From: ebiederm@xmission.com (Eric W. Biederman)
To: Robert Hancock <hancockrwd@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>,
Jesse Barnes <jbarnes@virtuousgeek.org>,
Andrew Morton <akpm@linux-foundation.org>,
david@lang.hm, Matthew Wilcox <matthew@wil.cx>,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-scsi@vger.kernel.org, DL-MPTFusionLinux@lsi.com,
linux-pci@vger.kernel.org
Subject: Re: [PATCH] pci: enable MSI on 8132
Date: Fri, 20 Feb 2009 23:50:31 -0800 [thread overview]
Message-ID: <m1fxi82pq0.fsf@fess.ebiederm.org> (raw)
In-Reply-To: <499CD466.1060900@gmail.com> (Robert Hancock's message of "Wed\, 18 Feb 2009 21\:39\:18 -0600")
Robert Hancock <hancockrwd@gmail.com> writes:
>
> Is there a reason why we can't just enable the HT MSI mapping for any bridge
> device that has that PCI capability and is underneath an HT bridge?
The code should be under CONFIG_X86 because the rules for enabling HT MSI mappings
are different for other architectures. But otherwise I can't think of a reason.
> Essentially
> the code for nv_msi_ht_cap_quirk could potentially be applied to all bridges as
> it is currently for NVIDIA and ALi bridges..
Sounds like it would save a fair amount of grief.
Eric
next prev parent reply other threads:[~2009-02-21 7:50 UTC|newest]
Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-17 22:24 mpt fusion broken sometime since 2.6.24 david
2009-02-17 21:44 ` david
2009-02-17 23:00 ` Matthew Wilcox
2009-02-17 23:07 ` david
2009-02-17 23:11 ` Matthew Wilcox
2009-02-17 23:20 ` Yinghai Lu
2009-02-17 23:21 ` david
2009-02-17 23:11 ` Yinghai Lu
2009-02-17 23:20 ` david
2009-02-17 23:22 ` Yinghai Lu
2009-02-17 23:37 ` david
2009-02-18 2:01 ` Yinghai Lu
2009-02-18 2:03 ` david
2009-02-18 2:14 ` Yinghai Lu
2009-02-18 2:32 ` david
2009-02-18 2:28 ` Yinghai Lu
2009-02-18 2:34 ` david
2009-02-18 2:40 ` david
2009-02-18 2:49 ` Yinghai Lu
2009-02-18 3:26 ` david
2009-02-18 3:28 ` Yinghai Lu
2009-02-18 3:35 ` david
2009-02-18 3:45 ` david
2009-02-18 3:47 ` Yinghai Lu
2009-02-18 4:14 ` david
2009-02-18 4:36 ` Yinghai Lu
2009-02-18 5:06 ` Yinghai Lu
2009-02-18 5:10 ` Yinghai Lu
2009-02-18 4:40 ` [PATCH] pci: enable MSI on 8132 Yinghai Lu
2009-02-18 12:21 ` Matthew Wilcox
2009-02-18 12:27 ` david
2009-02-18 18:04 ` Andrew Morton
2009-02-18 18:18 ` david
2009-02-18 18:32 ` Greg KH
2009-02-18 18:38 ` James Bottomley
2009-02-18 18:40 ` david
2009-02-18 19:08 ` Yinghai Lu
2009-02-18 19:14 ` James Bottomley
2009-02-18 19:25 ` Yinghai Lu
2009-02-18 20:12 ` Jeff Garzik
2009-02-18 20:18 ` James Bottomley
2009-02-18 19:15 ` Andrew Morton
2009-02-18 19:29 ` Yinghai Lu
2009-02-18 19:33 ` James Bottomley
2009-02-19 4:21 ` Prakash, Sathya
2009-02-18 19:00 ` Jesse Barnes
2009-02-19 3:39 ` Robert Hancock
2009-02-21 7:50 ` Eric W. Biederman [this message]
2009-02-21 8:31 ` Yinghai Lu
2009-02-21 8:58 ` Eric W. Biederman
2009-02-21 10:23 ` Yinghai Lu
2009-02-21 18:59 ` Robert Hancock
2009-02-22 12:08 ` Prakash Punnoor
2009-02-22 12:54 ` Eric W. Biederman
2009-02-22 15:17 ` Prakash Punnoor
2009-02-22 21:45 ` Yinghai Lu
2009-02-22 22:07 ` Yinghai Lu
2009-02-23 6:18 ` Yinghai Lu
2009-02-23 18:21 ` Prakash Punnoor
2009-02-23 18:50 ` Yinghai Lu
2009-02-23 19:01 ` Prakash Punnoor
2009-02-23 19:51 ` [PATCH] pci: don't enable too many HT MSI mapping Yinghai Lu
2009-02-24 17:37 ` Jesse Barnes
2009-02-27 6:52 ` Prakash Punnoor
2009-02-27 20:59 ` Yinghai Lu
2009-02-28 8:25 ` Prakash Punnoor
2009-02-28 20:57 ` Yinghai Lu
2009-02-28 22:43 ` Yinghai Lu
2009-03-01 7:50 ` Prakash Punnoor
2009-03-01 7:58 ` Prakash Punnoor
2009-03-01 8:12 ` Yinghai Lu
2009-03-01 8:29 ` Prakash Punnoor
2009-03-04 7:15 ` Prakash Punnoor
2009-03-04 8:21 ` Yinghai Lu
2009-03-05 17:01 ` Matthew Wilcox
2009-03-05 17:15 ` Matthew Wilcox
2009-03-05 23:26 ` Yinghai Lu
2009-03-05 23:45 ` Prakash Punnoor
2009-03-06 1:10 ` Matthew Wilcox
2009-03-06 4:15 ` Yinghai Lu
2009-03-06 9:10 ` Prakash Punnoor
2009-03-21 2:29 ` [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend Yinghai Lu
2009-03-26 23:10 ` Jesse Barnes
2009-03-28 12:34 ` Prakash Punnoor
2009-03-28 13:31 ` Prakash Punnoor
2009-03-28 20:18 ` Yinghai Lu
2009-03-28 22:11 ` Prakash Punnoor
2009-03-28 20:52 ` Yinghai Lu
2009-03-28 22:16 ` Prakash Punnoor
2009-03-28 23:15 ` Yinghai Lu
2009-03-29 1:33 ` Yinghai Lu
2009-03-29 9:15 ` Prakash Punnoor
2009-03-29 9:32 ` Yinghai Lu
2009-03-29 12:50 ` Prakash Punnoor
2009-03-29 19:27 ` Yinghai Lu
2009-03-29 19:30 ` [PATCH] pci: don't enable too much HT MSI mapping -v6 Yinghai Lu
2009-03-30 19:17 ` Jesse Barnes
2009-02-22 23:42 ` [PATCH] pci: enable MSI on 8132 Matthew Wilcox
2009-02-22 3:42 ` Grant Grundler
2009-02-18 3:12 ` mpt fusion broken sometime since 2.6.24 david
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m1fxi82pq0.fsf@fess.ebiederm.org \
--to=ebiederm@xmission.com \
--cc=DL-MPTFusionLinux@lsi.com \
--cc=akpm@linux-foundation.org \
--cc=david@lang.hm \
--cc=hancockrwd@gmail.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=matthew@wil.cx \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox