From: Su Yue <l@damenly.org>
To: Yu Kuai <yukuai@fnnas.com>
Cc: song@kernel.org, linan122@huawei.com, xni@redhat.com,
colyli@fnnas.com, linux-raid@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/5] md: add fallback to correct bitmap_ops on version mismatch
Date: Tue, 17 Feb 2026 16:54:24 +0800 [thread overview]
Message-ID: <h5rf7nsv.fsf@damenly.org> (raw)
In-Reply-To: <20260214061013.2335604-4-yukuai@fnnas.com> (Yu Kuai's message of "Sat, 14 Feb 2026 14:10:11 +0800")
On Sat 14 Feb 2026 at 14:10, Yu Kuai <yukuai@fnnas.com> wrote:
> If default bitmap version and on-disk version doesn't match, and
> mdadm
> is not the latest version to set bitmap_type, set bitmap_ops
> based on
> the disk version.
>
Why not just let old version mdadm fails since llbitmap is a new
feature.
> Signed-off-by: Yu Kuai <yukuai@fnnas.com>
> ---
> drivers/md/md.c | 103
> +++++++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 102 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/md/md.c b/drivers/md/md.c
> index 59cd303548de..d2607ed5c2e9 100644
> --- a/drivers/md/md.c
> +++ b/drivers/md/md.c
> @@ -6447,15 +6447,116 @@ static void md_safemode_timeout(struct
> timer_list *t)
>
> static int start_dirty_degraded;
>
> +/*
> + * Read bitmap superblock and return the bitmap_id based on
> disk version.
> + * This is used as fallback when default bitmap version and
> on-disk version
> + * doesn't match, and mdadm is not the latest version to set
> bitmap_type.
> + */
> +static enum md_submodule_id md_bitmap_get_id_from_sb(struct
> mddev *mddev)
> +{
> + struct md_rdev *rdev;
> + struct page *sb_page;
> + bitmap_super_t *sb;
> + enum md_submodule_id id = ID_BITMAP_NONE;
> + sector_t sector;
> + u32 version;
> +
> + if (!mddev->bitmap_info.offset)
> + return ID_BITMAP_NONE;
> +
> + sb_page = alloc_page(GFP_KERNEL);
> + if (!sb_page)
> + return ID_BITMAP_NONE;
> +
>
Personally I don't like the way treating error as ID_BITMAP_NONE.
When wrong things happen everything looks fine, no error code, no
error message.
> + sector = mddev->bitmap_info.offset;
> +
> + rdev_for_each(rdev, mddev) {
> + u32 iosize;
> +
> + if (!test_bit(In_sync, &rdev->flags) ||
> + test_bit(Faulty, &rdev->flags) ||
> + test_bit(Bitmap_sync, &rdev->flags))
> + continue;
> +
> + iosize = roundup(sizeof(bitmap_super_t),
> + bdev_logical_block_size(rdev->bdev));
> + if (sync_page_io(rdev, sector, iosize, sb_page,
> REQ_OP_READ,
> + true))
> + goto read_ok;
> + }
>
And here.
> + goto out;
> +
> +read_ok:
> + sb = kmap_local_page(sb_page);
> + if (sb->magic != cpu_to_le32(BITMAP_MAGIC))
> + goto out_unmap;
> +
> + version = le32_to_cpu(sb->version);
> + switch (version) {
> + case BITMAP_MAJOR_LO:
> + case BITMAP_MAJOR_HI:
> + case BITMAP_MAJOR_CLUSTERED:
>
For BITMAP_MAJOR_CLUSTERED, why not ID_CLUSTER ?
--
Su
> + id = ID_BITMAP;
> + break;
> + case BITMAP_MAJOR_LOCKLESS:
> + id = ID_LLBITMAP;
> + break;
> + default:
> + pr_warn("md: %s: unknown bitmap version %u\n",
> + mdname(mddev), version);
> + break;
> + }
> +
> +out_unmap:
> + kunmap_local(sb);
> +out:
> + __free_page(sb_page);
> + return id;
> +}
> +
> static int md_bitmap_create(struct mddev *mddev)
> {
> + enum md_submodule_id orig_id = mddev->bitmap_id;
> + enum md_submodule_id sb_id;
> + int err;
> +
> if (mddev->bitmap_id == ID_BITMAP_NONE)
> return -EINVAL;
>
> if (!mddev_set_bitmap_ops(mddev))
> return -ENOENT;
>
> - return mddev->bitmap_ops->create(mddev);
> + err = mddev->bitmap_ops->create(mddev);
> + if (!err)
> + return 0;
>
> +
> + /*
> + * Create failed, if default bitmap version and on-disk
> version
> + * doesn't match, and mdadm is not the latest version to set
> + * bitmap_type, set bitmap_ops based on the disk version.
> + */
> + mddev_clear_bitmap_ops(mddev);
> +
> + sb_id = md_bitmap_get_id_from_sb(mddev);
> + if (sb_id == ID_BITMAP_NONE || sb_id == orig_id)
> + return err;
> +
> + pr_info("md: %s: bitmap version mismatch, switching from %d to
> %d\n",
> + mdname(mddev), orig_id, sb_id);
> +
> + mddev->bitmap_id = sb_id;
> + if (!mddev_set_bitmap_ops(mddev)) {
> + mddev->bitmap_id = orig_id;
> + return -ENOENT;
> + }
> +
> + err = mddev->bitmap_ops->create(mddev);
> + if (err) {
> + mddev_clear_bitmap_ops(mddev);
> + mddev->bitmap_id = orig_id;
> + }
> +
> + return err;
> }
>
> static void md_bitmap_destroy(struct mddev *mddev)
next prev parent reply other threads:[~2026-02-17 8:59 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-14 6:10 [PATCH 0/5] md/md-llbitmap: fixes and proactive parity building support Yu Kuai
2026-02-14 6:10 ` [PATCH 1/5] md/md-llbitmap: skip reading rdevs that are not in_sync Yu Kuai
2026-02-14 6:10 ` [PATCH 2/5] md/md-llbitmap: raise barrier before state machine transition Yu Kuai
2026-02-14 6:10 ` [PATCH 3/5] md: add fallback to correct bitmap_ops on version mismatch Yu Kuai
2026-02-17 8:54 ` Su Yue [this message]
2026-02-23 2:22 ` Yu Kuai
2026-02-24 1:52 ` Su Yue
2026-03-10 1:15 ` Xiao Ni
2026-03-10 5:19 ` Su Yue
2026-02-14 6:10 ` [PATCH 4/5] md/md-llbitmap: add CleanUnwritten state for RAID-5 proactive parity building Yu Kuai
2026-02-14 6:10 ` [PATCH 5/5] md/md-llbitmap: optimize initial sync with write_zeroes_unmap support Yu Kuai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=h5rf7nsv.fsf@damenly.org \
--to=l@damenly.org \
--cc=colyli@fnnas.com \
--cc=linan122@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=song@kernel.org \
--cc=xni@redhat.com \
--cc=yukuai@fnnas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox