the AD7746_CONF_*FS(x) macros and use the mask and direct shifting where
>   needed.
> * With the proper masks set, invert the AND'ng and shifting on the index
>   calculations.
> 
> Changes in v2:
> * Use GENMASK to generate both VTFS and CAPFS masks including offset,
>   respectively.
> * Introduce helper variables for index calculation.
> 
>  drivers/staging/iio/cdc/ad7746.c | 38 ++++++++++++++++++++++----------------
>  1 file changed, 22 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
> index f41251c..e97658a 100644
> --- a/drivers/staging/iio/cdc/ad7746.c
> +++ b/drivers/staging/iio/cdc/ad7746.c
> @@ -70,8 +70,10 @@
>  #define AD7746_EXCSETUP_EXCLVL(x)	(((x) & 0x3) << 0)
>  
>  /* Config Register Bit Designations (AD7746_REG_CFG) */
> -#define AD7746_CONF_VTFS(x)		((x) << 6)
> -#define AD7746_CONF_CAPFS(x)		((x) << 3)
> +#define AD7746_CONF_VTFS_SHIFT		6
> +#define AD7746_CONF_CAPFS_SHIFT		3
> +#define AD7746_CONF_VTFS_MASK		GENMASK(7, 6)
> +#define AD7746_CONF_CAPFS_MASK		GENMASK(5, 3)
>  #define AD7746_CONF_MODE_IDLE		(0 << 0)
>  #define AD7746_CONF_MODE_CONT_CONV	(1 << 0)
>  #define AD7746_CONF_MODE_SINGLE_CONV	(2 << 0)
> @@ -217,15 +219,16 @@ static int ad7746_select_channel(struct iio_dev *indio_dev,
>  			    struct iio_chan_spec const *chan)
>  {
>  	struct ad7746_chip_info *chip = iio_priv(indio_dev);
> -	int ret, delay;
> +	int ret, delay, idx;
>  	u8 vt_setup, cap_setup;
>  
>  	switch (chan->type) {
>  	case IIO_CAPACITANCE:
>  		cap_setup = (chan->address & 0xFF) | AD7746_CAPSETUP_CAPEN;
>  		vt_setup = chip->vt_setup & ~AD7746_VTSETUP_VTEN;
> -		delay = ad7746_cap_filter_rate_table[(chip->config >> 3) &
> -			0x7][1];
> +		idx = (chip->config & AD7746_CONF_CAPFS_MASK) >>
> +			AD7746_CONF_CAPFS_SHIFT;
> +		delay = ad7746_cap_filter_rate_table[idx][1];
>  
>  		if (chip->capdac_set != chan->channel) {
>  			ret = i2c_smbus_write_byte_data(chip->client,
> @@ -246,8 +249,9 @@ static int ad7746_select_channel(struct iio_dev *indio_dev,
>  	case IIO_TEMP:
>  		vt_setup = (chan->address & 0xFF) | AD7746_VTSETUP_VTEN;
>  		cap_setup = chip->cap_setup & ~AD7746_CAPSETUP_CAPEN;
> -		delay = ad7746_cap_filter_rate_table[(chip->config >> 6) &
> -			0x3][1];
> +		idx = (chip->config & AD7746_CONF_VTFS_MASK) >>
> +			AD7746_CONF_VTFS_SHIFT;
> +		delay = ad7746_cap_filter_rate_table[idx][1];
>  		break;
>  	default:
>  		return -EINVAL;
> @@ -369,8 +373,8 @@ static int ad7746_store_cap_filter_rate_setup(struct ad7746_chip_info *chip,
>  	if (i >= ARRAY_SIZE(ad7746_cap_filter_rate_table))
>  		i = ARRAY_SIZE(ad7746_cap_filter_rate_table) - 1;
>  
> -	chip->config &= ~AD7746_CONF_CAPFS(0x7);
> -	chip->config |= AD7746_CONF_CAPFS(i);
> +	chip->config &= ~AD7746_CONF_CAPFS_MASK;
> +	chip->config |= i << AD7746_CONF_CAPFS_SHIFT;
>  
>  	return 0;
>  }
> @@ -387,8 +391,8 @@ static int ad7746_store_vt_filter_rate_setup(struct ad7746_chip_info *chip,
>  	if (i >= ARRAY_SIZE(ad7746_vt_filter_rate_table))
>  		i = ARRAY_SIZE(ad7746_vt_filter_rate_table) - 1;
>  
> -	chip->config &= ~AD7746_CONF_VTFS(0x3);
> -	chip->config |= AD7746_CONF_VTFS(i);
> +	chip->config &= ~AD7746_CONF_VTFS_MASK;
> +	chip->config |= i << AD7746_CONF_VTFS_SHIFT;
>  
>  	return 0;
>  }
> @@ -527,7 +531,7 @@ static int ad7746_read_raw(struct iio_dev *indio_dev,
>  			   long mask)
>  {
>  	struct ad7746_chip_info *chip = iio_priv(indio_dev);
> -	int ret, delay;
> +	int ret, delay, idx;
>  	u8 regval, reg;
>  
>  	mutex_lock(&indio_dev->mlock);
> @@ -635,13 +639,15 @@ static int ad7746_read_raw(struct iio_dev *indio_dev,
>  	case IIO_CHAN_INFO_SAMP_FREQ:
>  		switch (chan->type) {
>  		case IIO_CAPACITANCE:
> -			*val = ad7746_cap_filter_rate_table[
> -					(chip->config >> 3) & 0x7][0];
> +			idx = (chip->config & AD7746_CONF_CAPFS_MASK) >>
> +				AD7746_CONF_CAPFS_SHIFT;
> +			*val = ad7746_cap_filter_rate_table[idx][0];
>  			ret = IIO_VAL_INT;
>  			break;
>  		case IIO_VOLTAGE:
> -			*val = ad7746_vt_filter_rate_table[
> -					(chip->config >> 6) & 0x3][0];
> +			idx = (chip->config & AD7746_CONF_VTFS_MASK) >>
> +				AD7746_CONF_VTFS_SHIFT;
> +			*val = ad7746_vt_filter_rate_table[idx][0];
>  			break;
>  		default:
>  			ret = -EINVAL;
> 

  reply	other threads:[~2016-10-30 17:41 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-28  8:26 [PATCH v3] staging: iio: cdc: ad7746: add additional config defines Eva Rachel Retuya
2016-10-30 17:41 ` Jonathan Cameron [this message]
2016-10-30 17:46   ` Lars-Peter Clausen
2016-10-30 18:49     ` Jonathan Cameron
2016-10-31  7:49       ` Eva Rachel Retuya
2016-10-31  8:05         ` Eva Rachel Retuya
2016-11-01 18:35           ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f59b10dc-e273-d147-611c-0fca52ee8bc0@kernel.org \
    --to=jic23@kernel.org \
    --cc=Michael.Hennerich@analog.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=eraretuya@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox