Re: [PATCH v5 05/11] ACPI: CPPC: add APIs and sysfs interface for min/max_perf

["zhenglifeng (A)" <zhenglifeng1@huawei.com>]

On 2025/12/23 20:13, Sumit Gupta wrote:
> Add cppc_get/set_min_perf() and cppc_get/set_max_perf() APIs to read and
> write the MIN_PERF and MAX_PERF registers.
> 
> Also add sysfs interfaces (min_perf, max_perf) in cppc_cpufreq driver
> to expose these controls to userspace. The sysfs values are in frequency
> (kHz) for consistency with other cpufreq sysfs files.
> 
> A mutex is used to serialize sysfs store operations to ensure hardware
> register writes and perf_ctrls updates are atomic.
> 
> Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
> ---
>  drivers/acpi/cppc_acpi.c       |  44 +++++++++
>  drivers/cpufreq/cppc_cpufreq.c | 160 +++++++++++++++++++++++++++++++++
>  include/acpi/cppc_acpi.h       |  20 +++++
>  3 files changed, 224 insertions(+)
> 
> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
> index 403ee988a8c6..9f28c20d902d 100644
> --- a/drivers/acpi/cppc_acpi.c
> +++ b/drivers/acpi/cppc_acpi.c
> @@ -1742,6 +1742,50 @@ int cppc_set_auto_sel(int cpu, bool enable)
>  }
>  EXPORT_SYMBOL_GPL(cppc_set_auto_sel);
>  
> +/**
> + * cppc_get_min_perf - Read minimum performance register.
> + * @cpu: CPU from which to read register.
> + * @min_perf: Return address.
> + */
> +int cppc_get_min_perf(int cpu, u64 *min_perf)
> +{
> +	return cppc_get_reg_val(cpu, MIN_PERF, min_perf);
> +}
> +EXPORT_SYMBOL_GPL(cppc_get_min_perf);
> +
> +/**
> + * cppc_set_min_perf - Write minimum performance register.
> + * @cpu: CPU to which to write register.
> + * @min_perf: the desired minimum performance value to be updated.
> + */
> +int cppc_set_min_perf(int cpu, u32 min_perf)
> +{
> +	return cppc_set_reg_val(cpu, MIN_PERF, min_perf);
> +}
> +EXPORT_SYMBOL_GPL(cppc_set_min_perf);
> +
> +/**
> + * cppc_get_max_perf - Read maximum performance register.
> + * @cpu: CPU from which to read register.
> + * @max_perf: Return address.
> + */
> +int cppc_get_max_perf(int cpu, u64 *max_perf)
> +{
> +	return cppc_get_reg_val(cpu, MAX_PERF, max_perf);
> +}
> +EXPORT_SYMBOL_GPL(cppc_get_max_perf);
> +
> +/**
> + * cppc_set_max_perf - Write maximum performance register.
> + * @cpu: CPU to which to write register.
> + * @max_perf: the desired maximum performance value to be updated.
> + */
> +int cppc_set_max_perf(int cpu, u32 max_perf)
> +{
> +	return cppc_set_reg_val(cpu, MAX_PERF, max_perf);
> +}
> +EXPORT_SYMBOL_GPL(cppc_set_max_perf);
> +
>  /**
>   * cppc_set_enable - Set to enable CPPC on the processor by writing the
>   * Continuous Performance Control package EnableRegister field.
> diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
> index a87e7bb2e2f1..1e282dfabc76 100644
> --- a/drivers/cpufreq/cppc_cpufreq.c
> +++ b/drivers/cpufreq/cppc_cpufreq.c
> @@ -28,6 +28,8 @@
>  
>  static struct cpufreq_driver cppc_cpufreq_driver;
>  
> +static DEFINE_MUTEX(cppc_cpufreq_update_autosel_config_lock);
> +
>  #ifdef CONFIG_ACPI_CPPC_CPUFREQ_FIE
>  static enum {
>  	FIE_UNSET = -1,
> @@ -538,6 +540,46 @@ static void populate_efficiency_class(void)
>  }
>  #endif
>  
> +/**
> + * cppc_cpufreq_set_mperf_limit - Set min/max performance limit
> + * @policy: cpufreq policy
> + * @val: performance value to set
> + * @is_min: true for min_perf, false for max_perf
> + */
> +static int cppc_cpufreq_set_mperf_limit(struct cpufreq_policy *policy, u64 val,
> +					bool is_min)
> +{
> +	struct cppc_cpudata *cpu_data = policy->driver_data;
> +	struct cppc_perf_caps *caps = &cpu_data->perf_caps;
> +	unsigned int cpu = policy->cpu;
> +	u32 perf;
> +	int ret;
> +
> +	perf = clamp(val, caps->lowest_perf, caps->highest_perf);
> +
> +	ret = is_min ? cppc_set_min_perf(cpu, perf) :
> +		       cppc_set_max_perf(cpu, perf);
> +	if (ret) {
> +		if (ret != -EOPNOTSUPP)
> +			pr_warn("Failed to set %s_perf (%llu) on CPU%d (%d)\n",
> +				is_min ? "min" : "max", (u64)perf, cpu, ret);
> +		return ret;
> +	}
> +
> +	if (is_min)
> +		cpu_data->perf_ctrls.min_perf = perf;
> +	else
> +		cpu_data->perf_ctrls.max_perf = perf;
> +
> +	return 0;
> +}
> +
> +#define cppc_cpufreq_set_min_perf(policy, val) \
> +	cppc_cpufreq_set_mperf_limit(policy, val, true)
> +
> +#define cppc_cpufreq_set_max_perf(policy, val) \
> +	cppc_cpufreq_set_mperf_limit(policy, val, false)
> +
>  static struct cppc_cpudata *cppc_cpufreq_get_cpu_data(unsigned int cpu)
>  {
>  	struct cppc_cpudata *cpu_data;
> @@ -896,16 +938,134 @@ store_energy_performance_preference_val(struct cpufreq_policy *policy,
>  					    buf, count);
>  }
>  
> +/**
> + * show_min_perf - Show minimum performance as frequency (kHz)
> + * @policy: cpufreq policy
> + * @buf: buffer to write the frequency value to
> + *
> + * Reads the MIN_PERF register and converts the performance value to
> + * frequency (kHz).
> + */
> +static ssize_t show_min_perf(struct cpufreq_policy *policy, char *buf)
> +{
> +	struct cppc_cpudata *cpu_data = policy->driver_data;
> +	u64 perf;
> +	int ret;
> +
> +	ret = cppc_get_min_perf(policy->cpu, &perf);
> +	if (ret == -EOPNOTSUPP)
> +		return sysfs_emit(buf, "<unsupported>\n");
> +	if (ret)
> +		return ret;
> +
> +	/* Convert performance to frequency (kHz) for user */
> +	return sysfs_emit(buf, "%u\n",
> +			  cppc_perf_to_khz(&cpu_data->perf_caps, perf));
> +}
> +
> +/**
> + * store_min_perf - Set minimum performance from frequency (kHz)
> + * @policy: cpufreq policy
> + * @buf: buffer containing the frequency value
> + * @count: size of @buf
> + *
> + * Converts the user-provided frequency (kHz) to a performance value
> + * and writes it to the MIN_PERF register.
> + */
> +static ssize_t store_min_perf(struct cpufreq_policy *policy, const char *buf,
> +			      size_t count)
> +{
> +	struct cppc_cpudata *cpu_data = policy->driver_data;
> +	unsigned int freq_khz;
> +	u64 perf;
> +	int ret;
> +
> +	ret = kstrtouint(buf, 0, &freq_khz);
> +	if (ret)
> +		return ret;
> +
> +	/* Convert frequency (kHz) to performance value */
> +	perf = cppc_khz_to_perf(&cpu_data->perf_caps, freq_khz);
> +
> +	guard(mutex)(&cppc_cpufreq_update_autosel_config_lock);
> +	ret = cppc_cpufreq_set_min_perf(policy, perf);

Clamping value, calling cppc_set_min_perf(), setting
cpu_data->perf_ctrls.min_perf. These things can be accomplished with three
or four more lines of code here. I don't think
cppc_cpufreq_set_mperf_limit() is necessary. Same as in store_max_perf().

> +	if (ret)
> +		return ret;
> +
> +	return count;
> +}
> +
> +/**
> + * show_max_perf - Show maximum performance as frequency (kHz)
> + * @policy: cpufreq policy
> + * @buf: buffer to write the frequency value to
> + *
> + * Reads the MAX_PERF register and converts the performance value to
> + * frequency (kHz).
> + */
> +static ssize_t show_max_perf(struct cpufreq_policy *policy, char *buf)
> +{
> +	struct cppc_cpudata *cpu_data = policy->driver_data;
> +	u64 perf;
> +	int ret;
> +
> +	ret = cppc_get_max_perf(policy->cpu, &perf);
> +	if (ret == -EOPNOTSUPP)
> +		return sysfs_emit(buf, "<unsupported>\n");
> +	if (ret)
> +		return ret;
> +
> +	/* Convert performance to frequency (kHz) for user */
> +	return sysfs_emit(buf, "%u\n",
> +			  cppc_perf_to_khz(&cpu_data->perf_caps, perf));
> +}
> +
> +/**
> + * store_max_perf - Set maximum performance from frequency (kHz)
> + * @policy: cpufreq policy
> + * @buf: buffer containing the frequency value
> + * @count: size of @buf
> + *
> + * Converts the user-provided frequency (kHz) to a performance value
> + * and writes it to the MAX_PERF register.
> + */
> +static ssize_t store_max_perf(struct cpufreq_policy *policy, const char *buf,
> +			      size_t count)
> +{
> +	struct cppc_cpudata *cpu_data = policy->driver_data;
> +	unsigned int freq_khz;
> +	u64 perf;
> +	int ret;
> +
> +	ret = kstrtouint(buf, 0, &freq_khz);
> +	if (ret)
> +		return ret;
> +
> +	/* Convert frequency (kHz) to performance value */
> +	perf = cppc_khz_to_perf(&cpu_data->perf_caps, freq_khz);
> +
> +	guard(mutex)(&cppc_cpufreq_update_autosel_config_lock);
> +	ret = cppc_cpufreq_set_max_perf(policy, perf);
> +	if (ret)
> +		return ret;
> +
> +	return count;
> +}
> +
>  cpufreq_freq_attr_ro(freqdomain_cpus);
>  cpufreq_freq_attr_rw(auto_select);
>  cpufreq_freq_attr_rw(auto_act_window);
>  cpufreq_freq_attr_rw(energy_performance_preference_val);
> +cpufreq_freq_attr_rw(min_perf);
> +cpufreq_freq_attr_rw(max_perf);
>  
>  static struct freq_attr *cppc_cpufreq_attr[] = {
>  	&freqdomain_cpus,
>  	&auto_select,
>  	&auto_act_window,
>  	&energy_performance_preference_val,
> +	&min_perf,
> +	&max_perf,
>  	NULL,
>  };
>  
> diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h
> index 2860a0252313..a49b50bddaf9 100644
> --- a/include/acpi/cppc_acpi.h
> +++ b/include/acpi/cppc_acpi.h
> @@ -173,6 +173,10 @@ extern int cppc_get_auto_act_window(int cpu, u64 *auto_act_window);
>  extern int cppc_set_auto_act_window(int cpu, u64 auto_act_window);
>  extern int cppc_get_auto_sel(int cpu, bool *enable);
>  extern int cppc_set_auto_sel(int cpu, bool enable);
> +extern int cppc_get_min_perf(int cpu, u64 *min_perf);
> +extern int cppc_set_min_perf(int cpu, u32 min_perf);
> +extern int cppc_get_max_perf(int cpu, u64 *max_perf);
> +extern int cppc_set_max_perf(int cpu, u32 max_perf);
>  extern int amd_get_highest_perf(unsigned int cpu, u32 *highest_perf);
>  extern int amd_get_boost_ratio_numerator(unsigned int cpu, u64 *numerator);
>  extern int amd_detect_prefcore(bool *detected);
> @@ -265,6 +269,22 @@ static inline int cppc_set_auto_sel(int cpu, bool enable)
>  {
>  	return -EOPNOTSUPP;
>  }
> +static inline int cppc_get_min_perf(int cpu, u64 *min_perf)
> +{
> +	return -EOPNOTSUPP;
> +}
> +static inline int cppc_set_min_perf(int cpu, u32 min_perf)
> +{
> +	return -EOPNOTSUPP;
> +}
> +static inline int cppc_get_max_perf(int cpu, u64 *max_perf)
> +{
> +	return -EOPNOTSUPP;
> +}
> +static inline int cppc_set_max_perf(int cpu, u32 max_perf)
> +{
> +	return -EOPNOTSUPP;
> +}
>  static inline int amd_get_highest_perf(unsigned int cpu, u32 *highest_perf)
>  {
>  	return -ENODEV;