From: Andi Kleen <ak@muc.de>
To: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Cc: linux-kernel@vger.kernel.org, torvalds@transmeta.com
Subject: Re: PCI Express support for 2.4 kernel
Date: Mon, 15 Dec 2003 22:56:15 +0100 [thread overview]
Message-ID: <m3fzflpwxs.fsf@averell.firstfloor.org> (raw)
In-Reply-To: <137wc-q1-23@gated-at.bofh.it> (Vladimir Kondratiev's message of "Mon, 15 Dec 2003 21:30:24 +0100")
Vladimir Kondratiev <vladimir.kondratiev@intel.com> writes:
>
> As alternative between 1 page and 256M, I see also lazy allocation on
> per-bus basis: when bus is first accessed, ioremap 1Mb for it. On real
> system, it is no more then 3-4 buses. This way, we will end with
> several 1MB mappings. Finer granularity do not looks feasible, since
> bus scanning procedure tries to access all devices.
For bus scanning fixmaps are fine, but for the normal use of the
config space in the driver just doing ioremap once (e.g. at
pci_enable_device time) and caching it is preferable. The number of
PCI-E devices in a given system should be bounded, so e.g. when you
have 100 devices you will only lose 400kB of vmalloc space this way
which is quite reasonable.
I don't think dynamic fixmaps at each access would be a good idea.
-Andi
next parent reply other threads:[~2003-12-15 21:56 UTC|newest]
Thread overview: 80+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <12InT-wQ-5@gated-at.bofh.it>
[not found] ` <135Nw-5gv-3@gated-at.bofh.it>
[not found] ` <137wc-q1-23@gated-at.bofh.it>
2003-12-15 21:56 ` Andi Kleen [this message]
2003-12-15 22:48 ` PCI Express support for 2.4 kernel Vladimir Kondratiev
2003-12-15 23:06 ` Andi Kleen
2003-12-15 23:14 ` Greg KH
2003-12-15 20:08 Nakajima, Jun
[not found] <Pine.LNX.4.44.0312150917170.32061-100000@coffee.psychology.mcmaster.ca>
2003-12-15 15:52 ` Vladimir Kondratiev
2003-12-15 16:08 ` Kevin P. Fleming
2003-12-15 16:38 ` Vladimir Kondratiev
2003-12-15 16:55 ` Richard B. Johnson
2003-12-15 17:08 ` Tomas Szepe
2003-12-15 18:03 ` Richard B. Johnson
2003-12-15 18:15 ` Tomas Szepe
2003-12-15 18:35 ` Richard B. Johnson
2003-12-15 18:43 ` Keith Owens
2003-12-15 18:45 ` Tomas Szepe
2003-12-15 17:24 ` Vladimir Kondratiev
2003-12-15 17:22 ` Randy.Dunlap
2003-12-15 18:16 ` Greg KH
2003-12-15 18:20 ` Richard B. Johnson
2003-12-15 17:09 ` Keith Owens
2003-12-15 17:38 ` Tomas Szepe
2003-12-15 18:16 ` Keith Owens
2003-12-15 18:23 ` Tomas Szepe
[not found] <12KJ6-4F2-13@gated-at.bofh.it>
[not found] ` <12Lvu-5X5-5@gated-at.bofh.it>
[not found] ` <12XQ2-7Vs-9@gated-at.bofh.it>
2003-12-15 10:17 ` Andi Kleen
[not found] ` <12YsA-nt-1@gated-at.bofh.it>
[not found] ` <130kQ-3A0-13@gated-at.bofh.it>
[not found] ` <130Xy-4Ia-3@gated-at.bofh.it>
[not found] ` <131Ac-5Qy-3@gated-at.bofh.it>
[not found] ` <137cD-8eg-9@gated-at.bofh.it>
[not found] ` <13kD2-1kF-11@gated-at.bofh.it>
2003-12-16 17:44 ` Andi Kleen
[not found] ` <13r1S-3FB-11@gated-at.bofh.it>
[not found] ` <13vyg-43O-7@gated-at.bofh.it>
2003-12-16 22:18 ` Andi Kleen
[not found] ` <13qIi-31G-1@gated-at.bofh.it>
[not found] ` <13DvZ-2RY-9@gated-at.bofh.it>
[not found] ` <13DFw-3a8-9@gated-at.bofh.it>
[not found] ` <13DPq-3s4-7@gated-at.bofh.it>
[not found] ` <13Fem-6iy-7@gated-at.bofh.it>
[not found] ` <13SY1-35z-19@gated-at.bofh.it>
2003-12-17 23:22 ` Andi Kleen
2003-12-17 23:38 ` Alan Cox
[not found] ` <12XQc-7Vs-29@gated-at.bofh.it>
[not found] ` <12Z5u-1tG-11@gated-at.bofh.it>
2003-12-15 14:58 ` Andi Kleen
2003-12-15 15:40 ` Vladimir Kondratiev
[not found] <3FDCA569.5070006@pobox.com>
2003-12-15 4:47 ` Pete Zaitcev
-- strict thread matches above, loose matches on Subject: below --
2003-12-14 20:00 Vladimir Kondratiev
2003-12-14 20:46 ` Jeff Garzik
2003-12-15 10:01 ` Vladimir Kondratiev
2003-12-15 10:31 ` Gabriel Paubert
2003-12-15 12:44 ` Vladimir Kondratiev
2003-12-15 13:15 ` Arjan van de Ven
2003-12-15 13:58 ` Vladimir Kondratiev
2003-12-15 14:31 ` Arjan van de Ven
2003-12-15 14:44 ` Brian Gerst
2003-12-15 18:40 ` Greg KH
2003-12-15 19:23 ` Alan Cox
2003-12-15 20:00 ` Linus Torvalds
2003-12-16 10:20 ` Vladimir Kondratiev
2003-12-16 16:47 ` Linus Torvalds
2003-12-17 6:30 ` Vladimir Kondratiev
2003-12-17 6:46 ` Linus Torvalds
2003-12-17 6:55 ` Jeff Garzik
2003-12-17 7:24 ` Vladimir Kondratiev
2003-12-17 16:17 ` Linus Torvalds
2003-12-17 8:22 ` Arjan van de Ven
2003-12-17 10:35 ` Martin Mares
2003-12-17 23:06 ` Alan Cox
2003-12-17 10:08 ` Geert Uytterhoeven
2003-12-17 15:54 ` Linus Torvalds
2003-12-17 16:14 ` Geert Uytterhoeven
2003-12-17 17:44 ` Dan Hopper
2003-12-17 18:14 ` Vladimir Kondratiev
2003-12-17 21:44 ` Martin Mares
2003-12-16 17:10 ` Jeff Garzik
2003-12-16 17:48 ` Arjan van de Ven
2003-12-16 17:55 ` Jeff Garzik
2003-12-16 22:39 ` Vladimir Kondratiev
2003-12-17 0:12 ` Richard B. Johnson
2003-12-16 21:59 ` Vladimir Kondratiev
2003-12-16 17:45 ` Greg KH
2003-12-16 22:14 ` Vladimir Kondratiev
2003-12-17 10:05 ` Geert Uytterhoeven
2003-12-15 15:57 ` Vladimir Kondratiev
2003-12-15 10:42 ` Martin Mares
2003-12-15 10:07 ` Greg KH
2003-12-15 11:20 ` Vladimir Kondratiev
2003-12-14 17:28 Vladimir Kondratiev
2003-12-15 7:48 ` Christoph Hellwig
2003-12-15 18:26 ` Linus Torvalds
2003-12-15 20:03 ` Jeff Garzik
2003-12-15 22:00 ` Linus Torvalds
2003-12-16 4:53 ` Jeff Garzik
2003-12-15 20:21 ` Vladimir Kondratiev
2003-12-15 20:36 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m3fzflpwxs.fsf@averell.firstfloor.org \
--to=ak@muc.de \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
--cc=vladimir.kondratiev@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox