From: John Covici <covici@ccs.covici.com>
To: linux-kernel@vger.kernel.org
Subject: problems with multitech 4 port serial card under 2.4.x and 2.6.x
Date: Fri, 17 Sep 2004 05:19:30 -0400 [thread overview]
Message-ID: <m3656di76l.fsf@ccs.covici.com> (raw)
I have had problems with the multitech 4 port serial card under both
the 2.4 and the 2.6 Linux kernels.
I guess the most important problem is that the driver module does not
detect the card at all -- the only driver whichworks is the one from
multitech itself. Here is the lspci -v entry for the card.
0000:00:0e.0 Serial controller: Exar Corp. XR17C158 Octal UART (rev
01) (prog-if 02 [16550])
Subsystem: Unknown device 2205:2001
Flags: fast devsel, IRQ 7
Memory at fba00000 (32-bit, non-prefetchable) [size=2K]
Now also, I have an Asus a8V and if I have the apic support for uni
processors on it won't even boot with the card installed.
Any assistance on these matters would be appreciated -- especially
Any assistance on these matters would be appreciated.
--
John Covici
covici@ccs.covici.com
next reply other threads:[~2004-09-17 9:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-09-17 9:19 John Covici [this message]
2004-09-17 9:33 ` problems with multitech 4 port serial card under 2.4.x and 2.6.x Russell King
2004-09-17 9:39 ` John covici
2004-09-17 11:49 ` John covici
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3656di76l.fsf@ccs.covici.com \
--to=covici@ccs.covici.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox