The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: "Ramuthevar, Vadivel MuruganX"  <vadivel.muruganx.ramuthevar@linux.intel.com>
To: Rob Herring <robh@kernel.org>
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	kishon@ti.com, andriy.shevchenko@intel.com,
	cheol.yong.kim@intel.com, qi-ming.wu@intel.com,
	peter.harliman.liem@intel.com
Subject: Re: [PATCH v8 1/2] dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM eMMC PHY
Date: Mon, 16 Dec 2019 11:23:01 +0800	[thread overview]
Message-ID: <fc4a2812-56d8-3008-151a-d143993da803@linux.intel.com> (raw)
In-Reply-To: <20191213190819.GA19560@bogus>

Hi,

    Thank you for the review comments.

On 14/12/2019 3:08 AM, Rob Herring wrote:
> On Thu, Dec 12, 2019 at 09:53:19AM +0800, Ramuthevar,Vadivel MuruganX wrote:
>> From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>>
>> Add a YAML schema to use the host controller driver with the
>> eMMC PHY on Intel's Lightning Mountain SoC.
>>
>> Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>> ---
>>   .../bindings/phy/intel,lgm-emmc-phy.yaml           | 62 ++++++++++++++++++++++
>>   1 file changed, 62 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
>> new file mode 100644
>> index 000000000000..aed11258d96d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
>> @@ -0,0 +1,62 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/phy/intel,lgm-emmc-phy.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Intel Lightning Mountain(LGM) eMMC PHY Device Tree Bindings
>> +
>> +maintainers:
>> +  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
>> +
>> +description: |+
>> +  Bindings for eMMC PHY on Intel's Lightning Mountain SoC, syscon
>> +  node is used to reference the base address of eMMC phy registers.
>> +
>> +  The eMMC PHY node should be the child of a syscon node with the
>> +  required property:
>> +
>> +  - compatible:         Should be one of the following:
>> +                        "intel,lgm-syscon", "syscon"
>> +  - reg:
>> +      maxItems: 1
>> +
>> +properties:
>> +  compatible:
>> +    contains:
> You need to drop 'contains'. That implies other strings can also be
> present.
Sure, I will drop contains..
>> +      const: intel,lgm-emmc-phy
>> +
>> +  "#phy-cells":
>> +    const: 0
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  clock-names:
>> +    maxItems: 1
> Drop maxItems. It should be:
>
> const: emmcclk
>
> Or just drop clock-names because you don't really need *-names when
> there is only 1.

Noted, fix it.

With Best Regards
Vadivel
>> +
>> +required:
>> +  - "#phy-cells"
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +
>> +examples:
>> +  - |
>> +    sysconf: chiptop@e0200000 {
>> +      compatible = "intel,lgm-syscon", "syscon";
>> +      reg = <0xe0200000 0x100>;
>> +
>> +      emmc-phy: emmc-phy@a8 {
>> +        compatible = "intel,lgm-emmc-phy";
>> +        reg = <0x00a8 0x10>;
>> +        clocks = <&emmc>;
>> +        clock-names = "emmcclk";
>> +        #phy-cells = <0>;
>> +      };
>> +    };
>> +...
>> -- 
>> 2.11.0
>>

  reply	other threads:[~2019-12-16  3:23 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-12  1:53 [PATCH v8 0/2] phy: intel-lgm-emmc: Add support for eMMC PHY Ramuthevar,Vadivel MuruganX
2019-12-12  1:53 ` [PATCH v8 1/2] dt-bindings: phy: intel-emmc-phy: Add YAML schema for LGM " Ramuthevar,Vadivel MuruganX
2019-12-13 19:08   ` Rob Herring
2019-12-16  3:23     ` Ramuthevar, Vadivel MuruganX [this message]
2019-12-12  1:53 ` [PATCH v8 2/2] phy: intel-lgm-emmc: Add support for " Ramuthevar,Vadivel MuruganX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fc4a2812-56d8-3008-151a-d143993da803@linux.intel.com \
    --to=vadivel.muruganx.ramuthevar@linux.intel.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=cheol.yong.kim@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peter.harliman.liem@intel.com \
    --cc=qi-ming.wu@intel.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox