From: ebiederm@xmission.com (Eric W. Biederman)
To: Greg KH <gregkh@suse.de>
Cc: linux-kernel@vger.kernel.org, stable@kernel.org,
stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk
Subject: Re: [000/136] 2.6.31.2-stable review
Date: Thu, 01 Oct 2009 22:01:34 -0700 [thread overview]
Message-ID: <m1tyyixuc1.fsf@fess.ebiederm.org> (raw)
In-Reply-To: <20091002012911.GA18542@kroah.com> (Greg KH's message of "Thu\, 1 Oct 2009 18\:29\:11 -0700")
Greg KH <gregkh@suse.de> writes:
> Note from the -stable maintainer on this release:
>
> This release is big. Yeah, really big. There are a number of
> areas that needed some rework in order to get things back to
> working order. Like the tty layer. Hopefully everyone can now
> use their usb to serial devices again without oopsing the
> kernel
The ftdi_sio driver still crashes and burns.
CPU 0:
Modules linked in: nfsd lockd nfs_acl auth_rpcgss exportfs sco bridge stp bnep l2cap bluetooth sunrpc ipv6 cpufreq_ondemand powernow_k8 freq_table dm_mirror dm_region_hash dm_log dm_multipath dm_mod uinput kvm_amd kvm fuse xt_multiport iptable_nat ip_tables nf_nat x_tables nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 tun 8021q snd_hda_codec_realtek k8temp amd64_edac_mod snd_hda_intel snd_hda_codec snd_hwdep ftdi_sio firewire_ohci edac_core hwmon e1000e sata_sil24 snd_pcm snd_timer firewire_core usbserial forcedeth pata_amd crc_itu_t snd soundcore pcspkr snd_page_alloc i2c_nforce2 i2c_core sg ata_generic pata_acpi sata_nv libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan]
Pid: 0, comm: swapper Not tainted 2.6.31.2-rc1 #7
RIP: 0010:[<ffffffff8102c840>] [<ffffffff8102c840>] native_safe_halt+0x6/0x8
RSP: 0018:ffffffff81545e48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffffffff81545e48 RCX: 0000000003000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffff81545e58
RBP: ffffffff8100c7ce R08: 0000000000000000 R09: 0000000000080e80
R10: 0000000000000000 R11: 000000000000000e R12: ffffffff810737df
R13: ffffffff81545dd8 R14: ffffffff8105c697 R15: ffffffff81545e38
FS: 00007fe3e0df5910(0000) GS:ffff8800017bd000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000001d9c000 CR3: 000000003b8e6000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
[<ffffffff81014126>] ? default_idle+0x51/0x8b
[<ffffffff81014265>] ? c1e_idle+0x105/0x120
[<ffffffff8100ae15>] ? cpu_idle+0xb0/0xf3
[<ffffffff81392185>] ? rest_init+0x79/0x8f
[<ffffffff815ccfae>] ? start_kernel+0x3dc/0x3fd
[<ffffffff815cc2d4>] ? x86_64_start_reservations+0xbb/0xd6
[<ffffffff815cc3f4>] ? x86_64_start_kernel+0x105/0x128
bad: scheduling from the idle thread!
Pid: 0, comm: swapper Not tainted 2.6.31.2-rc1 #7
Call Trace:
<IRQ> [<ffffffff81041021>] dequeue_task_idle+0x37/0x5a
[<ffffffff810407e3>] dequeue_task+0xce/0xf0
[<ffffffff8104083c>] deactivate_task+0x37/0x56
[<ffffffff813a4fc7>] schedule+0x13d/0x6f3
[<ffffffff81042942>] ? enqueue_task_fair+0xdf/0x13c
[<ffffffff810700a2>] ? sched_clock_cpu+0x162/0x17f
[<ffffffff813a5e97>] __mutex_lock_common+0x12f/0x1aa
[<ffffffff813a5f39>] __mutex_lock_slowpath+0x27/0x3d
[<ffffffff813a5c4d>] mutex_lock+0x25/0x53
[<ffffffff81253f55>] tty_unthrottle+0x29/0x6d
[<ffffffff812528e6>] reset_buffer_flags+0xe8/0x105
[<ffffffff81252927>] n_tty_flush_buffer+0x24/0x97
[<ffffffff812535d7>] n_tty_receive_buf+0xc3d/0xe72
[<ffffffff8129b8b1>] ? usb_submit_urb+0x30d/0x33f
[<ffffffff8129b151>] ? usb_hcd_submit_urb+0x888/0x943
[<ffffffff81254ddf>] ? tty_ldisc_try+0x53/0x71
[<ffffffff81255ee1>] flush_to_ldisc+0x116/0x1bd
[<ffffffff81255fe6>] tty_flip_buffer_push+0x5e/0x85
[<ffffffffa01ff0ab>] ftdi_process_read+0x481/0x627 [ftdi_sio]
[<ffffffffa0000fa3>] ? ehci_qtd_free+0x27/0x3d [ehci_hcd]
[<ffffffffa01ff480>] ftdi_read_bulk_callback+0x22f/0x25a [ftdi_sio]
[<ffffffff81040c49>] ? complete+0x54/0x73
[<ffffffffa00db214>] ? nv_host_intr+0x2f/0x87 [sata_nv]
[<ffffffff81299a86>] usb_hcd_giveback_urb+0x9b/0xe5
[<ffffffffa00010f9>] ehci_urb_done+0x91/0xbc [ehci_hcd]
[<ffffffffa00027f3>] qh_completions+0x42a/0x4ca [ehci_hcd]
[<ffffffffa0002938>] ehci_work+0xa5/0x7ab [ehci_hcd]
[<ffffffffa00db90f>] ? nv_swncq_interrupt+0x6a3/0x6d1 [sata_nv]
[<ffffffff81073401>] ? clocksource_read+0x1d/0x33
[<ffffffffa000597f>] ehci_irq+0x351/0x391 [ehci_hcd]
[<ffffffff81056273>] ? irq_exit+0x5f/0xa3
[<ffffffff81073401>] ? clocksource_read+0x1d/0x33
[<ffffffff810737df>] ? getnstimeofday+0x69/0xd3
[<ffffffff81299390>] usb_hcd_irq+0x4d/0xa1
[<ffffffff810a2313>] handle_IRQ_event+0x6a/0x13f
[<ffffffff810a43d3>] handle_fasteoi_irq+0x90/0xe1
[<ffffffff8100eb5a>] handle_irq+0x95/0xb7
[<ffffffff8100df49>] do_IRQ+0x6a/0xe0
[<ffffffff8100c7d3>] ret_from_intr+0x0/0x11
<EOI> [<ffffffff8102c840>] ? native_safe_halt+0x6/0x8
[<ffffffff81014126>] ? default_idle+0x51/0x8b
[<ffffffff81014265>] ? c1e_idle+0x105/0x120
[<ffffffff8100ae15>] ? cpu_idle+0xb0/0xf3
[<ffffffff81392185>] ? rest_init+0x79/0x8f
[<ffffffff815ccfae>] ? start_kernel+0x3dc/0x3fd
[<ffffffff815cc2d4>] ? x86_64_start_reservations+0xbb/0xd6
[<ffffffff815cc3f4>] ? x86_64_start_kernel+0x105/0x128
BUG: scheduling while atomic: swapper/0/0x00010000
Eric
next prev parent reply other threads:[~2009-10-02 5:01 UTC|newest]
Thread overview: 155+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20091002011548.335611824@mini.kroah.org>
2009-10-02 1:29 ` [000/136] 2.6.31.2-stable review Greg KH
2009-10-02 1:15 ` [001/136] KVM: VMX: Fix EPT with WP bit change during paging Greg KH
2009-10-02 1:15 ` [002/136] pata_amd: do not filter out valid modes in nv_mode_filter Greg KH
2009-10-02 1:15 ` [003/136] p54usb: add Zcomax XG-705A usbid Greg KH
2009-10-02 1:15 ` [004/136] x86: Increase MIN_GAP to include randomized stack Greg KH
2009-10-02 1:15 ` [005/136] serial: bfin_5xx: fix building as module when early printk is enabled Greg KH
2009-10-02 1:15 ` [006/136] USB: option.c Add support for ZTE AC2726 EVDO modem Greg KH
2009-10-02 1:15 ` [007/136] USB: option: TELIT UC864G support Greg KH
2009-10-02 1:15 ` [008/136] video: s3c_fb.c: fix build with CONFIG_HOTPLUG=n Greg KH
2009-10-02 1:15 ` [009/136] kbuild: fix cc1 options check to ensure we do not use -fPIC when compiling Greg KH
2009-10-02 1:15 ` [010/136] drivers/mfd/ab3100-core.c: fix powerpc build error Greg KH
2009-10-02 1:15 ` [011/136] thinkpad-acpi: dont ask about brightness_mode for fw. 1V and 1R Greg KH
2009-10-02 1:16 ` [012/136] ACPI: pci_slot.ko wants a 64-bit _SUN Greg KH
2009-10-02 1:16 ` [013/136] fbcon: only unbind from console if successfully registered Greg KH
2009-10-02 1:16 ` [014/136] kallsyms: fix segfault in prefix_underscores_count() Greg KH
2009-10-02 1:16 ` [015/136] sisfb: change SiS_DDC_Port type to SISIOADDRESS Greg KH
2009-10-02 1:16 ` [016/136] mmc_spi: fail gracefully if host or card do not support the switch command Greg KH
2009-10-02 1:16 ` [017/136] alpha: AGP update (fixes compile failure) Greg KH
2009-10-02 1:16 ` [018/136] fs: make sure data stored into inode is properly seen before unlocking new inode Greg KH
2009-10-02 1:16 ` [019/136] eCryptfs: Handle unrecognized tag 3 cipher codes Greg KH
2009-10-02 1:16 ` [020/136] eCryptfs: Check for O_RDONLY lower inodes when opening lower files Greg KH
2009-10-02 1:16 ` [021/136] eCryptfs: Filename encryption only supports password auth tokens Greg KH
2009-10-02 1:16 ` [022/136] eCryptfs: Validate global auth tok keys Greg KH
2009-10-02 1:16 ` [023/136] eCryptfs: Prevent lower dentry from going negative during unlink Greg KH
2009-10-02 1:16 ` [024/136] [CIFS] Re-enable Lanman security Greg KH
2009-10-02 1:16 ` [025/136] xen: make -fstack-protector work under Xen Greg KH
2009-10-02 1:16 ` [026/136] xen: only enable interrupts while actually blocking for spinlock Greg KH
2009-10-02 1:16 ` [027/136] xen: use stronger barrier after unlocking lock Greg KH
2009-10-02 1:16 ` [028/136] xen: check EFER for NX before setting up GDT mapping Greg KH
2009-10-02 1:16 ` [029/136] perf_counter: Fix perf_copy_attr() pointer arithmetic Greg KH
2009-10-02 1:16 ` [030/136] perf tools: Fix buffer allocation Greg KH
2009-10-02 1:16 ` [031/136] tty: serial/pcmcia: add ID for Advantech card Greg KH
2009-10-02 1:16 ` [032/136] PM / PCMCIA: Drop second argument of pcmcia_socket_dev_suspend() Greg KH
2009-10-02 1:16 ` [033/136] PM / yenta: Fix cardbus suspend/resume regression Greg KH
2009-10-02 1:16 ` [034/136] sony-laptop: check for rfkill hard block at load time Greg KH
2009-10-02 1:16 ` [035/136] nilfs2: fix missing zero-fill initialization of btree node cache Greg KH
2009-10-02 1:16 ` [036/136] ar9170usb: add usbid for TP-Link TL-WN821N v2 Greg KH
2009-10-02 1:16 ` [037/136] mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver Greg KH
2009-10-02 1:16 ` [038/136] mtd: ofpart: Check availability of reg property instead of name property Greg KH
2009-10-02 1:16 ` [039/136] mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G Greg KH
2009-10-02 1:16 ` [040/136] USB: serial: ftdi_sio: new hardware support - hameg power supply Greg KH
2009-10-02 1:16 ` [041/136] USB: add PIDs for FTDI based OpenDCC hardware Greg KH
2009-10-02 1:16 ` [042/136] USB: serial: ftdi: handle gnICE+ JTAG adaptors Greg KH
2009-10-02 1:16 ` [043/136] USB: CDC WDM driver doesnt support non-blocking reads Greg KH
2009-10-02 1:16 ` [044/136] USB: fix cdc-acm regression in open Greg KH
2009-10-02 1:16 ` [045/136] cdc_acm: Fix to use modern speed interfaces Greg KH
2009-10-02 1:16 ` [046/136] tty: remove dtr/rts use from the driver open methods Greg KH
2009-10-02 1:16 ` [047/136] tty: gigaset: really fix chars_in_buffer Greg KH
2009-10-02 1:16 ` [048/136] kaweth: Fix memory leak in kaweth_control() Greg KH
2009-10-02 1:16 ` [049/136] x86: SGI UV: Fix IPI macros Greg KH
2009-10-02 1:16 ` [050/136] USB: serial: pl2303: new hardware support - sanwa multimeter Greg KH
2009-10-02 1:16 ` [051/136] USB: storage: fix a resume path GFP_NOIO must be used Greg KH
2009-10-02 1:16 ` [052/136] USB: usb-storage fails to attach to Huawei Datacard cdrom device Greg KH
2009-10-02 1:16 ` [053/136] USB: usbtmc: sanity checks for DEV_DEP_MSG_IN urbs Greg KH
2009-10-02 1:16 ` [054/136] USB: sl811-hcd: Fix device disconnect: Greg KH
2009-10-02 1:16 ` [055/136] drm/i915: remove restore in resume Greg KH
2009-10-02 1:16 ` [056/136] drm/i915: Only destroy a constructed mmap offset Greg KH
2009-10-02 1:16 ` [057/136] drm/i915: prevent FIFO calculation overflows on 32 bits with high dotclocks Greg KH
2009-10-02 1:16 ` [058/136] drm/i915: Add buffer to inactive list immediately during fault Greg KH
2009-10-02 1:16 ` [059/136] drm/i915: Check that the relocation points to within the target Greg KH
2009-10-02 1:16 ` [060/136] drm/i915: Fix typo for wrong LVDS clock setting on IGDNG Greg KH
2009-10-02 1:16 ` [061/136] drm/i915: Fix SSC frequence for IGDNG Greg KH
2009-10-02 1:16 ` [062/136] drm/i915: Remove DAC disable in CRT force detect on IGDNG Greg KH
2009-10-02 1:16 ` [063/136] drm/i915: Fix LVDS panel fitting on Arrandale Greg KH
2009-10-02 1:16 ` [064/136] drm/I915: Use the CRT DDC to get the EDID for DVI-connector on Mac Greg KH
2009-10-02 1:16 ` [065/136] drm/i915: fix tiling on IGDNG Greg KH
2009-10-02 1:16 ` [066/136] agp/intel: Fix the pre-9xx chipset flush Greg KH
2009-10-02 1:16 ` [067/136] nfsd4: fix null dereference creating nfsv4 callback client Greg KH
2009-10-02 1:16 ` [068/136] can: fix NOHZ local_softirq_pending 08 warning Greg KH
2009-10-02 1:16 ` [069/136] ahci: restore pci_intx() handling Greg KH
2009-10-02 1:16 ` [070/136] [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume Greg KH
2009-10-02 1:16 ` [071/136] net ax25: Fix signed comparison in the sockopt handler Greg KH
2009-10-02 1:17 ` [072/136] net: Make the copy length in af_packet sockopt handler unsigned Greg KH
2009-10-02 1:17 ` [073/136] pty_write: dont do a tty_wakeup() when the buffers are full Greg KH
2009-10-02 1:17 ` [074/136] KVM: fix cpuid E2BIG handling for extended request types Greg KH
2009-10-02 1:17 ` [075/136] KVM: MMU: fix missing locking in alloc_mmu_pages Greg KH
2009-10-02 1:17 ` [076/136] KVM: MMU: fix bogus alloc_mmu_pages assignment Greg KH
2009-10-02 1:17 ` [077/136] KVM: Protect update_cr8_intercept() when running without an apic Greg KH
2009-10-02 1:17 ` [078/136] Revert "KVM: x86: check for cr3 validity in ioctl_set_sregs" Greg KH
2009-10-02 1:17 ` [079/136] [CPUFREQ] Fix NULL ptr regression in powernow-k8 Greg KH
2009-10-03 15:19 ` Herton Ronaldo Krzesinski
2009-10-05 16:08 ` [Stable-review] " Greg KH
2009-10-02 1:17 ` [080/136] perf tools: do not complain if root is owning perf.data Greg KH
2009-10-02 1:17 ` [081/136] netfilter: nf_nat: fix inverted logic for persistent NAT mappings Greg KH
2009-10-02 1:17 ` [082/136] netfilter: nf_conntrack: netns fix re reliable conntrack event delivery Greg KH
2009-10-02 1:17 ` [083/136] netfilter: bridge: refcount fix Greg KH
2009-10-02 1:17 ` [084/136] netfilter: ebt_ulog: fix checkentry return value Greg KH
2009-10-02 1:17 ` [085/136] ath5k: Wakeup fixes Greg KH
2009-10-02 1:17 ` [086/136] ath5k: do not release irq across suspend/resume Greg KH
2009-10-02 1:17 ` [087/136] Driver core: add new device to buss list before probing Greg KH
2009-10-02 1:17 ` [088/136] tty: Add a full port_close function Greg KH
2009-10-02 1:17 ` [089/136] tty: USB hangup is racy Greg KH
2009-10-02 1:17 ` [090/136] tty: USB can now use the shutdown method for kref based freeing of ports Greg KH
2009-10-02 1:17 ` [091/136] hwmon: (asus_atk0110) Add maintainer information Greg KH
2009-10-02 1:17 ` [092/136] tty: USB serial termios bits Greg KH
2009-10-02 1:17 ` [093/136] usb-serial: change referencing of port and serial structures Greg KH
2009-10-02 1:17 ` [094/136] usb-serial: put subroutines in logical order Greg KH
2009-10-02 1:17 ` [095/136] usb-serial: change logic of serial lookups Greg KH
2009-10-02 1:17 ` [096/136] usb-serial: acquire references when a new tty is installed Greg KH
2009-10-02 1:17 ` [097/136] usb-serial: fix termios initialization logic Greg KH
2009-10-02 1:17 ` [098/136] usb-serial: rename subroutines Greg KH
2009-10-02 1:17 ` [099/136] usb-serial: add missing tests and debug lines Greg KH
2009-10-02 1:17 ` [100/136] usb-serial: straighten out serial_open Greg KH
2009-10-02 1:17 ` [101/136] USB serial: update the console driver Greg KH
2009-10-02 1:17 ` [102/136] USB: xhci: Work around for chain bit in link TRBs Greg KH
2009-10-02 1:17 ` [103/136] USB: xhci: Fix slot and endpoint context debugging Greg KH
2009-10-02 1:17 ` [104/136] USB: xhci: Configure endpoint code refactoring Greg KH
2009-10-02 1:17 ` [105/136] USB: xhci: Set correct max packet size for HS/FS control endpoints Greg KH
2009-10-02 1:17 ` [106/136] USB: xhci: Support full speed devices Greg KH
2009-10-02 1:17 ` [107/136] USB: xhci: Handle stalled control endpoints Greg KH
2009-10-02 1:17 ` [108/136] USB: xhci: Add quirk for Fresco Logic xHCI hardware Greg KH
2009-10-02 1:17 ` [109/136] USB: xhci: Make TRB completion code comparison readable Greg KH
2009-10-02 16:38 ` David Vrabel
2009-10-02 16:53 ` [stable] " Greg KH
2009-10-02 17:23 ` David Vrabel
2009-10-02 17:35 ` Greg KH
2009-10-02 1:17 ` [110/136] USB: xhci: Handle babbling endpoints correctly Greg KH
2009-10-02 1:17 ` [111/136] USB: xhci: Dont touch xhci_td after its freed Greg KH
2009-10-02 1:17 ` [112/136] USB: xhci: Check URBs actual transfer buffer size Greg KH
2009-10-02 1:17 ` [113/136] USB: xhci: Check URB_SHORT_NOT_OK before setting short packet status Greg KH
2009-10-02 1:17 ` [114/136] USB: xhci: Set -EREMOTEIO when xHC gives bad transfer length Greg KH
2009-10-02 1:17 ` [115/136] USB: xhci: Support interrupt transfers Greg KH
2009-10-02 1:17 ` [116/136] USB: Fix SS endpoint companion descriptor parsing Greg KH
2009-10-02 1:17 ` [117/136] /proc/kcore: work around a BUG() Greg KH
2009-10-02 1:17 ` [118/136] hugetlb: restore interleaving of bootmem huge pages (2.6.31) Greg KH
2009-10-02 1:17 ` [119/136] page-allocator: limit the number of MIGRATE_RESERVE pageblocks per zone Greg KH
2009-10-02 1:17 ` [120/136] mm: munlock use follow_page Greg KH
2009-10-02 16:46 ` Hugh Dickins
2009-10-02 16:54 ` Greg KH
2009-10-02 1:17 ` [121/136] mm: fix anonymous dirtying Greg KH
2009-10-02 16:34 ` Hugh Dickins
2009-10-02 16:55 ` Greg KH
2009-10-02 1:17 ` [122/136] mmap: avoid unnecessary anon_vma lock acquisition in vma_adjust() Greg KH
2009-10-02 16:36 ` Hugh Dickins
2009-10-02 16:54 ` Greg KH
2009-10-02 1:17 ` [123/136] Fix idle time field in /proc/uptime Greg KH
2009-10-02 1:17 ` [124/136] drm/i915: Handle ERESTARTSYS during page fault Greg KH
2009-10-02 1:17 ` [125/136] em28xx: ir-kbd-i2c init data needs a persistent object Greg KH
2009-10-02 1:17 ` [126/136] saa7134: " Greg KH
2009-10-02 1:17 ` [127/136] powerpc/8xx: Fix regression introduced by cache coherency rewrite Greg KH
2009-10-02 1:17 ` [128/136] powerpc: Fix incorrect setting of __HAVE_ARCH_PTE_SPECIAL Greg KH
2009-10-02 1:17 ` [129/136] HID: completely remove apple mightymouse from blacklist Greg KH
2009-10-02 1:17 ` [130/136] [SCSI] mptsas : PAE Kernel more than 4 GB kernel panic Greg KH
2009-10-02 1:17 ` [131/136] NOMMU: Fix MAP_PRIVATE mmap() of objects where the data can be mapped directly Greg KH
2009-10-02 1:18 ` [132/136] iwlwifi: Handle new firmware file with ucode build number in header Greg KH
2009-10-02 1:18 ` [133/136] iwlwifi: update 1000 series API version to match firmware Greg KH
2009-10-02 1:18 ` [134/136] iwlagn: modify digital SVR for 1000 Greg KH
2009-10-02 1:18 ` [135/136] iwlwifi: traverse linklist to find the valid OTP block Greg KH
2009-10-02 1:18 ` [136/136] iwlwifi: fix unloading driver while scanning Greg KH
2009-10-02 5:01 ` Eric W. Biederman [this message]
2009-10-02 5:10 ` [000/136] 2.6.31.2-stable review Greg KH
2009-10-02 5:34 ` Eric W. Biederman
2009-10-02 6:06 ` Eric W. Biederman
2009-10-06 0:12 ` Daisuke Nishimura
2009-10-09 22:30 ` [Stable-review] " Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m1tyyixuc1.fsf@fess.ebiederm.org \
--to=ebiederm@xmission.com \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox