public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Louis Chauvet <louis.chauvet@bootlin.com>
To: Luca Ceresoli <luca.ceresoli@bootlin.com>,
	Andrzej Hajda <andrzej.hajda@intel.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Robert Foss <rfoss@kernel.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Marek Vasut <marex@denx.de>, Linus Walleij <linusw@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
	stable@vger.kernel.org
Subject: Re: [PATCH 2/3] drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output
Date: Wed, 8 Apr 2026 17:34:01 +0200	[thread overview]
Message-ID: <fdfc2321-bc31-4ff8-831e-adefcf6689a8@bootlin.com> (raw)
In-Reply-To: <20260226-ti-sn65dsi83-dual-lvds-fixes-and-test-pattern-v1-2-2e15f5a9a6a0@bootlin.com>



On 2/26/26 17:16, Luca Ceresoli wrote:
> Dual LVDS output (available on the SN65DSI84) requires HSYNC_PULSE_WIDTH
> and HORIZONTAL_BACK_PORCH to be divided by two with respect to the values
> used for single LVDS output.
> 
> While not clearly stated in the datasheet, this is needed according to the
> DSI Tuner [0] output. It also makes sense intuitively because in dual LVDS
> output two pixels at a time are output and so the output clock is half of
> the pixel clock.
> 
> Some dual-LVDS panels refuse to show any picture without this fix.
> 
> Divide by two HORIZONTAL_FRONT_PORCH too, even though this register is used
> only for test pattern generation which is not currently implemented by this
> driver.
> 
> [0] https://www.ti.com/tool/DSI-TUNER
> 
> Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>

> ---
>   drivers/gpu/drm/bridge/ti-sn65dsi83.c | 7 ++++---
>   1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> index d2a81175d279..17a885244e1e 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> @@ -517,6 +517,7 @@ static void sn65dsi83_atomic_pre_enable(struct drm_bridge *bridge,
>   					struct drm_atomic_state *state)
>   {
>   	struct sn65dsi83 *ctx = bridge_to_sn65dsi83(bridge);
> +	const unsigned int dual_factor = ctx->lvds_dual_link ? 2 : 1;
>   	const struct drm_bridge_state *bridge_state;
>   	const struct drm_crtc_state *crtc_state;
>   	const struct drm_display_mode *mode;
> @@ -653,18 +654,18 @@ static void sn65dsi83_atomic_pre_enable(struct drm_bridge *bridge,
>   	/* 32 + 1 pixel clock to ensure proper operation */
>   	le16val = cpu_to_le16(32 + 1);
>   	regmap_bulk_write(ctx->regmap, REG_VID_CHA_SYNC_DELAY_LOW, &le16val, 2);
> -	le16val = cpu_to_le16(mode->hsync_end - mode->hsync_start);
> +	le16val = cpu_to_le16((mode->hsync_end - mode->hsync_start) / dual_factor);
>   	regmap_bulk_write(ctx->regmap, REG_VID_CHA_HSYNC_PULSE_WIDTH_LOW,
>   			  &le16val, 2);
>   	le16val = cpu_to_le16(mode->vsync_end - mode->vsync_start);
>   	regmap_bulk_write(ctx->regmap, REG_VID_CHA_VSYNC_PULSE_WIDTH_LOW,
>   			  &le16val, 2);
>   	regmap_write(ctx->regmap, REG_VID_CHA_HORIZONTAL_BACK_PORCH,
> -		     mode->htotal - mode->hsync_end);
> +		     (mode->htotal - mode->hsync_end) / dual_factor);
>   	regmap_write(ctx->regmap, REG_VID_CHA_VERTICAL_BACK_PORCH,
>   		     mode->vtotal - mode->vsync_end);
>   	regmap_write(ctx->regmap, REG_VID_CHA_HORIZONTAL_FRONT_PORCH,
> -		     mode->hsync_start - mode->hdisplay);
> +		     (mode->hsync_start - mode->hdisplay) / dual_factor);
>   	regmap_write(ctx->regmap, REG_VID_CHA_VERTICAL_FRONT_PORCH,
>   		     mode->vsync_start - mode->vdisplay);
>   	regmap_write(ctx->regmap, REG_VID_CHA_TEST_PATTERN, 0x00);
> 


  parent reply	other threads:[~2026-04-08 15:33 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-26 16:16 [PATCH 0/3] drm/bridge: ti-sn65dsi83: two fixes + add test pattern Luca Ceresoli
2026-02-26 16:16 ` [PATCH 1/3] drm/bridge: ti-sn65dsi83: fix CHA_DSI_CLK_RANGE rounding Luca Ceresoli
2026-02-27 10:39   ` Marek Vasut
2026-04-08 15:32   ` Louis Chauvet
2026-02-26 16:16 ` [PATCH 2/3] drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output Luca Ceresoli
2026-02-27 10:41   ` Marek Vasut
2026-04-08 15:34   ` Louis Chauvet [this message]
2026-02-26 16:16 ` [PATCH 3/3] drm/bridge: ti-sn65dsi83: add test pattern generation support Luca Ceresoli
2026-02-27 10:41   ` Marek Vasut
2026-02-27 10:57     ` Maxime Ripard
2026-02-27 12:58       ` Luca Ceresoli
2026-02-27 12:57   ` Luca Ceresoli
2026-04-08 15:40   ` Louis Chauvet
2026-04-08 16:13     ` Luca Ceresoli
2026-03-09 22:11 ` (subset) [PATCH 0/3] drm/bridge: ti-sn65dsi83: two fixes + add test pattern Luca Ceresoli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fdfc2321-bc31-4ff8-831e-adefcf6689a8@bootlin.com \
    --to=louis.chauvet@bootlin.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@gmail.com \
    --cc=andrzej.hajda@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=frieder.schrempf@kontron.de \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=linusw@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luca.ceresoli@bootlin.com \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=marex@denx.de \
    --cc=mripard@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=rfoss@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=stable@vger.kernel.org \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox