From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Chen-Yu Tsai <wens@kernel.org>,
Samuel Holland <samuel@sholland.org>,
Jun Yan <jerrysteve1101@gmail.com>
Cc: Jun Yan <jerrysteve1101@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: allwinner: h6: taiqicat-a01: Enable Ethernet
Date: Tue, 17 Nov 2026 17:37:55 +0100 [thread overview]
Message-ID: <n0Gb_HzYRTi_JMXR8vuZwg@gmail.com> (raw)
In-Reply-To: <20261117142122.246986-1-jerrysteve1101@gmail.com>
Dne torek, 17. november 2026 ob 15:21:21 Srednjeevropski standardni čas je Jun Yan napisal(a):
> The TaiqiCat A01 has a 100 Mbit/s Ethernet port, which uses the EPHY
> integrated into the co-packaged AC200 of the Allwinner H6 SoC.
>
> The AC200 derives its 24 MHz reference clock from PWM1, so enable the
> PWM controller and the pwm-clock node that supplies it. Also enable
> I2C3, over which the AC200 is accessed, and describe the AC200 EPHY
> package on the EMAC MDIO bus, with the EMAC operating in RMII mode.
>
> Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Best regards,
Jernej
>
> ---
> The AC200 MFD and EPHY drivers/bindings and the sun50i-h6.dtsi AC200
> description this depends on are already merged in sunxi/dt-for-7.5.
> ---
> .../dts/allwinner/sun50i-h6-taiqicat-a01.dts | 40 +++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> index 225f42bd3b9e..9b192caeecb2 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-taiqicat-a01.dts
> @@ -14,6 +14,7 @@ / {
> compatible = "ultrapower,taiqicat-a01", "allwinner,sun50i-h6";
>
> aliases {
> + ethernet0 = &emac;
> ethernet1 = &sdio_wifi;
> serial0 = &uart0;
> };
> @@ -87,6 +88,10 @@ wifi_pwrseq: wifi-pwrseq {
> };
> };
>
> +&ac200_clk {
> + status = "okay";
> +};
> +
> &cpu0 {
> cpu-supply = <®_dcdca>;
> };
> @@ -107,6 +112,14 @@ &ehci3 {
> status = "okay";
> };
>
> +&emac {
> + pinctrl-names = "default";
> + pinctrl-0 = <&rmii_pins>;
> + phy-mode = "rmii";
> + phy-handle = <&ac200_ephy>;
> + status = "okay";
> +};
> +
> &gpu {
> mali-supply = <®_dcdcc>;
> status = "okay";
> @@ -123,6 +136,29 @@ hdmi_out_con: endpoint {
> };
> };
>
> +&i2c3 {
> + status = "okay";
> +};
> +
> +&mdio {
> + ethernet-phy-package@1 {
> + compatible = "x-powers,ac200-ephy-package";
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + vcc-supply = <®_aldo2>;
> + nvmem-cells = <&ephy_calibration>;
> + nvmem-cell-names = "configuration";
> + x-powers,ac200 = <&ac200>;
> + x-powers,xmii-rx-clock-inverted;
> +
> + ac200_ephy: ethernet-phy@1 {
> + compatible = "ethernet-phy-id0044.1400";
> + reg = <1>;
> + };
> + };
> +};
> +
> &mmc0 {
> vmmc-supply = <®_cldo1>;
> cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
> @@ -173,6 +209,10 @@ &pio {
> vcc-pg-supply = <®_bldo3>;
> };
>
> +&pwm {
> + status = "okay";
> +};
> +
> &r_i2c {
> status = "okay";
>
>
prev parent reply other threads:[~2026-11-17 16:37 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-17 14:21 [PATCH] arm64: dts: allwinner: h6: taiqicat-a01: Enable Ethernet Jun Yan
2026-11-17 16:37 ` Jernej Škrabec [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=n0Gb_HzYRTi_JMXR8vuZwg@gmail.com \
--to=jernej.skrabec@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jerrysteve1101@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox