Re: [PATCH v7 1/4] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs

[Krishna Kurapati PSSNV <krishna.kurapati@oss.qualcomm.com>]

On 10/16/2025 12:59 PM, Konrad Dybcio wrote:
> On 10/15/25 12:52 PM, Krishna Kurapati wrote:
>> From: Wesley Cheng <quic_wcheng@quicinc.com>
>>
>> Add the base USB devicetree definitions for SM8750 platforms.  The overall
>> chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
>> (rev. v8) and M31 eUSB2 PHY.  The major difference for SM8750 is the
>> transition to using the M31 eUSB2 PHY compared to previous SoCs.
>>
>> Enable USB support on SM8750 MTP and QRD variants. SM8750 has a QMP combo
>> PHY for the SSUSB path, and a M31 eUSB2 PHY for the HSUSB path.
>>
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
>> Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
>> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
>> ---
> 
> [...]
> 
>> +		usb_1: usb@a6f8800 {
>> +			compatible = "qcom,sm8750-dwc3", "qcom,dwc3";
>> +			reg = <0x0 0x0a6f8800 0x0 0x400>;
> 
> Please resend this using the flattened model
> 

Hi Konrad,

  I didn't want to disturb an ACKed series and hence I just tested and 
resent the patches as it. I will flatten it out once this is merged. 
Hope that would be fine.

Regards,
Krishna,