From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933222AbXHVVDK (ORCPT ); Wed, 22 Aug 2007 17:03:10 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932434AbXHVVCy (ORCPT ); Wed, 22 Aug 2007 17:02:54 -0400 Received: from main.gmane.org ([80.91.229.2]:47156 "EHLO ciao.gmane.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932426AbXHVVCy (ORCPT ); Wed, 22 Aug 2007 17:02:54 -0400 X-Injected-Via-Gmane: http://gmane.org/ To: linux-kernel@vger.kernel.org From: Manuel Reimer Subject: TV card detected wrongly by the kernel. Any chance to get this fixed? Date: Wed, 22 Aug 2007 23:08:00 +0200 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Complaints-To: usenet@sea.gmane.org X-Gmane-NNTP-Posting-Host: p4fd4c3cb.dip0.t-ipconnect.de User-Agent: Mozilla/5.0 (X11; U; Linux i686; de-AT; rv:1.8.1.6) Gecko/20070809 SeaMonkey/1.1.4 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, I have a BT878 based TV card (was sold by a german discounter some years ago). Unfortunately this card gets detected wrongly and so I'm unable to watch tv, if I allow the kernel to auto-detect the card. If I unload the module and reload it using the right "card=" value, then anything works well. So one of the first steps, I do if I install a new version of my distribution, is to place the "unload module and reload with the right value" code to my "rc.local" file. Is there any chance to get this card added to the kernel, so the right value gets auto-loaded? Thanks in advance Yours Manuel Reimer