Re: [RFC PATCH 04/10] net: ti: prueth: Adds link detection, RX and TX support.

[Andrew Lunn <andrew@lunn.ch>]

> +/* update phy/port status information for firmware */
> +static void icssm_emac_update_phystatus(struct prueth_emac *emac)
> +{
> +	struct prueth *prueth = emac->prueth;
> +	u32 phy_speed, port_status = 0;
> +	enum prueth_mem region;
> +	u32 delay;
> +
> +	region = emac->dram;
> +	phy_speed = emac->speed;
> +	icssm_prueth_write_reg(prueth, region, PHY_SPEED_OFFSET, phy_speed);
> +
> +	if (phy_speed == SPEED_10)
> +		delay = TX_CLK_DELAY_10M;

How can speed to 10? You removed those link modes?

> +/**
> + * icssm_emac_ndo_start_xmit - EMAC Transmit function
> + * @skb: SKB pointer
> + * @ndev: EMAC network adapter
> + *
> + * Called by the system to transmit a packet  - we queue the packet in
> + * EMAC hardware transmit queue
> + *
> + * Return: success(NETDEV_TX_OK) or error code (typically out of desc's)
> + */
> +static int icssm_emac_ndo_start_xmit(struct sk_buff *skb,
> +				     struct net_device *ndev)
> +{
> +	struct prueth_emac *emac = netdev_priv(ndev);
> +	int ret = 0;
> +	u16 qid;
> +
> +	if (unlikely(!emac->link)) {
> +		if (netif_msg_tx_err(emac) && net_ratelimit())
> +			netdev_err(ndev, "No link to transmit");
> +		goto fail_tx;
> +	}

Do many other MAC drivers have this test?

> --- a/drivers/net/ethernet/ti/icssm/icssm_prueth.h
> +++ b/drivers/net/ethernet/ti/icssm/icssm_prueth.h
> @@ -17,6 +17,11 @@
>  
>  /* PRUSS local memory map */
>  #define ICSS_LOCAL_SHARED_RAM	0x00010000
> +#define EMAC_MAX_PKTLEN		(ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN)
> +/* Below macro is for 1528 Byte Frame support, to Allow even with
> + * Redundancy tag
> + */
> +#define EMAC_MAX_FRM_SUPPORT (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN + 6)

This looks familiar....

	Andrew