From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: Linus Torvalds <torvalds@osdl.org>
Cc: linux kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [PATCH] H8/300 support update (3/4) - fix waring
Date: Mon, 15 Mar 2004 01:28:20 +0900 [thread overview]
Message-ID: <m2brmz1jh7.wl%ysato@users.sourceforge.jp> (raw)
- fix gcc-3.4.0 warnings
--
Yoshinori Sato
<ysato@users.sourceforge.jp>
diff -Nru -X .exclude-diff linux-2.6.4/arch/h8300/kernel/setup.c linux-2.6.4-h8300/arch/h8300/kernel/setup.c
--- linux-2.6.4/arch/h8300/kernel/setup.c 2004-01-09 15:59:09.000000000 +0900
+++ linux-2.6.4-h8300/arch/h8300/kernel/setup.c 2004-03-03 17:30:20.000000000 +0900
@@ -135,7 +135,7 @@
init_mm.brk = (unsigned long) 0;
#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
- register_console(&gdb_console);
+ register_console((struct console *)&gdb_console);
#endif
printk("\r\n\nuClinux " CPU "\n");
diff -Nru -X .exclude-diff linux-2.6.4/arch/h8300/mm/init.c linux-2.6.4-h8300/arch/h8300/mm/init.c
--- linux-2.6.4/arch/h8300/mm/init.c 2004-01-09 15:59:41.000000000 +0900
+++ linux-2.6.4-h8300/arch/h8300/mm/init.c 2004-03-14 23:33:13.000000000 +0900
@@ -156,7 +156,7 @@
/* DAVIDM look at setup memory map generically with reserved area */
unsigned long tmp;
extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
- extern unsigned char _ramend, _ramstart;
+ extern unsigned long _ramend, _ramstart;
unsigned long len = &_ramend - &_ramstart;
unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
unsigned long end_mem = memory_end; /* DAVIDM - this must not include kernel stack at top */
diff -Nru -X .exclude-diff linux-2.6.4/arch/h8300/platform/h8300h/generic/timer.c linux-2.6.4-h8300/arch/h8300/platform/h8300h/generic/timer.c
--- linux-2.6.4/arch/h8300/platform/h8300h/generic/timer.c 2004-03-14 18:17:37.000000000 +0900
+++ linux-2.6.4-h8300/arch/h8300/platform/h8300h/generic/timer.c 2004-03-14 23:33:13.000000000 +0900
@@ -31,7 +31,7 @@
#include <asm/regs306x.h>
#define CMFA 6
-int platform_timer_setup(void (*timer_int)(int, void *, struct pt_regs *))
+int platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *))
{
ctrl_outb(H8300_TIMER_COUNT_DATA,TCORA2);
ctrl_outb(0x00,_8TCSR2);
@@ -62,7 +62,7 @@
#define GRA 0x00ffff6a
#define GRB 0x00ffff6c
-int platform_timer_setup(void (*timer_int)(int, void *, struct pt_regs *))
+int platform_timer_setup(irqreturn_t (*timer_int)(int, void *, struct pt_regs *))
{
*(unsigned short *)GRA= H8300_TIMER_COUNT_DATA;
*(unsigned short *)TCNT=0;
diff -Nru -X .exclude-diff linux-2.6.4/include/asm-h8300/bitops.h linux-2.6.4-h8300/include/asm-h8300/bitops.h
--- linux-2.6.4/include/asm-h8300/bitops.h 2004-02-20 01:08:06.000000000 +0900
+++ linux-2.6.4-h8300/include/asm-h8300/bitops.h 2004-03-14 23:33:13.000000000 +0900
@@ -89,21 +89,21 @@
case BIT: \
__asm__("stc ccr,%w1\n\t" \
"orc #0x80,ccr\n\t" \
- "bld #" #BIT ",@%3\n\t" \
- OP " #" #BIT ",@%3\n\t" \
+ "bld #" #BIT ",@%4\n\t" \
+ OP " #" #BIT ",@%4\n\t" \
"rotxl.l %0\n\t" \
"ldc %w1,ccr" \
- : "=r"(retval),"=&r"(ccrsave) \
+ : "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr) \
: "0" (retval),"r" (b_addr) \
: "memory"); \
break;
#define H8300_GEN_TEST_BITOP_CONST(OP,BIT) \
case BIT: \
- __asm__("bld #" #BIT ",@%2\n\t" \
- OP " #" #BIT ",@%2\n\t" \
+ __asm__("bld #" #BIT ",@%3\n\t" \
+ OP " #" #BIT ",@%3\n\t" \
"rotxl.l %0\n\t" \
- : "=r"(retval) \
+ : "=r"(retval),"=m"(*b_addr) \
: "0" (retval),"r" (b_addr) \
: "memory"); \
break;
@@ -129,13 +129,13 @@
} else { \
__asm__("stc ccr,%w1\n\t" \
"orc #0x80,ccr\n\t" \
- "btst %w4,@%3\n\t" \
- OP " %w4,@%3\n\t" \
+ "btst %w5,@%4\n\t" \
+ OP " %w5,@%4\n\t" \
"beq 1f\n\t" \
"inc.l #1,%0\n" \
"1:\n\t" \
"ldc %w1,ccr" \
- : "=r"(retval),"=&r"(ccrsave) \
+ : "=r"(retval),"=&r"(ccrsave),"=m"(*b_addr) \
: "0" (retval),"r" (b_addr),"r"(nr) \
: "memory"); \
} \
@@ -159,12 +159,12 @@
H8300_GEN_TEST_BITOP_CONST(OP,7) \
} \
} else { \
- __asm__("btst %w3,@%2\n\t" \
- OP " %w3,@%2\n\t" \
+ __asm__("btst %w4,@%3\n\t" \
+ OP " %w4,@%3\n\t" \
"beq 1f\n\t" \
"inc.l #1,%0\n" \
"1:" \
- : "=r"(retval) \
+ : "=r"(retval),"=m"(*b_addr) \
: "0" (retval),"r" (b_addr),"r"(nr) \
: "memory"); \
} \
@@ -183,7 +183,7 @@
static __inline__ int find_next_zero_bit (void * addr, int size, int offset)
{
- unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+ unsigned long *p = (unsigned long *)(((unsigned long)addr + (offset >> 3)) & ~3);
unsigned long result = offset & ~31UL;
unsigned long tmp;
reply other threads:[~2004-03-14 16:30 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m2brmz1jh7.wl%ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox