From: Andi Kleen <freitag@alancoxonachip.com>
To: linux-kernel@vger.kernel.org
Cc: stephan@maciej.muc.de
Subject: Re: [BUG] 2.5.10 - kernel hangs after detecting CD/DVD ROM (was: Re: IDE problem: 2.5.10 compiles but hangs during boot)
Date: 26 Apr 2002 21:08:13 +0200 [thread overview]
Message-ID: <m3adrq6zxe.fsf@averell.firstfloor.org> (raw)
In-Reply-To: <200204251757.07947.stephan@maciej.muc.de>
Stephan Maciej <stephan@maciej.muc.de> writes:
> later
> VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
> ide0: BM-DMA at 0x1c40-0x1c47, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0x1c48-0x1c4f, BIOS settings: hdc:DMA, hdd:pio
> hda: HITACHI_DK23CA-20, ATA DISK drive
> hdc: QSI DVD-ROM SDR-081, ATAPI CD/DVD-ROM drive
>
> That's the last line I see from a 2.5.10 kernel booting up. 2.5.9 does go
> farther:
I have a similar problem on the VirtuHammer simulator. On trying to access
the virtual disk using PIO mode the simular breaks with an error
in a rep ; outsb loop complaining about "writing data while in data in phase".
I guess your problem could be the same, as the DVD is likely accessed
using PIO. 2.5.10 fails, 2.5.9 works.
-Andi
next prev parent reply other threads:[~2002-04-26 19:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-04-25 15:57 [BUG] 2.5.10 - kernel hangs after detecting CD/DVD ROM (was: Re: IDE problem: 2.5.10 compiles but hangs during boot) Stephan Maciej
2002-04-26 16:17 ` Rolf Eike Beer
2002-04-26 19:08 ` Andi Kleen [this message]
2002-04-26 21:37 ` Martin Dalecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3adrq6zxe.fsf@averell.firstfloor.org \
--to=freitag@alancoxonachip.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stephan@maciej.muc.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox