* [PATCH v3 1/4] dt/bindings: Add binding for the DA8xx MUSB driver
2016-10-27 9:34 [PATCH v3 0/4] Add DT support for DA8xx Alexandre Bailon
@ 2016-10-27 9:34 ` Alexandre Bailon
2016-10-31 5:14 ` Rob Herring
2016-10-27 9:34 ` [PATCH v3 2/4] usb: musb: core: added helper function for parsing DT Alexandre Bailon
` (2 subsequent siblings)
3 siblings, 1 reply; 7+ messages in thread
From: Alexandre Bailon @ 2016-10-27 9:34 UTC (permalink / raw)
To: khilman, robh+dt, b-liu
Cc: linux-kernel, linux-usb, devicetree, linux-arm-kernel,
Petr Kulhavy, Alexandre Bailon
From: Petr Kulhavy <petr@barix.com>
DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx MUSB driver.
Signed-off-by: Petr Kulhavy <petr@barix.com>
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
.../devicetree/bindings/usb/da8xx-usb.txt | 43 ++++++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/da8xx-usb.txt
diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
new file mode 100644
index 0000000..ccb844a
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
@@ -0,0 +1,43 @@
+TI DA8xx MUSB
+~~~~~~~~~~~~~
+For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
+
+Required properties:
+~~~~~~~~~~~~~~~~~~~~
+ - compatible : Should be set to "ti,da830-musb".
+
+ - reg: Offset and length of the USB controller register set.
+
+ - interrupts: The USB interrupt number.
+
+ - interrupt-names: Should be set to "mc".
+
+ - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
+
+ - phys: Phandle for the PHY device
+
+ - phy-names: Should be "usb-phy"
+
+Optional properties:
+~~~~~~~~~~~~~~~~~~~~
+ - vbus-supply: Phandle to a regulator providing the USB bus power.
+
+Example:
+ usb_phy: usb-phy {
+ compatible = "ti,da830-usb-phy";
+ #phy-cells = <0>;
+ status = "okay";
+ };
+ usb0: usb@200000 {
+ compatible = "ti,da830-musb";
+ reg = <0x00200000 0x10000>;
+ interrupts = <58>;
+ interrupt-names = "mc";
+
+ dr_mode = "host";
+ vbus-supply = <&usb_vbus>;
+ phys = <&usb_phy 0>;
+ phy-names = "usb-phy";
+
+ status = "okay";
+ };
--
2.7.3
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v3 1/4] dt/bindings: Add binding for the DA8xx MUSB driver
2016-10-27 9:34 ` [PATCH v3 1/4] dt/bindings: Add binding for the DA8xx MUSB driver Alexandre Bailon
@ 2016-10-31 5:14 ` Rob Herring
0 siblings, 0 replies; 7+ messages in thread
From: Rob Herring @ 2016-10-31 5:14 UTC (permalink / raw)
To: Alexandre Bailon
Cc: khilman, b-liu, linux-kernel, linux-usb, devicetree,
linux-arm-kernel, Petr Kulhavy
On Thu, Oct 27, 2016 at 11:34:04AM +0200, Alexandre Bailon wrote:
> From: Petr Kulhavy <petr@barix.com>
>
> DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx MUSB driver.
>
> Signed-off-by: Petr Kulhavy <petr@barix.com>
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
> .../devicetree/bindings/usb/da8xx-usb.txt | 43 ++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/da8xx-usb.txt
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v3 2/4] usb: musb: core: added helper function for parsing DT
2016-10-27 9:34 [PATCH v3 0/4] Add DT support for DA8xx Alexandre Bailon
2016-10-27 9:34 ` [PATCH v3 1/4] dt/bindings: Add binding for the DA8xx MUSB driver Alexandre Bailon
@ 2016-10-27 9:34 ` Alexandre Bailon
2016-10-30 13:35 ` Kevin Hilman
2016-10-27 9:34 ` [PATCH v3 3/4] usb: musb: da8xx: Add DT support for the DA8xx driver Alexandre Bailon
2016-10-27 9:34 ` [PATCH v3 4/4] ARM: dts: da850: Add the usb otg device node Alexandre Bailon
3 siblings, 1 reply; 7+ messages in thread
From: Alexandre Bailon @ 2016-10-27 9:34 UTC (permalink / raw)
To: khilman, robh+dt, b-liu
Cc: linux-kernel, linux-usb, devicetree, linux-arm-kernel,
Petr Kulhavy, Alexandre Bailon
From: Petr Kulhavy <petr@barix.com>
This adds the function musb_get_mode() to get the DT property "dr_mode"
Signed-off-by: Petr Kulhavy <petr@barix.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Tested-by: David Lechner <david@lechnology.com>
---
drivers/usb/musb/musb_core.c | 19 +++++++++++++++++++
drivers/usb/musb/musb_core.h | 5 +++++
2 files changed, 24 insertions(+)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 27dadc0..bba07e7 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -100,6 +100,7 @@
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/usb.h>
+#include <linux/usb/of.h>
#include "musb_core.h"
#include "musb_trace.h"
@@ -130,6 +131,24 @@ static inline struct musb *dev_to_musb(struct device *dev)
return dev_get_drvdata(dev);
}
+enum musb_mode musb_get_mode(struct device *dev)
+{
+ enum usb_dr_mode mode;
+
+ mode = usb_get_dr_mode(dev);
+ switch (mode) {
+ case USB_DR_MODE_HOST:
+ return MUSB_HOST;
+ case USB_DR_MODE_PERIPHERAL:
+ return MUSB_PERIPHERAL;
+ case USB_DR_MODE_OTG:
+ case USB_DR_MODE_UNKNOWN:
+ default:
+ return MUSB_OTG;
+ }
+}
+EXPORT_SYMBOL_GPL(musb_get_mode);
+
/*-------------------------------------------------------------------------*/
#ifndef CONFIG_BLACKFIN
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 2cb88a49..a406468 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -617,4 +617,9 @@ static inline void musb_platform_post_root_reset_end(struct musb *musb)
musb->ops->post_root_reset_end(musb);
}
+/* gets the "dr_mode" property from DT and converts it into musb_mode
+ * if the property is not found or not recognized returns MUSB_OTG
+ */
+extern enum musb_mode musb_get_mode(struct device *dev);
+
#endif /* __MUSB_CORE_H__ */
--
2.7.3
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH v3 2/4] usb: musb: core: added helper function for parsing DT
2016-10-27 9:34 ` [PATCH v3 2/4] usb: musb: core: added helper function for parsing DT Alexandre Bailon
@ 2016-10-30 13:35 ` Kevin Hilman
0 siblings, 0 replies; 7+ messages in thread
From: Kevin Hilman @ 2016-10-30 13:35 UTC (permalink / raw)
To: Alexandre Bailon
Cc: robh+dt, b-liu, linux-kernel, linux-usb, devicetree,
linux-arm-kernel, Petr Kulhavy
Alexandre Bailon <abailon@baylibre.com> writes:
> From: Petr Kulhavy <petr@barix.com>
>
> This adds the function musb_get_mode() to get the DT property "dr_mode"
>
> Signed-off-by: Petr Kulhavy <petr@barix.com>
> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> Tested-by: David Lechner <david@lechnology.com>
> ---
> drivers/usb/musb/musb_core.c | 19 +++++++++++++++++++
> drivers/usb/musb/musb_core.h | 5 +++++
> 2 files changed, 24 insertions(+)
>
> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> index 27dadc0..bba07e7 100644
> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c
> @@ -100,6 +100,7 @@
> #include <linux/io.h>
> #include <linux/dma-mapping.h>
> #include <linux/usb.h>
> +#include <linux/usb/of.h>
>
> #include "musb_core.h"
> #include "musb_trace.h"
> @@ -130,6 +131,24 @@ static inline struct musb *dev_to_musb(struct device *dev)
> return dev_get_drvdata(dev);
> }
>
> +enum musb_mode musb_get_mode(struct device *dev)
> +{
> + enum usb_dr_mode mode;
> +
> + mode = usb_get_dr_mode(dev);
> + switch (mode) {
> + case USB_DR_MODE_HOST:
> + return MUSB_HOST;
> + case USB_DR_MODE_PERIPHERAL:
> + return MUSB_PERIPHERAL;
> + case USB_DR_MODE_OTG:
> + case USB_DR_MODE_UNKNOWN:
> + default:
> + return MUSB_OTG;
> + }
> +}
> +EXPORT_SYMBOL_GPL(musb_get_mode);
> +
> /*-------------------------------------------------------------------------*/
>
> #ifndef CONFIG_BLACKFIN
> diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
> index 2cb88a49..a406468 100644
> --- a/drivers/usb/musb/musb_core.h
> +++ b/drivers/usb/musb/musb_core.h
> @@ -617,4 +617,9 @@ static inline void musb_platform_post_root_reset_end(struct musb *musb)
> musb->ops->post_root_reset_end(musb);
> }
>
> +/* gets the "dr_mode" property from DT and converts it into musb_mode
> + * if the property is not found or not recognized returns MUSB_OTG
> + */
nit: multi-line comment style
> +extern enum musb_mode musb_get_mode(struct device *dev);
> +
> #endif /* __MUSB_CORE_H__ */
Otherwise,
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Kevin
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v3 3/4] usb: musb: da8xx: Add DT support for the DA8xx driver
2016-10-27 9:34 [PATCH v3 0/4] Add DT support for DA8xx Alexandre Bailon
2016-10-27 9:34 ` [PATCH v3 1/4] dt/bindings: Add binding for the DA8xx MUSB driver Alexandre Bailon
2016-10-27 9:34 ` [PATCH v3 2/4] usb: musb: core: added helper function for parsing DT Alexandre Bailon
@ 2016-10-27 9:34 ` Alexandre Bailon
2016-10-27 9:34 ` [PATCH v3 4/4] ARM: dts: da850: Add the usb otg device node Alexandre Bailon
3 siblings, 0 replies; 7+ messages in thread
From: Alexandre Bailon @ 2016-10-27 9:34 UTC (permalink / raw)
To: khilman, robh+dt, b-liu
Cc: linux-kernel, linux-usb, devicetree, linux-arm-kernel,
Petr Kulhavy, Alexandre Bailon
From: Petr Kulhavy <petr@barix.com>
This adds DT support for TI DA8xx/OMAP-L1x/AM17xx/AM18xx MUSB driver
Signed-off-by: Petr Kulhavy <petr@barix.com>
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Tested-by: David Lechner <david@lechnology.com>
---
drivers/usb/musb/da8xx.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 210b7e4..51ae3b6 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -6,6 +6,9 @@
* Based on the DaVinci "glue layer" code.
* Copyright (C) 2005-2006 by Texas Instruments
*
+ * DT support
+ * Copyright (c) 2016 Petr Kulhavy <petr@barix.com>
+ *
* This file is part of the Inventra Controller Driver for Linux.
*
* The Inventra Controller Driver for Linux is free software; you
@@ -433,6 +436,21 @@ static int da8xx_musb_exit(struct musb *musb)
return 0;
}
+static inline u8 get_vbus_power(struct device *dev)
+{
+ struct regulator *vbus_supply;
+ int current_uA;
+
+ vbus_supply = regulator_get_optional(dev, "vbus");
+ if (IS_ERR(vbus_supply))
+ return 255;
+ current_uA = regulator_get_current_limit(vbus_supply);
+ regulator_put(vbus_supply);
+ if (current_uA <= 0 || current_uA > 510000)
+ return 255;
+ return current_uA / 1000 / 2;
+}
+
static const struct musb_platform_ops da8xx_ops = {
.quirks = MUSB_DMA_CPPI | MUSB_INDEXED_EP,
.init = da8xx_musb_init,
@@ -458,6 +476,12 @@ static const struct platform_device_info da8xx_dev_info = {
.dma_mask = DMA_BIT_MASK(32),
};
+static const struct musb_hdrc_config da8xx_config = {
+ .ram_bits = 10,
+ .num_eps = 5,
+ .multipoint = 1,
+};
+
static int da8xx_probe(struct platform_device *pdev)
{
struct resource musb_resources[2];
@@ -465,6 +489,7 @@ static int da8xx_probe(struct platform_device *pdev)
struct da8xx_glue *glue;
struct platform_device_info pinfo;
struct clk *clk;
+ struct device_node *np = pdev->dev.of_node;
int ret;
glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
@@ -486,6 +511,16 @@ static int da8xx_probe(struct platform_device *pdev)
glue->dev = &pdev->dev;
glue->clk = clk;
+ if (IS_ENABLED(CONFIG_OF) && np) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdata->config = &da8xx_config;
+ pdata->mode = musb_get_mode(&pdev->dev);
+ pdata->power = get_vbus_power(&pdev->dev);
+ }
+
pdata->platform_ops = &da8xx_ops;
glue->usb_phy = usb_phy_generic_register();
@@ -536,11 +571,22 @@ static int da8xx_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id da8xx_id_table[] = {
+ {
+ .compatible = "ti,da830-musb",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, da8xx_id_table);
+#endif
+
static struct platform_driver da8xx_driver = {
.probe = da8xx_probe,
.remove = da8xx_remove,
.driver = {
.name = "musb-da8xx",
+ .of_match_table = of_match_ptr(da8xx_id_table),
},
};
--
2.7.3
^ permalink raw reply related [flat|nested] 7+ messages in thread* [PATCH v3 4/4] ARM: dts: da850: Add the usb otg device node
2016-10-27 9:34 [PATCH v3 0/4] Add DT support for DA8xx Alexandre Bailon
` (2 preceding siblings ...)
2016-10-27 9:34 ` [PATCH v3 3/4] usb: musb: da8xx: Add DT support for the DA8xx driver Alexandre Bailon
@ 2016-10-27 9:34 ` Alexandre Bailon
3 siblings, 0 replies; 7+ messages in thread
From: Alexandre Bailon @ 2016-10-27 9:34 UTC (permalink / raw)
To: khilman, robh+dt, b-liu
Cc: linux-kernel, linux-usb, devicetree, linux-arm-kernel,
Alexandre Bailon
This adds the device tree node for the usb otg
controller present in the da850 family of SoC's.
This also enables the otg usb controller for the lcdk board.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
arch/arm/boot/dts/da850-lcdk.dts | 8 ++++++++
arch/arm/boot/dts/da850.dtsi | 15 +++++++++++++++
2 files changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 7b8ab21..9f5040c 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -158,6 +158,14 @@
rx-num-evt = <32>;
};
+&usb_phy {
+ status = "okay";
+ };
+
+&usb0 {
+ status = "okay";
+};
+
&aemif {
pinctrl-names = "default";
pinctrl-0 = <&nand_pins>;
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index f79e1b9..322a31a 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -372,6 +372,21 @@
>;
status = "disabled";
};
+ usb_phy: usb-phy {
+ compatible = "ti,da830-usb-phy";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+ usb0: usb@200000 {
+ compatible = "ti,da830-musb";
+ reg = <0x200000 0x10000>;
+ interrupts = <58>;
+ interrupt-names = "mc";
+ dr_mode = "otg";
+ phys = <&usb_phy 0>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ };
gpio: gpio@226000 {
compatible = "ti,dm6441-gpio";
gpio-controller;
--
2.7.3
^ permalink raw reply related [flat|nested] 7+ messages in thread