Re: [PATCH] RTC: Use fallback IRQ if PNP tables don't provide one

[Matthieu CASTET <castet.matthieu@free.fr>]

Hi,


On Mon, 28 May 2007 18:24:18 +0100, Matthew Garrett wrote:

> From: Matthew Garrett <mjg59@srcf.ucam.org>
> 
> Intel Macs (and possibly other machines) provide a PNP entry for the
> RTC, but provide no IRQ. As a result the rtc-cmos driver doesn't allow
> wakeup alarms. If the RTC is located at the legacy ioport range, assume
> that it's on IRQ 8 unless the tables say otherwise.
I post something via gmane this morning, but it seems it was lost :

Did you check if there aren't multiple configuration for rtc (one with 
irq, and
one without it) ?

What's the ouput of 
$ for i in /sys/bus/pnp/devices/*; do if [ "$(cat $i/id)" = PNP0b00 ]; 
then cat
$i/resources; echo options; cat $i/options; fi; done

Matthieu