From: Lizhi Hou <lizhi.hou@amd.com>
To: Mario Limonciello <mario.limonciello@amd.com>,
<ogabbay@kernel.org>, <quic_jhugo@quicinc.com>,
<dri-devel@lists.freedesktop.org>,
<maciej.falkowski@linux.intel.com>
Cc: <linux-kernel@vger.kernel.org>, <max.zhen@amd.com>,
<sonal.santan@amd.com>
Subject: Re: [PATCH V1] accel/amdxdna: Remove hardware context status
Date: Tue, 3 Feb 2026 09:25:46 -0800 [thread overview]
Message-ID: <fae549e2-e581-b7f8-b67c-b7bc52cf13bf@amd.com> (raw)
In-Reply-To: <f7f9aa14-6fdb-4470-be51-edac7b54cf4f@amd.com>
Applied to drm-misc-next-fixes
On 2/3/26 06:04, Mario Limonciello wrote:
> On 2/2/26 3:24 PM, Lizhi Hou wrote:
>> One newly supported command does not require hardware context
>> configuration
>> to be performed upfront. As a result, checking hardware context status
>> causes this command to fail incorrectly.
>>
>> Remove hardware context status handling entirely. For other commands,
>> if userspace submits a request without configuring the hardware context
>> first, the firmware will report an error or time out as appropriate.
>>
>> Fixes: aac243092b70 ("accel/amdxdna: Add command execution")
>> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
>> ---
>> drivers/accel/amdxdna/aie2_ctx.c | 25 ++-----------------------
>> drivers/accel/amdxdna/aie2_message.c | 3 +++
>> drivers/accel/amdxdna/amdxdna_ctx.h | 5 -----
>> 3 files changed, 5 insertions(+), 28 deletions(-)
>>
>> diff --git a/drivers/accel/amdxdna/aie2_ctx.c
>> b/drivers/accel/amdxdna/aie2_ctx.c
>> index 208ac5b0579e..db0658fa03b9 100644
>> --- a/drivers/accel/amdxdna/aie2_ctx.c
>> +++ b/drivers/accel/amdxdna/aie2_ctx.c
>> @@ -56,17 +56,6 @@ static void aie2_job_put(struct amdxdna_sched_job
>> *job)
>> kref_put(&job->refcnt, aie2_job_release);
>> }
>> -static void aie2_hwctx_status_shift_stop(struct amdxdna_hwctx *hwctx)
>> -{
>> - hwctx->old_status = hwctx->status;
>> - hwctx->status = HWCTX_STAT_STOP;
>> -}
>> -
>> -static void aie2_hwctx_status_restore(struct amdxdna_hwctx *hwctx)
>> -{
>> - hwctx->status = hwctx->old_status;
>> -}
>> -
>> /* The bad_job is used in aie2_sched_job_timedout, otherwise, set
>> it to NULL */
>> static void aie2_hwctx_stop(struct amdxdna_dev *xdna, struct
>> amdxdna_hwctx *hwctx,
>> struct drm_sched_job *bad_job)
>> @@ -93,11 +82,6 @@ static int aie2_hwctx_restart(struct amdxdna_dev
>> *xdna, struct amdxdna_hwctx *hw
>> goto out;
>> }
>> - if (hwctx->status != HWCTX_STAT_READY) {
>> - XDNA_DBG(xdna, "hwctx is not ready, status %d", hwctx->status);
>> - goto out;
>> - }
>> -
>> ret = aie2_config_cu(hwctx, NULL);
>> if (ret) {
>> XDNA_ERR(xdna, "Config cu failed, ret %d", ret);
>> @@ -149,7 +133,6 @@ static int aie2_hwctx_suspend_cb(struct
>> amdxdna_hwctx *hwctx, void *arg)
>> aie2_hwctx_wait_for_idle(hwctx);
>> aie2_hwctx_stop(xdna, hwctx, NULL);
>> - aie2_hwctx_status_shift_stop(hwctx);
>> return 0;
>> }
>> @@ -171,7 +154,6 @@ static int aie2_hwctx_resume_cb(struct
>> amdxdna_hwctx *hwctx, void *arg)
>> {
>> struct amdxdna_dev *xdna = hwctx->client->xdna;
>> - aie2_hwctx_status_restore(hwctx);
>> return aie2_hwctx_restart(xdna, hwctx);
>> }
>> @@ -334,7 +316,7 @@ aie2_sched_job_run(struct drm_sched_job
>> *sched_job)
>> struct dma_fence *fence;
>> int ret;
>> - if (hwctx->status != HWCTX_STAT_READY)
>> + if (!hwctx->priv->mbox_chann)
>> return NULL;
>> if (!mmget_not_zero(job->mm))
>> @@ -716,7 +698,6 @@ int aie2_hwctx_init(struct amdxdna_hwctx *hwctx)
>> }
>> amdxdna_pm_suspend_put(xdna);
>> - hwctx->status = HWCTX_STAT_INIT;
>> init_waitqueue_head(&priv->job_free_wq);
>> XDNA_DBG(xdna, "hwctx %s init completed", hwctx->name);
>> @@ -760,7 +741,6 @@ void aie2_hwctx_fini(struct amdxdna_hwctx *hwctx)
>> /* Request fw to destroy hwctx and cancel the rest pending
>> requests */
>> drm_sched_stop(&hwctx->priv->sched, NULL);
>> aie2_release_resource(hwctx);
>> - hwctx->status = HWCTX_STAT_STOP;
>> drm_sched_start(&hwctx->priv->sched, 0);
>> mutex_unlock(&xdna->dev_lock);
>> @@ -805,7 +785,7 @@ static int aie2_hwctx_cu_config(struct
>> amdxdna_hwctx *hwctx, void *buf, u32 size
>> if (XDNA_MBZ_DBG(xdna, config->pad, sizeof(config->pad)))
>> return -EINVAL;
>> - if (hwctx->status != HWCTX_STAT_INIT) {
>> + if (hwctx->cus) {
>> XDNA_ERR(xdna, "Not support re-config CU");
>> return -EINVAL;
>> }
>> @@ -836,7 +816,6 @@ static int aie2_hwctx_cu_config(struct
>> amdxdna_hwctx *hwctx, void *buf, u32 size
>> }
>> wmb(); /* To avoid locking in command submit when check
>> status */
>> - hwctx->status = HWCTX_STAT_READY;
>> return 0;
>> diff --git a/drivers/accel/amdxdna/aie2_message.c
>> b/drivers/accel/amdxdna/aie2_message.c
>> index 578eaa7bf137..53e13858077b 100644
>> --- a/drivers/accel/amdxdna/aie2_message.c
>> +++ b/drivers/accel/amdxdna/aie2_message.c
>> @@ -493,6 +493,9 @@ int aie2_config_cu(struct amdxdna_hwctx *hwctx,
>> if (!chann)
>> return -ENODEV;
>> + if (!hwctx->cus)
>> + return 0;
>> +
>> if (hwctx->cus->num_cus > MAX_NUM_CUS) {
>> XDNA_DBG(xdna, "Exceed maximum CU %d", MAX_NUM_CUS);
>> return -EINVAL;
>> diff --git a/drivers/accel/amdxdna/amdxdna_ctx.h
>> b/drivers/accel/amdxdna/amdxdna_ctx.h
>> index 4f641926a272..e90204edfb7d 100644
>> --- a/drivers/accel/amdxdna/amdxdna_ctx.h
>> +++ b/drivers/accel/amdxdna/amdxdna_ctx.h
>> @@ -107,11 +107,6 @@ struct amdxdna_hwctx {
>> u32 start_col;
>> u32 num_col;
>> u32 num_unused_col;
>> -#define HWCTX_STAT_INIT 0
>> -#define HWCTX_STAT_READY 1
>> -#define HWCTX_STAT_STOP 2
>> - u32 status;
>> - u32 old_status;
>> struct amdxdna_qos_info qos;
>> struct amdxdna_hwctx_param_config_cu *cus;
>
prev parent reply other threads:[~2026-02-03 17:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-02 21:24 [PATCH V1] accel/amdxdna: Remove hardware context status Lizhi Hou
2026-02-03 14:04 ` Mario Limonciello
2026-02-03 17:25 ` Lizhi Hou [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fae549e2-e581-b7f8-b67c-b7bc52cf13bf@amd.com \
--to=lizhi.hou@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.falkowski@linux.intel.com \
--cc=mario.limonciello@amd.com \
--cc=max.zhen@amd.com \
--cc=ogabbay@kernel.org \
--cc=quic_jhugo@quicinc.com \
--cc=sonal.santan@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox